Technical note: Some structural results on acyclic supply chains

We consider acyclic supply chains under the full backorder assumption and reveal several simple yet unique properties. Most interestingly, we identify conditions for the best dedicated stocking policy to outperform the best shared stocking policy, and for an acyclic supply chain to be decomposable into a simpler network (e.g., tree). We specify ways to decompose them. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

信号稀疏分解理论在轴承故障检测中的应用

将信号稀疏分解理论引入到轴承故障检测问题中,提出新的轴承故障检测方法。通过字典学习的方式可有效实现轴承正常状态振动信号稀疏表示的超完备字典。利用该字典只适用于轴承正常状态信号稀疏分解的特点,将待分析信号在该字典上展开,通过比较信号稀疏表示误差与所设定阈值的关系来判断轴承对应的状态,从而实现轴承的故障检测。实验结果表明:当误差阈值设置合理时,该方法可有效地判断出轴承是否发生故障。     

某单兵无人车载系统电子稳像多分辨率塔式算法

在原有电子稳像算法基础上引入塔式分解,探索满足某单兵无人车载系统中稳像需求的算法,提出电子稳像多分辨率塔式算法.重点介绍了高斯塔和小波塔的构建方法,给出了塔式分解实验结果,并与未进行塔式分解稳像过程进行比较,从而得出此算法大大节省运算时间,提高了系统稳像的实时性,在特定应用环境中具有重要现实意义.     

Optimal empty vehicle redistribution for hub‐and‐spoke transportation systems

This article considers the empty vehicle redistribution problem in a hub‐and‐spoke transportation system, with random demands and stochastic transportation times. An event‐driven model is formulated, which yields the implicit optimal control policy. Based on the analytical results for two‐depot systems, a dynamic decomposition procedure is presented which produces a near‐optimal policy with linear computational complexity in terms of the number of spokes. The resulting policy has the same asymptotic behavior as that of the optimal policy. It is found that the threshold‐type control policy is not usually optimal in such systems. The results are illustrated through small‐scale numerical examples. Through simulation the robustness of the dynamic decomposition policy is tested using a variety of scenarios: more spokes, more vehicles, different combinations of distribution types for the empty vehicle travel times and loaded vehicle arrivals. This shows that the dynamic decomposition policy is significantly better than a heuristics policy in all scenarios and appears to be robust to the assumptions of the distribution types. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

基于高斯白噪声加入的EMD在旋转机械故障诊断中的应用研究

为了避免经验模式分解(EMD)过程中不同时间尺度函数间的模式混叠,采用基于高斯白噪声加入的经验模式分解方法,并将之应用于旋转机械故障诊断中。该方法主要是对同一信号重复若干次加入相互独立的高斯白噪声序列,并分别筛选固有模式函数,而后把各个对应的固有模式函数进行平均计算,消除白噪声对分解结果的影响。最后,通过对固有模式函数进行包络解调,从中提取故障特征。对实际旋转机械故障振动信号的分析结果表明,该方法能有效避免固有模式函数间模式混叠,提高故障诊断效果。     

采用张量方法的盲干扰抑制及信源恢复技术

针对多输入多输出系统受到有意干扰情况下的盲干扰抑制和信源恢复问题，提出一种双阵列天线接收机结构，通过差分处理，在不考虑独立性的条件下实现盲干扰抑制。消除干扰后的数据有明显的张量切片特征，将其堆积成三阶张量，并通过基于张量分解的方法不经信道估计直接恢复源信号，相较于传统基于信道估计的信源恢复方法大大降低信道估计误差的影响，提高恢复精度。仿真结果表明，所提方法较传统基于训练序列进行信道估计的方法能以更小的训练开销达到更优的信号恢复性能。     

网络异构信息的张量分解聚类方法

提出基于张量分解的聚类算法,能够同时处理网络中多类型、多语义关系的异构信息。网络信息体系中的各种异构信息被建模为一个多维张量,异构信息之间丰富的语义关系建模为张量中的元素。提出有效的张量分解方法,将不同类型的信息对象一次性划分到不同的簇中。在人工合成的数据集和真实数据集上的实验结果表明:该聚类方法可以很好地处理网络信息体系中的异构信息聚类问题,并且性能优于现有的聚类方法。     

一种新的基于特征值分解的双站无源定位算法

在自卫式噪声干扰的条件下,地面制导雷达将无法得到目标的斜距信息,无法实现对目标的定位,此时只有采用雷达组网方式,利用2个或多个雷达站的测角信息来对空间目标进行定位。提出一种基于特征值分解的新的定位跟踪算法,该算法具有计算简单、清晰,运算量小的优点,仿真也表明该算法有较好的精度。     

The effect of al particle size on thermal decomposition,mechanical strength and sensitivity of Al/ZrH2/PTFE composite

To study the thermal decomposition of Al/ZrH2/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates, molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size. The active decomposition temperature of ZrH2 was obtained by TG-DSC, and the quasi-static me-chanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respec-tively by quasi-static compression and drop-hammer test. The results show that the yield strength of the material decreased with the increase of the Al particle size, while the compressive strength, failure strain and toughness increased first and then decreased, which reached the maximum values of 116.61 MPa, 191％, and 119.9 MJ/m respectively when the Al particle size is 12—14μm because of particle size grading. The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed. Those with developmental cracks formed inside did not react. It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat. Then ZrH2 was activated and decomposed, and participated in subsequent reaction to generate ZrC. The impact sensitivity of the specimens decreased with the increase of Al particle size.     

一种基于Q-R矩阵分解的自适应滤波算法

由于计算误差等因素的影响,致使滤波协方差阵不对称或负定,从而导致滤波器发散,影响滤波算法的收敛速度和稳定性。在机动加速度"当前"统计自适应卡尔曼滤波算法的基础上,引入了基于Q-R矩阵分解的自适应卡尔曼滤波算法。将协方差阵分解为两个矩阵的乘积,来保证协方差矩阵的正定性。仿真结果表明,该算法可以较好地跟踪机动目标,具有精度高、稳定好、收敛快等特点。