复合材料层合结构层向理论及应用进展

层向理论是由Reddy提出来的一种用于精确分析复合材料层合结构的三维板壳分析理论。由于不引入任何的变形和应力假设条件,因此相较于传统的等效单层板理论,层向理论在分析大厚度复合材料层合板壳结构的静动态响应及其局部层间效应时具有较大的优势。系统地综述了层向理论近年来的研究进展、数值解法及其应用情况。具体包括:层向理论的基本原理及发展现状、基于层向理论的有限元方法及改进模型、层向理论在复合材料层合结构静动态响应及含损伤问题领域的应用等。并对该理论可进一步拓展的研究方向进行了展望。     

金属复合板的消防安全性能探讨

随着我国科技进步及建筑节能需要，特别是近年钢结构建筑体系的推广，金属复合板得到迅猛发展。从分析金属复合板的材料性能和火灾特点入手，就工程施工、使用过程中存在的消防安全问题及防范措施进行了探析。     

Damage of multi-layer spaced metallic target plates impacted by radial layered PELE

Three different kinds of PELE (the penetrator with lateral efficiency) were launched by ballistic artillery to impact the multi-layer spaced metal target plates. The impact velocities of the projectiles were measured by the velocity measuring system. The damage degree and process of each layer of target plate impacted by the three kinds of projectiles were analyzed. The experimental results show that all the three kinds of projectiles have the effect of expanding holes on the multi-layer spaced metal target plates. For the normal structure PELE(without layered) with tungsten alloy jacket and the radial layered PELE with tungsten alloy jacket, the diameters of holes on the second layer of plates are 3.36 times and 3.76 times of the diameter of the projectile, respectively. For radial layered PELE with W/Zr-based amorphous composite jacket, due to the large number of tungsten wires dispersed after the impact, the diameter of the holes on the four-layer spaced plates can reach 2.4 times, 3.04 times, 5.36 times and 2.68 times of the diameter of the projectile. Besides, the normal structure PELE with tungsten alloy jacket and the radial layered PELE whit tungsten alloy jacket formed a large number of fragments impact marks on the third target plate. Although the number of fragments penetrating the third target plate is not as large as that of the normal structure PELE, the area of dispersion of fragments impact craters on the third target plate is larger by the radial layered PELE. The radial layered PELE with W/Zr-based amorphous composite jacket released a lot of heat energy due to the impact of the matrix material, and formed a large area of ablation marks on the last three target plates.     

横向运动板对长杆弹变形及运动影响的数值研究

利用Ls—DYNA软件对钨合金长杆弹垂直侵彻单层和双层横向运动钢板进行了数值计算。通过分析长杆弹的塑性变形、速度降、动能降和横向速度，得到了单层和双层板横向运动速度与影响长杆弹侵彻能力因素的关系。仿真结果表明：随着运动板速度的增加，运动板对长杆弹的侵蚀加剧，长杆弹的速度降、动能降增大；运动板相同速度下，虽然单层板的冲击能使长杆弹获得较大横向速度，但双层板比单层板对长杆弹的干扰效果更明显。     

超音速等离子喷涂连续梯度热障涂层工艺优化研究

采用"双通道、双温区"超音速等离子喷涂工艺制备了Ce-YSZ/NiCoCrAlY连续梯度热障涂层(CG-TBCs)。借助热喷涂粒子状态在线监测系统Spraywatch-2i,分别研究了电弧功率、喷涂距离对Ce-YSZ/NiCoCrAlY粒子速度和温度的影响。实验结果表明,当电弧功率为70 kW和68 kW时,Ce-YSZ与NiCoCrAlY粒子速度达到最高,分别为620 m/s和430 m/s。Ce-YSZ和NiCoCrAlY粉末粒子的平均温度均随电弧功率的增加而上升,但当功率分别达到60 kW和65 kW时,粒子温度的上升趋势不再明显。电弧功率选择在68 kW,喷涂距离定为90 mm左右时,制备的CG-TBCs在经历100次热循环后,其表面和内部均未出现明显的裂纹,具有优异的热震性能。     

