装备物资混装配载效益化特征聚类分析

提出了通过对物资聚类分组来分步解决混装配载问题的思想,分析了装备物资混装配载中物资分类的办法,讨论了使用聚类分析法研究分类问题的特点,给出了一种基于系统聚类法的物资效益化特征分组方法。     

自蔓延高温合成技术的研究动态

对自蔓延高温合成技术(SHS)的最新研究动态进行了介绍,指出SHS技术作为一种制备和合成材料的新技术,以其高效、节能、经济、材料性能优良等优点,现已成为制备新材料的崭新途径,并提出自蔓延高温合成技术今后的研究方向。     

高硬热喷涂层的缓进给切削试验

采用高硬材料切削过程中常用的2种刀具材料CBN和YG610,应用缓进给的模式对高硬喷涂层进行切削试验。试验结果表明：采用小进给切削模式YG610刀具切削高硬热喷涂层可以获得较理想的刀具耐用度,并且加工表面质量可以达到Ra1以下,具备了以车代磨的基本条件。高硬材料切削常用的刀具CBN在切削过程中出现了较严重的非正常破损现象。通过对试验现象的分析,可以认为冲击性和高硬度的同时存在是喷涂层切削的最重要特性。因此,喷涂层切削刀具需要同时具备较高的韧性和硬度。     

“E体化”军事物流的建设与发展

根据未来高技术战争和信息技术的发展趋势,提出了建设"E体化"军事物流的宏观战略构想,论述了"E体化"军事物流的理论内涵和现实意义,明确提出了"E体化"军事物流的战略目标以及目标实现的关键基础体系.     

EDITOR'S NOTE

The Nonproliferation Review (NPR) recently interviewed Ambassador Sergio de Queiroz Duarte of Brazil, who presided over the 2005 Seventh Review Conference of the Treaty on the Non-Proliferation of Nuclear Weapons (NPT). Ambassador Duarte discussed his views on the outcome of the conference and the future of the treaty. He provided NPR with valuable insights into the outcome of the conference and also shared his thoughts on some of the most pressing issues confronting the NPT today, including the Middle East, nuclear terrorism, elimination of the threat of highly enriched uranium in the civilian nuclear sector, proposals to limit access to the nuclear fuel cycle, nuclear disarmament, and negative security assurances. Blaming the failed conference on a general lack of political commitment among states parties and their unwillingness to negotiate common solutions, Ambassador Duarte stressed that “the conference should face squarely its own failure without my attempting to disguise or sugarcoat the deep differences of view, which must be resolved with courage and determination by the states parties if they want the treaty to remain effective.”?He emphasized that if states fail to act on their overriding interest in upholding the NPT, especially if states parties continue to ignore or disregard their nonproliferation and nuclear disarmament obligations, some states might come to believe that their security interests are no longer served by the treaty. The future prospects of the NPT would then “look dire indeed.”     

膨润土-砂混合型缓冲／回填材料液塑限试验

为研究掺砂率对高庙子膨润土一砂混合型缓冲／回填材料液塑限的影响,利用液塑限联合测定仪进行了试验研究,并运用最小二乘法对混合物液塑限试验数据进行了分析。试验结果表明膨润土一砂混合物的可塑性、液塑限值和塑性指数均随掺砂率的增大而降低。对试验结果进行分析,得到了考虑掺砂率影响的混合物液塑限经验公式。混合物的液塑限并不是随掺砂率增大成比例降低,而是液限的实测值小于理论值,塑限的实测值大于理论值。得到的不同掺砂率的膨润土一砂混合型缓冲／回填材料液塑限试验数据可为高放废物深地质处置库建设提供科学依据。     

聚合物材料热危险性分析

聚合物材料具有的易燃性或可燃性使其在实际应用中具有潜在的火灾危险性,正确分析评价聚合物材料的火灾危险性,对材料的安全使用和火灾预防与控制具有重要的作用。在综述文献的基础上,根据火灾危害的特征,对聚合物材料的引燃、热释放和火焰传播等热危险性进行了分析和总结,并提出了相应的预防对策。     

Maximizing deviation method for multiple attribute decision making under q-rung orthopair fuzzy environment

Because of the uncertainty and subjectivity of decision makers in the complex decision-making environment, the evaluation information of alternatives given by decision makers is often fuzzy and uncertain. As a generalization of intuitionistic fuzzy set (IFSs) and Pythagoras fuzzy set (PFSs), q-rung orthopair fuzzy set (q-ROFS) is more suitable for expressing fuzzy and uncertain information. But, in actual multiple attribute decision making (MADM) problems, the weights of DMs and attributes are always completely unknown or partly known, to date, the maximizing deviation method is a good tool to deal with such issues. Thus, combine the q-ROFS and conventional maximizing deviation method, we will study the maximizing deviation method under q-ROFSs and q-RIVOFSs in this paper. Firstly, we briefly introduce the basic concept of q-rung orthopair fuzzy sets (q-ROFSs) and q-rung interval-valued orthopair fuzzy sets (q-RIVOFSs). Then, combine the maximizing deviation method with q-rung orthopair fuzzy information, we establish two new decision making models. On this basis, the proposed models are applied to MADM problems with q-rung orthopair fuzzy information. Compared with existing methods, the effectiveness and superiority of the new model are analyzed. This method can effectively solve the MADM problem whose decision information is represented by q-rung orthopair fuzzy numbers (q-ROFNs) and whose attributes are incomplete.     

The effect of sintering and cooling process on geometry distortion and mechanical properties transition of PTFE/Al reactive materials

In this research, the effect of the sintering and cooling process on geometry distortion and mechanical properties of PTFE/Al reactive material is investigated. Six particularly selected sintering temperatures, three different cooling modes (annealing cooling, normalizing cooling and rapid cooling), three different initial cooling temperatures, as well as six different final cooling temperatures were designed to compare the effects of sintering temperature, cooling rate, initial cooling temperature and final cooling temperature on the properties of reactive materials. Geometry distortion was quantitatively analyzed by a statistic on the dimensional changes of the specimens and microscopic morphology. A mechanical response properties transition from brittle to ductile was found and analyzed. By combining the thermodynamic properties of PTFE and unsteady heat conduction theory, mechanisms of cooling induced morphology change, temperature induced distortion and strength decrease were obtained. The results showed that the cooling rate has the most significant effect on the morphology transformation, while initial cooling temperature has more significant effect on the dimensional distortion than final cooling temperature. As to the mechanical properties transition from brittle to plastic, a more prominent effect of initial cooling temperature than cooling rate and final temperature was revealed.     

压电材料中的共线非等长多裂纹问题

建立了横观各向同性压电材料中的共线非等长多裂纹模型。将裂纹模拟为连续分布的广义位错,推导了单点广义位错的格林函数,并基于此得到了共线非等长多裂纹的奇异积分方程组,最后由数值计算给出了裂纹尖端的能量释放率。对奇异积分方程组的退化分析和对称条件下的数值结果的讨论,验证了本文结果的正确性。研究表明:当共线裂纹间距小于裂纹长度时,裂纹尖端场存在显著的干涉效应;裂纹越长,干涉效应越显著;电载荷系数越大,能量释放率也越大;相对于外侧尖端而言,共线裂纹内侧尖端对电载荷系数更为敏感。