Parallel machine scheduling with eligibility constraints: A composite dispatching rule to minimize total weighted tardiness

We study a parallel machine scheduling problem, where a job j can only be processed on a specific subset of machines M_j, and the M_j subsets of the n jobs are nested. We develop a two‐phase heuristic for minimizing the total weighted tardiness subject to the machine eligibility constraints. In the first phase, we compute the factors and statistics that characterize a problem instance. In the second phase, we propose a new composite dispatching rule, the Apparent Tardiness Cost with Flexibility considerations (ATCF) rule, which is governed by several scaling parameters of which the values are determined by the factors obtained in the first phase. The ATCF rule is a generalization of the well‐known ATC rule which is very widely used in practice. We further discuss how to improve the dispatching rule using some simple but powerful properties without requiring additional computation time, and the improvement is quite satisfactory. We apply the Sequential Uniform Design Method to design our experiments and conduct an extensive computational study, and we perform tests on the performance of the ATCF rule using a real data set from a large hospital in China. We further compare its performance with that of the classical ATC rule. We also compare the schedules improved by the ATCF rule with what we believe are Near Optimal schedules generated by a general search procedure. The computational results show that especially with a low due date tightness, the ATCF rule performs significantly better than the well‐known ATC rule generating much improved schedules that are close to the Near Optimal schedules. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 249–267, 2017     

TiO_2/ACF复合光催化材料的制备及性能

用适宜载体将粉体材料固定是提高光催化材料稳定性的关键。采用溶胶-凝胶法,以钛酸丁酯为原料,选取活性炭纤维(ACF)为载体,制备了TiO2/ACF复合光催化材料。利用X射线衍射仪(XRD)、热分析仪(DSC-TG)和扫描电子显微镜(SEM)等测试技术对复合光催化材料的结构进行了表征分析。在紫外光照射下,通过对甲醛气体的光催化降解,考察了煅烧温度、煅烧时间、负载次数和负载时间等不同制备条件对复合光催化材料结构和性能的影响,结果表明:当煅烧温度为400℃,煅烧时间为2h,负载3次,负载时间为6min制备的TiO2/ACF光催化性能最佳。     

新型PBL键外包钢-混凝土组合梁抗弯承载力简化计算

基于理论分析,建立了新型PBL键外包钢-混凝土组合梁抗弯承载力计算的基本假定和计算模型,推导出组合梁抗弯承载力的简化计算公式,并采用有限元分析软件ANSYS14.5对组合梁进行了非线性有限元分析.对比分析表明:新型PBL键外包钢混凝土组合梁抗弯承载力的试验值、简化计算值和模拟分析值吻合较好.     

R-C系统中由表面散射引起的视场内杂散光分布

推导了R-C系统焦平面上由主镜和次镜表面散射引起的视场内杂散光分布的近似解析表达式.针对典型R-C系统的视场内杂散光分布,由近似表达式得到的计算结果与利用商业光学仿真软件得到的模拟结果具有较好的一致性,说明了近似表达式的正确性.与焦平面上无像差衍射光分布相比较,可以方便地分析强光入射时R-C系统焦平面上不同区域的饱和机制.研究结果表明,对于典型的R-C系统,探测器表面上以几何像点为中心,半径为2.5mm的范围内,衍射光是引起探测器饱和的主要因素;在此范围外,表面散射造成探测器的饱和.该结果为进一步研究强光饱和实验,解释有关现象提供理论分析基础.     

复合陶瓷含片状夹杂共晶体的理论断裂强度

应用四相模型法研究含片状夹杂复合共晶体的细观应力场．在基体、界面相和片状夹杂为各向同性的条件下,得到细观应力分布规律,并表现出明显的尺度效应．应用位错塞积理论研究片状夹杂内的位错运动,通过两相界面处位错塞积产生的应力集中确定其在基体内产生的最大张应力,导致基体首先被破坏失效,当基体内最大张应力等于分子理论的断裂强度时,得到共晶体断裂强度的理论表达式．结果表明：含片状夹杂共晶复合陶瓷强度随夹杂厚度增加而减小．     

陶瓷基复合装甲防12.7mm穿甲燃烧弹的靶试研究（Ⅰ）

基于对材料特性和防弹机理的认识,设计了由Al2O3陶瓷、616装甲钢和高强PE材料构成的陶瓷基复合装甲板,并用现役127.mm穿甲燃烧弹进行靶试考核,检验靶板设计思路,结果表明：防护面密度为128 kg/m2的靶板可防住该弹。     

Fabrication of AA7005/TiB2-B4C surface composite by friction stir processing: Evaluation of ballistic behaviour

The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB₂ and B₄C ceramic reinforcement particles. Surface composites with different weight fractions of TiB₂ and B₄C particles were processed by friction stir processing. Micro-hardness and depth of penetration tests were carried out to evaluate the ballistic properties of the surface composites. The surface hardness of the composite was found to be nearly 70 HV higher than base alloy. The depth of penetration of the steel projectile was 20–26 mm in the composites as compared to 37 mm in the base alloy. Ballistic mass efficiency factor of the surface composite was found to be 1.6 times higher than base alloy. This is mainly attributed to the dispersion strengthening from the reinforcement particles.     

坦克装甲车辆火控技术的现状及发展

对坦克火控系统的技术现状和发展前景进行了较为详尽的论述,并指出了当前国内火控发展中面临的主要技术难题及解决办法.     

切向空气气流对激光辐照碳纤维复合材料的影响

实验研究了靶材表面存在和不存在切向空气气流时,975nm连续激光对碳纤维增强树脂基复合材料的辐照效应,发现切向气流的加载有利于激光对碳纤维复合材料的破坏.从理论上对激光辐照下碳纤维复合材料的破坏机理进行了初步分析,基于碳的氧化特性和氧化反应机理,推导了碳纤维的氧化速率方程.采用改进的光滑粒子方法,对激光辐照下复合材料树...     

复合推进剂中硝酸铵的改性研究

在分析硝酸铵的多晶现象和吸湿特性的基础上 ,探讨了硝酸铵的改性技术。采用热分析法研究了无机添加剂对硝酸铵晶型转变的影响 ,并用高分子表面处理剂对硝酸铵进行表面处理。结果表明 ,这种方法可以有效地改善硝酸铵的晶体结构和吸湿特性 ,为硝酸铵在复合推进剂中的应用提供了实验和理论依据。