Statistical variability and fragility assessment of ballistic perforation of steel plates for 7.62 mm AP ammunition

The paper describes field test results of 7.62 × 51 mm M61 AP (armour piercing) ammunition fired into mild steel targets at an outdoor range. The targets varied from 10 mm to 32 mm in thickness. The tests recorded penetration depth, probability of perforation (i.e., complete penetration), muzzle and impact velocities, bullet mass, and plate yield strength and hardness. The measured penetration depth exhibited a variability of approximately ±12%. The paper then compared ballistic test results with predictive models of steel penetration depth and thickness to prevent perforation. Statistical parameters were derived for muzzle and impact velocity, bullet mass, plate thickness, plate hardness, and model error. A Monte-Carlo probabilistic analysis was then developed to estimate the probability of plate perforation of 7.62 mm M61 AP ammunition for a range of impact velocities, and for mild steels, and High Hardness Armour (HHA) plates. This perforation fragility analysis considered the random variability of impact velocity, bullet mass, plate thickness, plate hardness, and model error. Such a probabilistic analysis allows for reliability-based design, where, for example, the plate thickness with 95% reliability (i.e. only 1 in 20 shots will penetrate the wall) can be estimated knowing the probabilistic distribution of perforation. Hence, it was found that the plate thickness to ensure a low 5% probability of perforation needs to be 11–15% thicker than required to have a 50/50 chance of perforation for mild steel plates. Plates would need to be 20–30% thicker if probability of perforation is reduced to zero.     

基于双波段红外辐射信息的红外机动目标跟踪算法

利用双波段IRST系统测到的目标双波段红外辐射信息,推导出目标的伪距离量测信息,使得单站IRST系统变为可观测系统;在此基础上,构建了伪量测方程,采用改进的"当前"统计模型和基于最小偏度单形采样策略的UKF算法,提出了一种基于双波段红外辐射信息的IRST机动目标跟踪算法。理论分析与仿真结果表明,该算法能够有效地跟踪机动目标,具有良好的实际应用价值。     

无电焊接中厚度钢板焊接接头的组织结构与性能研究

采用无电焊接方法对12mm厚度钢板进行了焊接。分析了满足中厚度钢板焊接能量要求的技术途径;利用SEM,EDS,XRD等手段观察、分析了焊缝的组织成分与显微结构;测试了焊接接头的拉伸强度、弯曲强度、显微硬度等力学性能。结果表明:在选择高放热体系基础上,通过增大焊接笔直径、减小反应物料粒径、提高压坯密度等方法,可以有效增大焊接热效率,从而满足中厚度钢板焊接能量需求;焊缝组织分为热影响区、熔合区与合金区,焊缝合金与母材间通过熔合区形成了冶金结合;焊接接头因固溶强化和析晶强化的作用,具有良好的力学性能,拉伸强度、平均显微硬度与弯曲强度分别为357MPa、186HV0.2与644MPa,达到了野战应急抢修技术要求。     

Influence of active constrained layer damping on the coupled vibration response of functionally graded magneto-electro-elastic plates with skewed edges

This article makes the first attempt in assessing the influence of active constrained layer damping (ACLD) treatment towards precise control of frequency responses of functionally graded skew-magneto-electro-elastic (FGSMEE) plates by employing finite element methods. The materials are functionally graded across the thickness of the plate in terms of modest power-law distributions. The principal equations of motion of FGSMEE are derived via Hamilton’s principle and solved using condensation technique. The effect of ACLD patches are modelled by following the complex modulus approach (CMA). Additionally, distinctive emphasis is laid to evaluate the influence of geometrical skewness on the attenuation capabilities of the plate. The accuracy of the current analysis is corroborated with comparison of previous researches of similar kind. Additionally, a complete parametric study is directed to understand the combined impacts of various factors like coupling fields, patch location, fiber orientation of piezoelectric patch in association with skew angle and power-law index.