超空泡航行体刚柔耦合动力响应有限元分析

考虑航行体大范围转动,根据哈密顿原理推导了超空泡航行体在一次近似模型变形下的刚柔耦合动力响应方程,定性分析了其与零次近似模型下方程的区别,并对方程进行了定量计算。结果表明:一次近似模型相比零次近似模型下的横向振动方程,刚度矩阵项增大;所推导方程能够用于定量分析和直观描述超空泡航行体刚柔耦合下的变形。     

发射井内弹-筒系统抗爆减震设计

为提高井下冷发射导弹的生存能力,对其开展了抗爆减震设计研究,建立了弹-筒系统在不同减震方式下的有限元仿真模型,计算了弹-筒系统在爆炸地冲击作用下的动态响应,比较了悬吊式、下支承式、斜吊式等多种减震系统的减震效果,并分析了减震器刚度和阻尼对减震效果的影响。结果表明：悬吊式减震系统的减震效果略好于下支承式,斜吊式最差,合理减小减震器刚度和阻尼可以明显提升悬吊式减震系统的减震效果。     

基于ANSYS的预应力CFRP布加固混凝土梁有限元分析

采用ANSYS有限元分析软件,对卸载或不卸载时预应力碳纤维(CFRP)布加固梁进行仿真分析,并在有限元分析中提出了施加预应力的方法(升温法),以及利用单元的生与死实现不卸载时加固的方法。通过实例对比分析表明,基于ANSYS的有限元分析结果与试验分析结果吻合较好,可在一定程度上有效替代试验分析方法,从而减少试验所需的时间和费用,对后续的CFRP布加固混凝土结构的研究工作具有一定的参考价值。     

基于FLAMES和HLA的导弹分队作战仿真系统

研究了基于FLAMES和HLA导弹分队作战仿真。首先介绍了系统架构及工作流程,然后剖析了基于FLAMES和HLA进行导弹分队作战中的仿真实体之间的信息交互机制,最后探讨了基于FLAMES和HLA的开发过程,验证了基于FLAMES和HLA开发的导弹分队作战仿真的实用性,为以后分队作战智能化仿真研究提供借鉴。     

轴向应力波作用下的圆柱壳弹塑性后屈曲

为揭示柱壳屈曲变形的发展机理及屈曲波与弹塑性应力波耦合传播间的关系,运用非线性显示动力学有限元分析方法对承受轴向高速冲击载荷作用下柱壳的弹塑性后屈曲过程进行了研究。分析结果表明:对于柱壳在轴向高速冲击下的弹塑性轴对称动力屈曲,主要屈曲变形发生在柱壳的两端,屈曲变形的产生及发展与应力波在壳中的传播过程密切相关;塑性应力波在整个屈曲过程中起了绝对支配的作用;屈曲波的产生及发展,都与塑性波的传播及反射有关;弹性应力波由于在整个屈曲过程中持续的时间极短,处于次要的地位。     

Optimization of buckling load for laminated composite plates using adaptive Kriging-improved PSO: A novel hybrid intelligent method

An effective hybrid optimization method is proposed by integrating an adaptive Kriging (A-Kriging) into an improved partial swarm optimization algorithm (IPSO) to give a so-called A-Kriging-IPSO for maxi-mizing the buckling load of laminated composite plates (LCPs) under uniaxial and biaxial compressions. In this method, a novel iterative adaptive Kriging model, which is structured using two training sample sets as active and adaptive points, is utilized to directly predict the buckling load of the LCPs and to improve the efficiency of the optimization process. The active points are selected from the initial data set while the adaptive points are generated using the radial random-based convex samples. The cell-based smoothed discrete shear gap method (CS-DSG3) is employed to analyze the buckling behavior of the LCPs to provide the response of adaptive and input data sets. The buckling load of the LCPs is maximized by utilizing the IPSO algorithm. To demonstrate the efficiency and accuracy of the proposed methodology, the LCPs with different layers (2, 3, 4, and 10 layers), boundary conditions, aspect ratios and load patterns (biaxial and uniaxial loads) are investigated. The results obtained by proposed method are in good agreement with the literature results, but with less computational burden. By applying adaptive radial Kriging model, the accurate optimal results-based predictions of the buckling load are obtained for the studied LCPs.     

Bionic stab-resistant body armor based on triangular pyramid structure

A stab-resistant substrate was designed and realized with a triangular pyramidal structure, inspired by the biological armor model in nature. The stab-resistance behavior and dynamic response mechanisms were studied through numerical simulation and experimental testing of a knife impacting a substrate, and an optimal structural design was obtained accordingly, with a tilted angle of 22.5° and optimal thickness of 1.2 mm. It was shown that the triangular pyramidal structure generated twice the internal energy of the knife than the flat substrate due to the dispersing effect of the structure. The force parallel to the inclination caused a significant scratch on the substrate surface, while the force perpendicular caused obvious substrate deformation. A new riveting method was used to form the total layer, which passed the GA 68—2008 standard. The stab-resistant clothing coupled with the reduced wearing burden could provide effective protection and avoid fatal injuries on security personnel working in dangerous environments. The method provided may enlighten the future design and manufacturing of stab-resistant clothing.     

Dynamic necking of a near α titanium alloy at high strain rates:Experiments and modelling

The tensile behaviour of near α Ti3Al2.5 V alloy, conceived for applications in aerospace and automotive engineering, is characterized from quasi-static to high strain rates. The material is found to present noticeable strain rate sensitivity. The dynamic true strain rate in the necking cross-section reaches values up to ten times higher than the nominal strain rate. It is also observed that beyond necking the dynamic true stress-strain curves present limited rate dependence. The experimental results at different strain rates are used to determine a suitable constitutive model for finite element simulations of the dynamic tensile tests. The model predicts the experimentally macroscopic force-time response, true stress-strain response and effective strain rate evolution with good agreement.     

板的弹塑性弯曲有限元分析中的分层法

论述了板的弹塑性弯曲有限元分析方法 ,对屈服函数的选取作了分析 ,采用分层方法 ,着重分析了对板的弹塑性切线刚度矩阵的建立 ,所论述的分层计算方法对其它非线性板弯曲的有限元计算具有一定的参考价值     

奇型非线性抛物问题的有限元误差估计

引入带权的Sobolev空间 ,讨论了奇型非线性抛物问题的有限元方法 ,在a(u) ,f(u)均满足Lips chitz条件下 ,证明了相应椭圆投影算子Rhu与u之间误差估计式 ,并在一定的假设下 ,给出了奇型非线性抛物问题的广义解u及半离散问题的有限元解uh 误差估计式 .