YFRIO 实时I/O语言与YFSIM 仿真语言的同步关系

本文介绍ＹＦＲＩＯ语言和ＹＦＳＩＭ语言的同步关系,阐述了两者同步的硬件、软件机制,以及如何进行程序设计。     

微机上运行的多功能仿真语言GASP/PC

文中介绍了IRM-PC机上多功能仿真软件GASP/PC的开发,叙述了GASP/PC仿真语言的形成以及对于连续、离散和复合仿真模型的GASP/PC语言的结构与仿真方法。     

Probabilistic analysis of an asymptotically optimal solution for the completion time variance problem

Scheduling a set of n jobs on a single machine so as to minimize the completion time variance is a well‐known NP‐hard problem. In this paper, we propose a sequence, which can be constructed in O(n log n) time, as a solution for the problem. Our primary concern is to establish the asymptotical optimality of the sequence within the framework of probabilistic analysis. Our main result is that, when the processing times are randomly and independently drawn from the same uniform distribution, the sequence is asymptotically optimal in the sense that its relative error converges to zero in probability as n increases. Other theoretical results are also derived, including: (i) When the processing times follow a symmetric structure, the problem has 2^{⌊(n−1)/2⌋} optimal sequences, which include our proposed sequence and other heuristic sequences suggested in the literature; and (ii) when these 2^{⌊(n−1)/2⌋} sequences are used as approximate solutions for a general problem, our proposed sequence yields the best approximation (in an average sense) while another sequence, which is commonly believed to be a good approximation in the literature, is interestingly the worst. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 373–398, 1999     

聚钛碳硅烷的新合成法及其研究

从聚硅烷(PS)与钛酸丁酯。(Ti(OBu)_4)出发,不采用任何反应促进剂直接合成了含钛碳化硅纤维的先驱体聚钛碳硅烷(PTC)。在这一反应中,PS 首先裂解成含Si—C 骨架与Si—H 键的低分子聚硅烷(LPS)。然后,由LPS 中的Si—H 键与Ti(OBu)_4的反应以及LPS 的Si—Si 骨架裂解转化为Si—C 骨架的反应制得了PTC.本文对这种新合成法所涉及的反应过程进行了研究,并比较了新旧两法得到的PTC—1与PTC—Ⅱ的结构异同,报告了以新法制得的PTC—Ⅱ为先驱体得到的含钛碳化硅纤维的优良性能。     

指挥所目标识别专家系统的实现

在分析国内外敌我识别技术的现状及发展趋势的基础上,针对我军的具体实际,利用专家系统技术,提出了基于多情报源信息融合技术的目标识别方法,并给出了基于客户/服务器模式的系统实现结构图。     

Preparation and property of CL-20/BAMO-THF energetic nanocomposites

A sol-gel freezing-drying method was utilized to prepare energetic nanocomposites based on 2, 4, 6, 8, 10, 12-hexanitro-2, 4, 6, 8, 10, 12-hexaazaisowurtzitane (CL-20) with 3, 3-Bis (azidomethyl) oxetane-tetrahydrofuran copolymer (BAMO-THF) as energetic gel matrix. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman, Fourier-transform infrared spectroscopy (FT-IR) and differential thermal analyser (DTA) were utilized to characterize the structure and property of the resultant energetic nanocomposites. Compared with raw CL-20, the average particle sizes of CL-20 in CL-20/BAMO-THF energetic nanocomposites were decreased to nano scale and the morphologies of CL-20 were also changed from prismatic to spherical. FT-IR detection revealed that CL-20 particles were recrystallized in BAMO-THF gel matrix during the freezing-drying process. The thermal decomposition behaviors of the energetic nanocomposites were investigated as well. The thermolysis process of CL-20/BAMO-THF nanocomposites was enhanced and the activation energy was lower compared with that of raw CL-20, indicating that CL-20/BAMO-THF nanocomposites showed high thermolysis activity. The impact sensitivity tests indicated that CL-20/BAMO-THF energetic nanocomposites presented low sensitivity performance.     

独特的微机正弦扫频振动控制技术

以通用微机为主控单元进行正弦扫频振动控制的独特之处在于驱动信号的生成、修正,响应信号的采样、分析以及系统传递函数计算等控制功能均主要由微机软件完成。本文主要介绍上述控制功能的软件设计原理,并给出相应的实验结果。     

备件冷储备方案下装备群任务可靠性建模

针对具有相同结构功能的装备群系统可靠性评估问题,根据任务周期内对装备完好数的要求,合理表示了系统状态转移过程。以部件任务期间状态变化为研究对象,将系统等效表示为多阶段任务系统,即串行k/N(G)系统。在确定系统可行状态过程基础上,分别建立了部件寿命分布在3种不同情形下的系统任务可靠性模型,并分析了备件冷储备方案的影响。为确定系统任务期间备件携带量提供决策支持,最后给出了一个应用实例。     

改性 C／C 复合材料快速制备与抗烧蚀性能考核

采用液相浸渍法结合反应熔渗法快速制备了改性C/C复合材料，研究其微观组织及在氧乙炔焰和高频等离子体风洞环境中的烧蚀行为。结果表明：改性C/C复合材料主要含有HfC、ZrC、TaC等高熔点陶瓷改性相，其密度为3.83g/cm3，开孔率仅为4.71%。氧乙炔焰烧蚀360s后，改性C/C复合材料表面形成一层主要由HfO2、ZrO2、Ta2O5组成的致密氧化物层，材料的线烧蚀率为0.00518mm/s。使用高频等离子体风洞考核改性C/C复合材料球头模型，在热流量3.5MW/m2、驻点温度2293℃的条件下考核180s后，模型表面生成致密光滑的氧化物保护层，与基体结合牢固，模型形状及尺寸无明显改变，去掉氧化物后测得其线烧蚀率为0.00172mm/s。     

熵权正负理想方案灰色关联法的对地攻击目标选择

针对攻击机对地攻击的目标选择问题,提出了目标攻击优先权的计算方法,将正负理想方案与灰色关联分析方法进行融合并引进熵权的思想为各项优先权赋值,避免了权值确定过于主观的问题,提出了一种目标选择的模型,为飞行员对地攻击目标选择提供了辅助决策,具有较高的实用性。仿真结果也说明了该方法的合理性。