远程导弹飞行管道碎片数目统计方法研究

摘 要：针对空间碎片数及分布,根据远程导弹飞行散布统计规律,提出一种统计导弹飞行管道内碎片数目的方法,即利用空间碎片模型数据,求出部分区域碎片数目密度随高度变化关系,构造导弹空间飞行管道,将数目密度函数在导弹飞行管道内积分,从而得到管道内碎片数目的期望值,量化评估了导弹与空间碎片的碰撞风险。仿真结果表明,远程导弹与空间碎片的撞击风险数量级为10-7,而飞行管道内碎片数目数量级为10-2,表明空间碎片已威胁到远程导弹的安全飞行。     

Storage life prediction under pre-strained thermally-accelerated aging of HTPB coating using the change of crosslinking density

In order to predict the storage life of a certain type of HTPB (hydroyl-terminated polybutadiene) coating at 25 C and analyze the influence of pre-strain on the storage life, the accelerated aging tests of HTPB coating at 40 C, 50 C, 60 C, 70 C with the pre-strain of 0%, 3%, 6%, 9%, respectively were carried out. The variation regularity of the change of crosslinking density was analyzed and the aging model of HTPB coating under pre-strained thermally-accelerated aging was proposed. The storage life of HTPB coating at 25 C was estimated by using the Berthelot equation as the end point of the aging life with a 30% decrease in maximum elongation. The results showed that the change of crosslinking density of HTPB coating increased with the increase of aging temperature and aging time, and decreased with the in-crease of pre-strain. Under 0% pre-strain, the relationship between the change of crosslinking density of HTPB coating and the aging time can be described by the logarithmic model with the confidence probability greater than 99%.The stress relaxation phenomenon existed under 3%, 6% and 9% pre-strained aging. The aging model considering chemical aging and pre-strain was established with the confidence probability greater than 90%. The storage life of HTPB coating was 15.2935 years at 25 C under 0% pre-strain, which was reduced by 13.9007%, 75.6949% and 89.7859% under 3%, 6% and 9% pre-strain, respectively. The existence of pre-strain has a serious impact on the storage life of HTPB coating, therefore, the pre-strain should be avoided as much as possible during the actual storage.     

陶瓷/金属梯度热障涂层的制备及性能评价

为了评价陶瓷/金属梯度热障涂层的性能,设计了4种涂层方案和2种基体材料(1Cr18Ni9Ti和2Cr13).利用单枪单送粉器成功地制备了线性梯度涂层.通过观察涂层的微观结构、测量涂层的抗热震性能和热残余应力来评价涂层的性能.利用扫描电镜对各种陶瓷涂层的微观结构进行了观察和分析,利用X射线能谱分析得到了陶瓷梯度涂层试样中的不同区域的衍射图.热震试验表明,梯度涂层比非梯度涂层具有更好的抗热震性能.采用钻孔法对不同涂层方案进行了残余应力的测量,结果表明,压应力出现在1Cr18Ni9Ti基体材料上,而拉应力出现在2Cr13基体材料上.     

一种用于GAF协议的优化邻居表算法

GAF协议是一种基于地理信息的无线传感器网络路由协议,由于采用多跳传输,将导致热区的产生。提出了一种优化邻居表算法,可以有效辨识GAF虚拟网格内的节点密度,从而选择密度大的网格通行,以均衡热区能耗,延长网络寿命。仿真结果验证了该算法的可行性。     

电磁轨道炮电感梯度影响因素分析

利用Ansoft Maxwell 14.0有限元分析软件,在考虑和不考虑电枢2种情况下对简单电磁轨道炮电感梯度的影响作对比分析,得出计算电感梯度时有必要将电枢的影响考虑进去的结论.为提高增强型轨道炮的电感梯度,分析不同轨道间距、厚度以及不同炮口宽度对2种增强型轨道炮电感梯度的影响,得出电感梯度随轨道参数变化的规律.     

基于随机拟合的悬浮式深弹弹阵特征建模＊

通过分析悬浮式深弹发射后在空中的弹道特性,建立了深弹弹着点坐标的计算模型。采取蒙特卡洛方法,分别对舰艇六自由度状态下,单管和六联装火箭深弹的弹着点坐标进行了仿真计算,对弹着点的分布规律进行了研究,并得出弹着点的联合密度函数。结果表明,在发射参数存在正态扰动时,弹着点散布区域均呈椭圆形分布,弹着点坐标均仍服从正态分布。     

Deconsolidation and combustion performance of thermally consolidated propellants deterred by multi-layers coating

Both heating and solvent-spray methods are used to consolidate the standard grains of double-base oblate sphere propellants plasticized with triethyleneglycol dinitrate (TEGDN) (TEGDN propellants) to high density propellants. The obtained consolidated propellants are deterred and coated with the slow burning multi-layer coating. The maximum compaction density of deterred and coated consolidated propellants can reach up to 1.39 g/cm³. Their mechanic, deconsolidation and combustion performances are tested by the materials test machine, interrupted burning set-up and closed vessel, respectively. The static compression strength of consolidated propellants deterred by multi-layer coating increases significantly to 18 MPa, indicating that they can be applied in most circumstances of charge service. And the samples are easy to deconsolidate in the interrupted burning test. Furthermore, the closed bomb burning curves of the samples indicate a two-stage combustion phenomenon under the condition of certain thickness of coated multi-layers. After the outer deterred multi-layer coating of consolidated samples is finished burning, the inner consolidated propellants continue to burn and breakup into aggregates and grains. The high burning progressivity can be carefully obtained by the smart control of deconsolidation process and duration of consolidated propellants. The preliminary results of consolidated propellants show that a rapid deconsolidation process at higher deconsolidation pressure is presented in the dynamic vivacity curves of closed bomb test. Higher density and higher macro progressivity of consolidated propellants can be obtained by the techniques in this paper.     

基于应变局部化理论的剑桥模型改进

应用传统的弹塑性理论模型在分析剪切带的时候遇到了很多困难,如控制方程失去椭圆性等,其原因是传统的弹塑性理论模型并没有包含材料的内部参数。在剑桥模型的基础上,考虑应变二阶梯度,提出一种新的计算剪切带的理论模型。当应变局部化发生时,带内土体采用该模型计算,带外土体则按照传统弹塑性模型计算。该理论模型汲取了剑桥模型实验参数少,应用简便的优点。     

Cross-linking density and aging constitutive model of HTPB coating under prestrain thermal accelerated aging

In order to study the cross-linking density and aging constitutive relationship of HTPB coating during storage, the thermal accelerated aging tests at 0%, 3%, 6% and 9% prestrains were carried out. The cross-linking density of HTPB coating at different aging stages were tested using low-field ¹H NMR and the variation of cross-linking density was analyzed. The aging model of cross-linking density considering the chemical aging and the physical stretching factors was established. The uniaxial tensile tests were carried out on HTPB coating at different aging stages and the cross-linking density was introduced into Ogden hyperelastic constitutive model as a characterization parameter of correction coefficient. Combined with uniaxial tensile test results, a prestrain aging constitutive model of HTPB coating was established. The results show that the cross-linking density of HTPB coating increases rapidly at first and then slowly with the increase of thermal accelerated aging time without prestrain. Under prestrain conditions, the cross-linking density of HTPB coating decreases at the early stage, and increases rapidly at first and then slowly at the middle and late stages of thermal accelerated aging. The correlation coefficients of aging model of cross-linking density and aging constitutive model with test results are R > 0.9500 and R > 0.9900 respectively, which can be used to accurately describe the cross-linking density and aging constitutive relationship of HTPB coating under prestrain accelerated thermal aging conditions.