Improvement of VIS and IR camouflage properties by impregnating cotton fabric with PVB/IF-WS2

In order to examine the possibility to improve its camouflage properties standard cotton fabric with camouflage print was impregnated with poly(vinyl butyral), PVB and fullerene-like nanoparticles of tungsten disulfide, PVB/IF-WS₂. FTIR analysis excluded any possible chemical interaction of IF-WS₂ with PVB and the fabric. The camouflage behavior of the impregnated fabric has been examined firstly in the VIS part of the spectrum. Diffuse reflection, specular gloss and color coordinates were measured for three different shades (black, brown and dark green). Thermal imaging was applied to examine the camouflage abilities of this impregnation in IR part of the spectrum. The obtained results show that PVB/IF-WS₂ impregnation system induced enhacement of the materials camouflage properties, i.e. that IF-WS₂ have a positive effect on spectrophotometric characteristics of the fabric.     

聚硅氧烷先驱体转化制备2D Cf/Si-O-C材料

以二维碳纤维布和廉价的聚硅氧烷为原料,采用先驱体转化工艺制备2D Cf/Si-O-C材料,对其力学性能进行了考察,并与以聚碳硅烷为先驱体制备的2D Cf/SiC材料在价格和性能方面进行了对比。实验表明,2D Cf/Si-O-C材料力学性能较2D Cf/SiC材料有所下降,但成本大大降低。2D Cf/Si-O-C材料弯曲强度达到157.9 MPa,断裂韧性达到8.4MPa.m1/2,剪切强度达到23.4MPa,并且在1400℃下能较好保持材料的力学性能。     

Recent advances in the synthesis and energetic properties of potassium-based potential green primary explosives

Primary explosives are utilized as a reliable initiator for secondary explosives in an extensive range of military and civilian operations. Heavy–metal–based primary explosives are moderate performing, more sensitive, and environmentally hazardous, posing a direct and indirect threat to health and safety. Therefore, heavy–metal–based primaries have been replaced by environment-friendly metal-based primary explosives, such as potassium complexes. This review presents not only a summary of the current progress of new-generation potassium-based primary explosives and their methods of preparation, energetic properties, and applications, but also a further comparison with traditional primary explosives. In addition, this work discusses the necessity of heavy metal–free primary explosives and the major challenges faced in replacing traditional primary explosives.     

新型夜瞄复合荧光材料在步兵轻武器中的应用研究

采用自制的复合荧光粉体和化学载体成分,研制出一种步兵轻武器新型夜瞄复合荧光材料.试验研究和实际使用结果表明,研制的新材料发光时间长、亮度高,具有良好的耐温、耐腐蚀性能,不受轻武器的日常使用和维护影响,可满足步兵轻武器夜间瞄准需求.     

树脂浸渍裂解对气相硅反应渗透C/SiC的影响

粘胶基碳纤维毡经过CVD工艺进行沉积碳增密处理后,采用酚醛树脂浸渍—裂解对C/C素坯的密度进行调节,通过气相硅渗透反应工艺制备了C/SiC复合材料。研究了树脂浸渍—裂解对C/C素坯密度和气孔率的影响规律,分析了树脂裂解碳对C/SiC显微形貌和力学性能的影响。结果表明:随着树脂浸渍—裂解循环次数的增加,素坯密度增加,孔隙率降低;裂解碳含量为27wt%时,C/SiC复合材料的强度和模量达到最大,分别为231MPa和209GPa。通过控制裂解碳含量,可以实现对C/SiC复合材料力学性能和微观结构的裁剪。     

Effect of fusion welding processes on tensile properties of armor grade,high thickness,non-heat treatable aluminium alloy joints

AA5059 is one of the high strength armor grade aluminium alloy that finds its applications in the military vehicles due to the higher resistance against the armor piercing (AP) threats. This study aimed at finding the best suitable process among the fusion welding processes such as gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) by evaluating the tensile properties of AA5059 aluminium alloy joints. The fracture path was identified by mapping the low hardness distribution profile (LHDP) across the weld cross section under tensile loading. Optical and scanning electron microscopies were used to characterize the microstructural features of the welded joints at various zones. It is evident from the results that GTAW joints showed superior tensile properties compared to GMAW joints and this is primarily owing to the presence of finer grains in the weld metal zone (WMZ) and narrow heat-affected zone (HAZ). The lower heat input associated with the GTAW process effectively reduced the size of the WMZ and HAZ compared to GMAW process. Lower heat input of GTAW process results in faster cooling rate which hinders the grain growth and reduces the evaporation of magnesium in weld metal compared to GMAW joints. The fracture surface of GTAW joint consists of more dimples than GMAW joints which is an indication that the GTAW joint possess improved ductility than GMAW joint.     

感烟火灾探测器响应模拟问题研究

通过介绍感烟火灾探测器响应模拟的不同方法,给出了感烟火灾探测器响应模拟所存在的问题及在设计安装过程中所需的性能参数,提出了解决这些问题的思路和方法。同时为进一步提高感烟火灾探测器对火灾信号的准确响应,指出了今后火灾中烟气性能参数的研究方向。     

安静型夹芯复合材料舵设计及其力学性能分析

通过对夹芯复合材料各层材料的选择,以及夹芯复合材料舵壳的结构设计,提出了夹芯复合材料舵的设计方案和制作工艺。并利用有限元方法计算了复合材料舵壳在流体压力作用下的应力和变形,以及在瞬态载荷作用下舵壳的振动响应。计算结果表明,夹芯复合材料舵壳满足结构的强度和刚度的要求,同时振动水平与钢舵比较有很大的改善。     

碳化硼涂覆的碳纤维的抗热氧化性研究

用自己合成的裂解能得到碳化硼的聚碳硼烷,对碳纤维进行涂层,并详细测试了涂层碳纤维的抗热氧化性能。     

注胶修复工艺的耐高温环氧树脂体系工艺性能

针对注胶修复工艺要求,采用差示扫描量热法热分析和流变仪测试三种中温固化配方的耐高温缩水甘油胺型环氧树脂体系的固化特性和化学流变特性,通过对比分析三种配方树脂体系的固化条件和黏度特性,确定MF-4101/ZH110/DMP-30树脂体系为最适宜注胶修复工艺的配方。建立该树脂体系在等温条件下黏度特性曲线的Daul Arrhenius模型和高阶指数拟合模型。结果表明,高阶指数拟合模型的预测精度和适用范围均优于Daul Arrhenius模型,预测黏度与实验结果具有良好的一致性,根据高阶指数拟合模型建立的黏度随温度、时间变化的唯象关系式,可以准确地预报修复树脂体系的工艺窗口。