北京谱仪(BES) 轻子识别研究——Monte Carlo结果

这项工作是详细研究北京谱仪(BES)轻子识别的一部分。本文报告了π/μ、π/e分辨的Monte Carlo 结果。结果表明:在北京谱仪中π/μ分辨有两个有效的截断,即位置与方向。对于π/μ分辨也有两个有效的截断,即总电荷量沉积和二极矩。     

横向扰动对超声速混合层被动标量混合影响分析

采用大涡模拟数值计算二维空间发展的超声速混合层,重点分析横向扰动对混合层的标量结构、标量厚度以及标量体积卷吸率的影响。采用理论模型验证了数值方法在计算标量混合特性方面的准确性。结果表明,横向扰动频率和振幅明显影响着混合层的标量增长率和卷吸率。高频扰动增大了混合层近场标量增长率和卷吸率,但是低频扰动改善了混合层远场标量增长率。大尺度涡卷吸过程对混合层标量卷吸率起决定作用。多频扰动有效地增强了超声速混合层的标量混合。     

函数变换提高灰色预测模型精度的条件

指出选择函数变换来提高模型精度主要与三个方面的因素有关：提高数据序列的光滑比、调整数据序列的级比和确保凸凹性。在调整级比方面，扩充了级比压缩变换的相关定理，并讨论了几种常用的函数变换在上述三个方面的关系。最后结合实例提出，对于变换后的数据序列若不满足这三方面的要求可以再进行函数变换以达到提高模型精度的目的。     

Driving force coordinated control of an 8 ×8 in-wheel motor drive vehicle with tire-road friction coefficient identification

Because of the complexities of tire-road interaction,the wheels of a multi-wheel distributed electric drive vehicle can easily slip under certain working conditions.As wheel slip affects the dynamic per-formance and stability of the vehicle,it is crucial to control it and coordinate the driving force.With this aim,this paper presents a driving force coordination control strategy with road identification for eight-wheeled electric vehicles equipped with an in-wheel motor for each wheel.In the proposed control strategy,the road identification module estimates tire-road forces using an unscented Kalman filter al-gorithm and recognizes the road adhesion coefficient by employing the recursive least-square method.According to road identification,the optimal slip ratio under the current driving condition is obtained,and a controller based on sliding mode control with a conditional integrator uses this value for accel-eration slip regulation.The anti-slip controller obtains the adjusting torque,which is integrated with the driver-command-based feedforward control torque to implement driving force coordination control.The results of hardware-in-loop simulation show that this control strategy can accurately estimate tire-road forces as well as the friction coefficient,and thus,can effectively fulfill the purpose of driving force coordinated control under different driving conditions.     

Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds

The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention. The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency. The major influencing ATIG welding parameters, such as electrode gap, travel speed, current and voltage, that aid in controlling the aspect ratio of DSS joints, must be optimized to obtain desirable aspect ratio for DSS joints. Hence in this study, the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array (OA) experimental design and other statistical tools such as Analysis of Variance (ANOVA) and Pooled ANOVA techniques. The optimum process parameters are found to be 1 mm electrode gap, 130 mm/min travel speed, 140 A current and 12 V voltage. The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.     

一种鱼雷自导信号频率检测方法研究

靶场在进行智能鱼雷鉴定试验任务时,实时准确地检测出鱼雷自导信号的频率成分是靶标信号处理中的重要环节,谱线比值法便是靶标进行信号处理时检测信号频率的一种有效方法。本文介绍了谱线比值法的基本原理,针对目前鱼雷自导信号特点,对该方法提出了改进方案并进行了仿真。仿真结果表明,经改进的谱线比值法能够满足靶标检测复杂鱼雷自导信号体制下信号频率的使用要求。     

数值模拟气/气喷嘴速度比对燃烧性能的影响

为研究应用于全流量补燃循环发动机的不同气/气喷嘴得到的燃烧流场,通过求解NavierStokes方程组,对不同燃料与氧化剂速度比下的流动燃烧过程进行了数值计算,计算结果与实验结果吻合。仿真结果表明:增加速度比能使燃烧火焰面提前,燃烧效率变大。如果发动机的长度受到限制,可以适当增加速度比以实现高效燃烧。     

阶比谱分析与汽车起动电机故障的实时诊断

本文主要论述阶比谱分析方法及其在汽车起动电机故障实时诊断中的应用。首先阐述了阶比谱分析的原理以及阶比采样中混迭与泄漏的产生及其抑制方法,然后讨论了如何在起动电机运行过程短、升速快的情况下获取感兴趣的噪声信号,进而采用阶比谱分析方法从信号中提取故障特征信息,最后利用阀值判别法起动电机的故障进行实时诊断。     

有源诱饵的极化鉴别研究

针对全极化测量体制雷达,研究了有源诱饵等欺骗性电子干扰的鉴别问题。首先详细分析了干扰机天线为圆极化和线极化两种典型情况下有源诱饵的极化特性,探讨了雷达目标的极化散射特性;而后提出了能够有效表征有源诱饵和雷达目标极化特性之间差异的参量———共交极化比及其峰值、聚类中心等概念和定义,并设计了有源诱饵的极化鉴别算法;最后,结合实测数据,计算机仿真实验表明鉴别算法的可行性和有效性。     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.