地空导弹兵混编群作战仿真研究

应用离散事件动态系统仿真的基本理论,建立了地空导弹兵混编群作战过程仿真模型,并用Arena仿真平台实现了仿真。通过仿真实例,分析了不同空袭目标流密度和空袭目标采取低空突防时对目标突防概率的影响。仿真结果表明,在该实例中,增大空袭目标流密度对目标突防概率没有显著的影响,而采取低空突防对目标突防概率影响显著。最后,对仿真结果进行了分析,证明了仿真模型的有效性。     

新型钢-混凝土组合板的力学性能研究

以加劲肋形式、组合板厚度和栓钉布置为参数,进行了9块新型组合板的力学性能试验.试验结果表明,组合板的正截面承载力可按基于修正平截面假定的极限状态计算;组合板的跨中挠度,可在按现行规范计算的基础上,加上考虑界面滑移影响的附加变形值予以修正.     

基于静力与稳定性分析的小卫星主接头选型优化

基于对预埋主接头蜂窝板的静力与稳定性分析,对小卫星主接头进行选型优化。采用三明治夹心板理论建立预埋分叉式和面板式小卫星主结构连接接头的蜂窝板试件有限元模型,分析得到了蜂窝板最大应力值与失稳载荷,通过与试验结果的对比分析确定了蜂窝板试件破坏原因。在此基础上讨论结构参数对蜂窝板承载性能的影响,确定出最优的接头设计形式。     

Influence of thickness and projectile shape on penetration resistance of the compliant composite

The present study deals with development of conceptual proof for jute rubber basedflexible composite block to completely arrest the projectile impacting the target at high velocity impact of 400 m/s through numerical simulation approach using finite element (FE) method. The proposed flexible composite blocks of repeating jute/rubber/jute (JRJ) units are modelled with varying thickness from 30 mm to 120 mm in increments of 30 mm and impacted by flat (F), ogival (O) and hemispherical (HS) shaped projectiles. All the considered projectiles are impacted with proposed flexible composite blocks of different thicknesses and the penetration behaviour of the projectile in each case is studied. The penetration depth of the projectile in case of partially penetrated cases are considered and the effect of thickness and projectile shape on percentage of penetration depth is statistically analyzed using Tagu-chi's design of experiments (DOE). Results reveal that the though proposedflexible composite block with thickness of 90 mm is just sufficient to arrest the complete penetration of the projectile, considering the safety issues, it is recommended to use theflexible composite with thickness of 120 mm. The nature of damage caused by the projectile in the flexible composite is also studied. Statistical studies show that thickness of the block plays a prominent role in determining the damage resistance of the flexible composite.     

Fabrication and analysis of TIG welding-brazing butt joints of in-situ TiB2/7050 composite and TA2

Lightweight hybrid structures of Al MMCs and titanium alloy dissimilar materials have great prospect in the defence industry application. So, it is necessary to join Al MMCs with Ti metal to achieve this structural design. In this work, in-situ TiB2/7050 composite and TA2 were firstly attempted to join by TIG welding-brazing technique. The result was that the intact welding-brazing butt joint was successfully fabricated. The joint presents dual characteristics, being a brazing on TA2 side and a welding on TiB2/7050 side. At brazing joint side, ER4043 filler metal effectively wets on TA2 under TIG heating condition, and a continuous interfacial reaction layer with 1—3μm is formed at welded metal/TA2 interface. The whole interfacial reaction layers are composed of Ti(AlSi)3 intermetallic compounds (IMCs), but their morphologies at the different regions present obvious distinguishes. The microhardness of the reaction layers is as much as 141—190 HV. At welding joints side, the fusion zone appears the equixaed crystal structure, and the grain sizes are much smaller than those of welded metal, which is attributed to the effect of TiB2 particulates from the melted TiB2/7050 on acceleration formation and inhibiting growth for the new crystal nucleus. The tensile test results show that average tensile strength of the optimal welding-brazing joint is able to achieve 138 MPa. The failure of the tensile joint occurs by quasi-cleavage pattern, and the cracks initiate from the IMCs layer at the groove surface of TA2 and propagate into the welded metal.     

Mitigation of the blast load effects on a building structure using newly composite structural configurations

In this study, a nonlinear three-dimensional hydrocode numerical simulation was carried out using AUTODYN-3D to investigate the effect of blasting of a high explosive material (TNT) against several configurations of the composite structure. Several numerical models were carried out to study the effect of varying the thickness of the walls and the effect of adding an air layer or aluminum foam layer inside two layers of concrete in mitigating the effect of blast waves on the structure walls. The results showed that increasing the thickness of walls has a good effect on mitigating the effect of blast waves. When a layer of air was added, the effect of blast waves was exaggerated, while when a layer of aluminum foam was added the blast wave effects were mitigated with a reasonable percentage.     

复合材料层合结构的非线性传热分析

基于一阶热层合理论,考虑材料非线性的影响,建立了复合材料层合结构非线性传热分析的热层合理论及其有限元方程.通过数值算例研究了材料非线性对反对称复合材料层合板瞬态温度场的影响.     

高含钛量碳化硅纤维的研制

本文采用一种聚钛硅氧烷与聚碳硅烷反应,制得了Ti/Si摩尔比为0.10的聚钛碳硅烷。该聚合物具有良好的成丝性与稳定性,经熔融纺丝,再经不熔化处理后,在氮气气氛保护下1300℃热处理后制得了高含钛量的碳化硅纤维。文中对聚钛硅氧烷的合成与结构,它与聚碳硅烷的反应过程及聚钛碳硅烷的热分解特性进行了分析与研究。     

微型计算机在复合材料强度准则研究中的应用

文中论述了运用微型计算机(IBM-PC)进行复合材料强度准则研究的方法,包括强度包络线绘制、双向加载数据采集及实验数据处理等,同时还研究了如何确定双向试验中的破坏载荷值,并在分析实例中提供了较详细的数据。     

抗超高速撞击多层结构复合材料研究

本文介绍了抗超高速撞击多层结构复合材料的设计、制备和实验,并对结果进行了讨论,实验证明,以SiC陶瓷基复合材料为防护层、以空心微珠或多孔变密度复合材料为缓冲层、以编织物复合材料为结构层的多层结构复合材料,具有面密度低、抗撞击速度范围宽、抗撞击性能好的特点。