Investigation on energy output structure of explosives near-ground explosion

In order to give the energy output structure of typical explosives near-ground explosion in real ground conditions, the free-field shockwave, ground reflection shockwave and Mach wave overpressure time history of composition B explosive, RDX explosive and aluminized explosive were measured by air pressure sensors and ground pressure sensors. The shape of the free-field shock wave, ground reflection shock wave, and Mach wave and explosion flame were captured by high-speed camera. The experimental results show that, at the same horizontal distance from the initiation point, the peak overpressure of explosive shock wave of composition B explosive, both in the air and on the ground, is less than that of RDX and aluminized explosives. At a distance of 3.0 m from the initiation point, the peak overpressure of aluminized explosives is slightly less than that of RDX explosives. Owing to the exothermic effect of aluminum powder, the pressure drop of aluminized explosives is slower than that of RDX explosives. At 5.0 m from the initiation point, the peak overpressure of aluminized explosives is larger than that of RDX explosives. At the same position from the initiation point, among the three kinds of explosives, the impulse of aluminized explosives is the maximum and the impulse of composition B explosives is the minimum. With the increase of the horizontal distance from the initiation point, the height of Mach triple-points (Mach steam) of the three explosives increases gradually. At the same horizontal distance from the initiation point, there is poorly difference in the height of Mach triple-points between aluminized explosive and RDX explosive, and the height of Mach triple-points of composition B explosive is much smaller than that of other two explosives. The maximum diameter and duration of the fireball formed by aluminized explosives are the largest, followed by composition B explosive, and the maximum diameter and duration of the fireball formed by RDX explosive are the smallest.     

基于GUI和矢量信号源的微波着陆信号模拟器设计

提出了基于GUI和矢量信号源的微波着陆信号模拟器设计方法。首先利用MATLAB图形用户界面开发环境设计了集信号参数设置、干扰模拟和基带数据生成于一体的基带波形仿真功能;其次提出了一种改进的扫描波束模拟方法,实现了对微波着陆扫描信号的精确模拟;最后利用矢量信号源MG3700A对基带数据进行混合调制。测试结果表明,该信号模拟器达到设计要求。     

水下近距爆炸作用下弹性钢板处的空化特性研究

弹性钢板在水下近距爆炸作用下,冲击波会使其附近流体形成局部空化,脉动气泡会使流体形成锥形空化。利用平面冲击波理论对局部空化的形成特性进行了研究,理论分析了结构目标尺度的变化对空化区域形成的影响,并通过具体试验对局部空化理论进行了验证,两者符合较好;通过试验和数值仿真方法研究了气泡脉动引起的锥形空化的形成特点,初步分析了锥形空化的形成原因。结果表明,锥形空化对结构具有较大的冲击作用。     

基于改进 Gerstner 波的岛礁近岸波浪实时仿真?

为了实现岛礁附近波浪实时仿真，结合 Gerstner 波和水波动力学知识，提出了一种能够模拟波浪卷曲和折射绕射现象的波浪建模与绘制方法。首先，建立 Gerstner 波参数随水深变化关系，构建模拟波浪卷曲过程的几何模型；然后，定义岛礁地形对波浪传播的阻障和遮挡系数，并据此修正波浪传播的波向和波高，实现折射和绕射现象的仿真；最后，应用着色器缓存技术完成计算的硬件加速，并构建了基于视点的波浪传播多分辨率绘制策略。实验结果表明，该方法对波浪的卷曲和折射绕射现象取得了较好的仿真效果，绘制效率能够满足实时性要求。     

地波雷达组网探测高空目标优化布站

针对高空无人机等目标，建立基于高频地波雷达为主的2D雷达探测网，以目标高度估计和协同补盲为约束条件，对2D雷达网的优化布站问题进行理论计算和实例仿真，实验结果证明布站方法的有效性。     

温度对半导体激光器退化的影响

采取等效电路模型仿真和加速退化试验相结合的方法研究温度对半导体激光器不同退化模式的影响规律。针对半导体激光器有源区退化和腔面退化进行分析,发现有源区退化会使半导体激光器阈值电流增大,而腔面退化会使半导体激光器斜率效率减小;进行了半导体激光器热特性建模与仿真,发现温度升高会使半导体激光器阈值电流增大;利用半导体激光器加速退化试验平台进行了半导体激光器加速退化试验。仿真与试验结果证明:温度升高会加剧半导体激光器腔面退化,而对有源区退化无显著影响。上述结论对进一步完善半导体激光器温度-退化仿真模型,研究温度对半导体激光器退化的作用机理和防护措施有积极作用。     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

操纵手考核成果的操纵手模型参数辨识

以半自动跟踪的人机系统为研究对象,从工程实际中提取了描述操纵手操控水平的指标集:静态灵敏度、平均超差度及平均超差频率指标,并依据这些指标的考核结果,构建了一种操纵手数学模型的辨识方法.最后由靶场试验数据辨识了相应的模型参数,从而验证了该方法的可行性.     

舰船主动力装置故障隔离与参数估计方法

针对舰船主动力装置结构复杂、故障种类多和系统不确定性等故障诊断问题，提出采用基于双因果键合图模型的定量故障隔离与参数估计方法。根据系统传感器配置方案，建立双因果键合图模型，通过因果路径分析，推导得到系统解析冗余关系，并获得故障特征矩阵。建立系统线性分式变换键合图模型，开展故障仿真，将其与双因果键合图模型耦合，在MATLAB/Simulink环境中进行仿真试验，实现了舰船主动力装置的故障隔离与参数估计。结果表明：对双因果键合图模型因果路径分析，可以避免手动推导系统解析冗余关系的繁杂过程；基于其部件构造方程的分析可以有效实现系统故障隔离与参数估计，实时跟踪和预测故障状态。     

基于部分可辨识振动系统的载荷恢复方法

在复模态分析和参数辨识的基础上,对部分可辨识振动系统的载荷识别问题进行了研究,提出了基于部分可辨识复模态参数的载荷恢复方法。恢复模型存在幅值模糊和相位模糊,不存在排列模糊。数值仿真验证了该方法的有效性,并讨论了提高恢复精度的方法。