线性调频连续波雷达低空小目标长时间相参积累方法

针对小型无人机目标雷达回波弱、目标检测难的问题,研究了在线性调频连续波(linear frequency modulation continuous wave, LFMCW)体制雷达下的长时间相参积累方法。通过推导LFMCW雷达回波表达式,提出了基于时域差频信号线性调频-Z变换的拉东-傅里叶变换实现方法。评估了该方法的运算量,并与频域实现的方法进行对比。经过仿真和实测数据验证了本文算法对LFMCW雷达下的弱目标相参积累的有效性。     

A quasi-isentropic model of a cylinder driven by aluminized explosives based on characteristic line analysis

A quasi-isentropic study on the process of driving a cylinder with aluminized explosives was carried out to examine the influence of the aluminum (Al) reaction rate on cylinder expansion and the physical parameters of the detonation products. Based on the proposed quasi-isentropic hypothesis and relevant isentropic theories, the characteristic lines of aluminized explosives driving a cylinder were analyzed, and a quasi-isentropic model was established. This model includes the variation of the cylinder wall velocity and the physical parameters of the detonation products with the Al reaction degree. Using previously reported experimental results, the quasi-isentropic model was verified to be applicative and accurate. This model was used to calculate the physical parameters for cylinder experiments with aluminized cyclotrimethylenetrinitramine explosives with 15.0 % and 30.0 % Al content. The results show that this quasi-isentropic model can be used not only to calculate the cylinder expansion rule or Al reaction degree, but also to calculate the physical parameters of the detonation products in the process of cylinder expansion. For explosives with 15.0 % and 30.0 % Al, 24.3 % and 18.5 % of the Al was found to have reacted at 33.9 μs and 34.0 μs, respectively. The difference in Al content results in different reaction intensity, occurrence time, and duration of two forms of reaction (diffusion and kinetic) between the Al powder and the detonation products; the post-detonation burning reaction between the Al powder and the detonation products prolongs the positive pressure action time, resulting in a continuous rise in temperature after detonation.     

推进国防动员军民融合深度发展的对策思考

军民融合式发展是实现富国与强军相统一的必由之路,也是增强国防动员潜力、提高国防动员能力的有效途径。在新的形势下推进国防动员建设,必须进一步强化军民融合观念,完善军民融合机制,提高军民融合层次,增强军民融合实效,努力促进动员潜力随经济实力同步增长、动员能力随需求拓展不断提升,实现经济效益、社会效益与国防效益有机统一。     

科学管理、精益管理与精确作战工程保障研究

设计是作战行动筹划的重要步骤,精确工程保障需要对工程保障行动进行精密的设计和精确管理与控制。科学管理采用科学实验的方法,通过劳动方法标准化和差别计件工资制度,有效提高了工作效率,其基本原理经过百余年的实际检验,被证明是一个成熟有效的管理方法。借鉴科学管理理论,需要对工程保障行动进行动作研究,进而研究工程保障行动的作业标准,以期提高其保障效率。精益管理是在科学管理在新的历史时期的发展与改进,它使用了准时制、零库存、均衡生产、持续改进等先进的管理理念和六西格玛管理、成组技术等先进技术,为基于信息系统体系作战的工程保障能力生成提供了有益的借鉴,可加深我们对精确工程保障的理解,促进精确工程保障研究的可操作性。     

外军反舰导弹装备使用现状及发展趋势研究

反舰导弹作为海上舰船＂杀手＂,其发展一直倍受各国海军关注。文章对反舰导弹的发展历程进行了回顾,对目前外军已经装备和正在研发的典型反舰导弹进行了分析和研究。以此为基础,对未来反舰导弹的发展趋势进行了探讨和展望,提出未来新型反舰导弹将趋于超远程化、超高速化、超隐身化、网络化和智能化。     

天然气在土壤中泄漏的稳态温度场分析

埋地高压天然气经小孔泄漏会导致土壤冻结形成冻土,应用一元气体动力学、流体力学和传热学知识建立了天然气小孔泄漏吸热率模型和土壤稳态温度场模型,并进行了实例计算。结果表明：当天然气输送压力小于临界压力,小孔泄漏吸热率随压力的增大而增大;当天然气输送压力大于等于临界压力,小孔泄漏吸热率达到最大值;冻土厚度随土壤热导率或空气对流传热系数的增大而减小,但土壤热导率对其影响较小,空气对流传热系数对其影响较大。     

新型陆军部队作战能力综合实验支持系统设计

利用综合实验方法对新型陆军部队作战能力进行分析评估是新型陆军部队建设发展的客观需要,其综合实验的成功运用必须得到相应系统的支持。针对支持系统所需具备的功能,设计支持系统的总体结构及主要功能模块,详细分析各功能模块间的信息流程和支持系统的应用过程,为支持系统的具体构建提供指导。     

Research on design and firing performance of Si-based detonator

For the chip integration of MEMS (micro-electromechanical system) safety and arming device, a miniature detonator needs to be developed to reduce the weight and volume of explosive train. A Si-based micro-detonator is designed and fabricated, which meets the requirement of MEMS safety and arming device. The firing sensitivity of micro-detonator is tested according to GJB/z377A-94 sensitivity test methods: Langlie. The function time of micro-detonator is measured using wire probe and photoelectric transducer. The result shows the average firing voltage is 6.4 V when the discharge capacitance of firing electro-circuit is 33 μF. And the average function time is 5.48 μs. The firing energy actually utilized by Si-based micro-detonator is explored.     

Influence of Al2O3 particles on the microstructure and mechanical properties of copper surface composites fabricated by friction stir processing

The influence of three factors, such as volume percentage of reinforcement particles (i.e. Al₂O₃), tool tilt angle and concave angle of shoulder, on the mechanical properties of Cu–Al₂O₃ surface composites fabricated via friction stir processing was studied. Taguchi method was used to optimize these factors for maximizing the mechanical properties of surface composites. The fabricated surface composites were examined by optical microscope for dispersion of reinforcement particles. It was found that Al₂O₃ particles are uniformly dispersed in the stir zone. The tensile properties of the surface composites increased with the increase in the volume percentage of the Al₂O₃ reinforcement particles. This is due to the addition of the reinforcement particles which increases the temperature of recrystallization by pinning the grain boundaries of the copper matrix and blocking the movement of the dislocations. The observed mechanical properties are correlated with microstructure and fracture features.     

反潜机采用阿基米德螺旋线搜潜问题研究

反潜机是重要的反潜力量,根据反潜机搜潜情况,建立了反潜飞机采用阿基米德螺旋线样式搜潜的数学模型和目标运动模型,讨论了螺旋线采用的三种轨迹间隔,通过仿真验证,确立了反潜机搜潜最优轨迹间隔,以达到提高发现目标潜艇概率、优化反潜效能的目的,为反潜飞机采用阿基米德巡逻线搜潜样式搜潜时提供战术参考。