液态聚硅烷高温高压合成聚碳硅烷工艺研究

以聚二甲基硅烷裂解制备的液态聚硅烷(LPS)为原料,在高压釜内高温高压反应制备了聚碳硅烷(PCS)先驱体,研究了合成条件对反应终压、Si H键含量、产物产率、软化点、分子量分布及可纺性的影响。研究表明,随着反应温度的提高、反应时间的延长,反应终压逐渐增大,产物的分子量与软化点增高,但同时分子量的分散性增大,使可纺性变差。当LPS在高压釜内460℃下反应3～4h,或450℃下反应6～7h时,可以制得软化点约为210～230℃的PCS,其高分子部分含量约5wt%～10wt%,Si H键含量大于0.9,可纺性较好,适合于制备SiC纤维。     

三轴光纤陀螺复用方案的初步探讨

分析了三轴光纤陀螺组合技术方案的光路和电路结构,设计了一种三轴光纤陀螺时分复用方案,对比了试验样机分时与不分时的性能指标．     

复合陶瓷含片状夹杂共晶体的理论断裂强度

应用四相模型法研究含片状夹杂复合共晶体的细观应力场．在基体、界面相和片状夹杂为各向同性的条件下,得到细观应力分布规律,并表现出明显的尺度效应．应用位错塞积理论研究片状夹杂内的位错运动,通过两相界面处位错塞积产生的应力集中确定其在基体内产生的最大张应力,导致基体首先被破坏失效,当基体内最大张应力等于分子理论的断裂强度时,得到共晶体断裂强度的理论表达式．结果表明：含片状夹杂共晶复合陶瓷强度随夹杂厚度增加而减小．     

陶瓷基复合装甲防12.7mm穿甲燃烧弹的靶试研究（Ⅰ）

基于对材料特性和防弹机理的认识,设计了由Al2O3陶瓷、616装甲钢和高强PE材料构成的陶瓷基复合装甲板,并用现役127.mm穿甲燃烧弹进行靶试考核,检验靶板设计思路,结果表明：防护面密度为128 kg/m2的靶板可防住该弹。     

航天测控通信系统可靠性分析的Krylov子空间投影算法

基于Markov模型对航天测控通信系统进行可靠性分析的过程中,若系统中测控通信设备数量较多,模型中的状态空间随设备数量呈指数增长,将会导致数值计算困难.提出了一种基于Krylov子空间技术的可靠性分析方法,将大规模问题投影至小规模子空间中,求得问题的近似解.实验结果证明,Krylov子空间方法的计算速度及精度优于Ross方法和前向Euler法(forward Euler method,FEM).     

石英/双酚E型氰酸酯复合材料的制备与性能

采用实验方法研究双酚E型氰酸酯树脂的黏度和固化特性,揭示催化剂对双酚E型氰酸酯树脂固化特性的影响规律;采用树脂传递模塑和真空导入模塑工艺制备石英纤维/双酚E型氰酸酯复合材料,并考察其力学性能。结果表明,双酚E型氰酸酯树脂室温至90℃范围内的黏度小于300 m Pa·s,凝胶时间大于10 h,起始固化温度、固化温度和终止固化温度分别为186±5℃,235±5℃和286±5℃;固化特征温度随着催化剂含量的增加而降低,直至催化剂饱和,其饱和范围为0.02%~0.03%,可使双酚E型氰酸酯树脂体系的固化温度降低约60℃,从而避免爆聚,实现液相法成型其复合材料;真空导入模塑工艺制备的石英纤维/双酚E型氰酸酯复合材料的力学性能明显优于树脂传递模塑制备试样。     

The effects of model parameter deviations on the variance of a linearly filtered time series

We consider a general linear filtering operation on an autoregressive moving average (ARMA) time series. The variance of the filter output, which is an important quantity in many applications, is not known with certainty because it depends on the true ARMA parameters. We derive an expression for the sensitivity (i.e., the partial derivative) of the output variance with respect to deviations in the model parameters. The results provide insight into the robustness of many common statistical methods that are based on linear filtering and also yield approximate confidence intervals for the output variance. We discuss applications to time series forecasting, statistical process control, and automatic feedback control of industrial processes. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

增强材料芳纶纤维在减振降噪橡胶制品中的应用

论述了橡胶制品用骨架材料芳纶纤维的发展、结构及其性能,并结合橡胶减振消声制品的发展,阐述了芳纶纤维在该类产品中的潜在应用前景.     

Fabrication of AA7005/TiB2-B4C surface composite by friction stir processing: Evaluation of ballistic behaviour

The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB₂ and B₄C ceramic reinforcement particles. Surface composites with different weight fractions of TiB₂ and B₄C particles were processed by friction stir processing. Micro-hardness and depth of penetration tests were carried out to evaluate the ballistic properties of the surface composites. The surface hardness of the composite was found to be nearly 70 HV higher than base alloy. The depth of penetration of the steel projectile was 20–26 mm in the composites as compared to 37 mm in the base alloy. Ballistic mass efficiency factor of the surface composite was found to be 1.6 times higher than base alloy. This is mainly attributed to the dispersion strengthening from the reinforcement particles.     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008