高灵敏度GPS软件接收机捕获算法

针对传统方法难以实现室内环境下GPS信号的捕获以及传统弱信号捕获算法的一系列弊端,介绍了一种新的捕获算法。由于数据段通过“先累加后相关”的方式进行相干积分可以减少运算量,以此方法改进的半位捕获法进行数据段选择可以避免导航数据位翻转,并且改进后的差分相干积分能够减小非相干积分造成的“平方损失”和改善信噪比,融合上述优点,提出了一种新的算法,为高灵敏度GPS软件接收机的实现提供了保证。仿真结果表明,此算法极大的提高了接收机的捕获性能,并且能够快速捕获到载噪比低至25dB/Hz的微弱信号。     

Cooperative interception with fast multiple model adaptive estimation

For the case that two pursuers intercept an evasive target, the cooperative strategies and state estimation methods taken by pursuers can seriously affect the guidance accuracy for the target, which performs a bang For the case that two pursuers intercept an evasive target, the cooperative strategies and state estimation methods taken by pursuers can seriously affect the guidance accuracy for the target, which performs a bang-bang evasive maneuver with a random switching time. Combined Fast multiple model adaptive estimation (Fast MMAE) algorithm, the cooperative guidance law takes detection configuration affecting the accuracy of interception into consideration. Introduced the detection error model related to the line-of-sight (LOS) separation angle of two interceptors, an optimal cooperative guidance law solving the optimization problem is designed to modulate the LOS separation angle to reduce the estimation error and improve the interception performance. Due to the uncertainty of the target bang-bang maneuver switching time and the effective fitting of its multi-modal motion, Fast MMAE is introduced to identify its maneuver switching time and estimate the acceleration of the target to track and intercept the target accurately. The designed cooperative optimal guidance law with Fast MMAE has better estimation ability and interception performance than the traditional guidance law and estimation method via Monte Carlo simulation.     

Supplier‐buyer contracting: Asymmetric cost information and cutoff level policy for buyer participation

We consider the problem of designing a contract to maximize the supplier's profit in a one‐supplier–one‐buyer relationship for a short‐life‐cycle product. Demand for the finished product is stochastic and price‐sensitive, and only its probability distribution is known when the supply contract is written. When the supplier has complete information on the marginal cost of the buyer, we show that several simple contracts can induce the buyer to choose order quantity that attains the single firm profit maximizing solution, resulting in the maximum possible profit for the supplier. When the marginal cost of the buyer is private information, we show that it is no longer possible to achieve the single firm solution. In this case, the optimal order quantity is always smaller while the optimal sale price of the finished product is higher than the single firm solution. The supplier's profit is lowered while that of the buyer is improved. Moreover, a buyer who has a lower marginal cost will extract more profit from the supplier. Under the optimal contract, the supplier employs a cutoff level policy on the buyer's marginal cost to determine whether the buyer should be induced to sign the contract. We characterize the optimal cutoff level and show how it depends on the parameters of the problem. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 41–64, 2001     

再入快速抵达轨迹优化设计方法

针对再入初始速度大、飞行时间约束苛刻的轨迹设计问题,提出一种基于遗传算法和攻角+倾侧角联合优化的再入快速抵达轨迹优化设计方法。该方法在再入初段利用较大攻角迅速减小弹道倾角和拉平弹道,在再入后段/滑翔段联合设计和优化攻角+倾侧角变化规律以显著降低终端飞行速度,同时满足终端高度、终端航向角、最大动压、最大热流等约束条件。该方法能够提升传统升力体飞行器再入快速到达能力并拓展其应用范围。仿真结果表明,在典型飞行器参数和较大初始再入速度条件下,全程飞行时间小于12 min,终端速度能够小于7Ma,横向机动距离超过800 km。     

对流层散射下MPLS重路由信号去噪研究

针对对流层散射信道MPLS重路由信号数据含有噪声的问题,分析了Facility重路由原理和MPLS标签转发过程,引入小波阈值去噪算法对含噪声标签信号数据进行处理。利用一种随分解层数变化的阈值和折中阈值函数规则,来解决传统算法中的阈值确定和阈值函数选取存在的问题,针对折中阈值函数规则中参数a的确定问题,利用模拟数据,以信噪比(SNR)为目标函数,采用定步长变a形式,从而得到去噪效果最好时对应的a值,并用实测数据加以验证。仿真结果表明,改进后的算法在信噪比上有1.5 d B~3.4 d B的提高,均方差(RMSE)下降约0.01~0.03,为路由修复信号的去噪提供一种可行的方案。     

多约束下的高超声速飞行器三维非线性自适应末制导律

面向多约束下高超声速飞行器末制导过程中的通道耦合、参数扰动、模型失配等突出问题,设计一种适于高超声速飞行器的三维非线性自适应末制导律。为了模型描述的完整性和简洁性,引入视线旋量和旋量速度的概念,并基于此建立三维制导参考模型和实际系统的表达式;为了保证制导律的鲁棒性和自适应性,基于自适应控制理论,设计一种三维非线性自适应制导律;通过数学推导证明了该制导律的稳定性。该制导律能够从理论上克服高超声速飞行器末制导面临的通道耦合、参数扰动、模型失配等突出问题,满足多约束制导要求。仿真结果验证了所设计制导律的有效性。     

On efficiency of multistage channel with bargaining over wholesale prices

This article considers a multistage channel with deterministic price‐sensitive demand. Two systems for pricing decisions, that is, the bargaining system and the leader‐follower system, are compared. We characterize the necessary and sufficient conditions on the power structure, under which the solution of the bargaining system Pareto dominates that of the leader‐follower system. Also, under such conditions, we give a tight upper bound of channel efficiency of the bargaining system, which converges to 100% channel efficiency as the number of stages increases to infinity. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 449–459, 2016     

OFDM系统中基于补零DFT信道插值算法的研究

针对OFDM系统中基于补零DFT实现信道插值的算法,对传统的时域方法和变换域方法进行了分析,并提出了一种新的补零方法。首先通过理论分析指出传统的基于补零DFT实现信道插值算法中,时域方法和变换域方法是等效的;通过对信道插值算法中冲激响应估计序列进行补零的分析,指出补零操作是为了重构出冲激响应的N点采样序列(N表示总子载波数),并针对传统补零方法在一定条件下产生的重构误差,提出了一种新的补零方法。仿真结果表明以上理论分析是正确的,新补零方法可以减小一定条件下的重构误差,增强信道插值算法对信道延迟分布的鲁棒性,有效提高系统的性能。     

基于FC-AE-1553B通信协议的网络仿真

对于FC-AE-155B通信协议与光纤通道(FC)技术的应用进行了研究.针对航空电子设备的通信要求进行了独立的建模,验证了FC-AE-1553B协议在航电系统中的传输能力.实验搭建了对立的FC仲裁网络并按照FC-AE-1553B协议制定了包模型,建立了节点模型、链路模型.按照协议要求制作了进程模型设计了有限状态机.在OPNET仿真环境下对航电设备的FC网络进行了构建,测评了基于FC网络的FC-AE-1553通信协议的应用能力.     

飞航导弹齐射发射时间的一种快速规划算法

多发飞航导弹齐射时,各发导弹之间存在碰撞或者相互干扰的可能,为了保证导弹飞行安全,需要对各发导弹的飞行管道进行分析,以此规划各发导弹发射时间.为此在对飞航导弹初段航迹分析的基础上,建立了一种发射时间的快速规划算法,实现了以较小的计算量规划发射时间,并且通过仿真计算证实了该算法是正确的.