Performance evaluation and optimization design of photoelectric pyrometer detection optical system

The measurement and control of high temperature play very important roles in national defense, military, scientific experiments, industrial and agricultural production. Photoelectric pyrometer is one of the important radiation thermometers for non-contact temperature measurement. It has an important application in the field of high temperature measurement, and its performance directly affects the accuracy of temperature measurement. By improving the design of the detection optical system of the photoelectric pyrometer, the imaging performance of the photoelectric pyrometer can be improved effectively, and the temperature measurement accuracy can be improved. In this paper, the temperature measurement principle of photoelectric pyrometer, the working principle of the detection optical system and the composition of the system are introduced. The optical components that affect the imaging of the optical system of the photoelectric pyrometer are analyzed. The optical pyrometer detection optical system is simulated by ZEMAX software, based on the analysis results, the Modulation Transfer Function (MTF) and the spot Diagram are used as the main evaluation criteria to optimize the design of the objective lens of the photoelectric pyrometer detection optical system. The imaging performance of the photoelectric pyrometer detection optical system and the accuracy of temperature measurement of the photoelectric pyrometer are improved by optimization design of the detection optical system.     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.     

石英/双酚E型氰酸酯复合材料的制备与性能

采用实验方法研究双酚E型氰酸酯树脂的黏度和固化特性,揭示催化剂对双酚E型氰酸酯树脂固化特性的影响规律;采用树脂传递模塑和真空导入模塑工艺制备石英纤维/双酚E型氰酸酯复合材料,并考察其力学性能。结果表明,双酚E型氰酸酯树脂室温至90℃范围内的黏度小于300 m Pa·s,凝胶时间大于10 h,起始固化温度、固化温度和终止固化温度分别为186±5℃,235±5℃和286±5℃;固化特征温度随着催化剂含量的增加而降低,直至催化剂饱和,其饱和范围为0.02%~0.03%,可使双酚E型氰酸酯树脂体系的固化温度降低约60℃,从而避免爆聚,实现液相法成型其复合材料;真空导入模塑工艺制备的石英纤维/双酚E型氰酸酯复合材料的力学性能明显优于树脂传递模塑制备试样。     

碳纤维增强聚合物基复合材料频率选择表面的电磁传输特性

为了避免采用金属频率选择表面制备的天线罩中存在的热残余应力和弱黏接界面等问题,采用与聚合物基复合材料罩壁结构相容性好的碳纤维增强聚合物基复合材料制备频率选择表面,利用自由空间法对试样的电磁传输性能进行测试,并采用数值分析模型对碳纤维复合材料频率选择表面的电磁传输机制和电磁传输影响因子进行分析。结果表明:碳纤维复合材料频率选择表面具有频率选择功能,但谐振频率处的电磁传输损耗较大;通过改变复合材料频率选择表面的单元缝隙率、厚度、电导率以及介电常数可以实现对其电磁传输性能的调节。     

阻拦索张力控制方法

飞机阻拦装置是机场保证飞机正常降落和拦阻因意外原因冲出跑道的飞机的重要保障设施。针对现有机械型阻拦装置难以适应未来多种机型阻拦需求的现状,提出一种以阻拦电机为吸能元件的电磁阻拦装置,搭建考虑阻拦索弯折波影响在内的电磁阻拦装置模型,设计电磁阻拦装置的闭环控制算法,并利用仿真进行了验证。     

创新微时代军事微话语的大传播格局

随着"微博""微电影""微信""微视"等快速涌现,人类社会已进入"微时代"。通过微理论与微实践分析,研究了微技术与微平台,阐述了微组织与微法规,剖析了微活动与微内容,介绍了微人才与微受众。研究表明,军队媒体要紧跟微时代,开展大传播;善用微平台,发挥大作为;整合微信息,打造大数据;聚焦微生活,放眼大世界;增强微媒商,建设威阵地。     

SiC纤维表面CVD SiC涂层对其单丝强度的影响

采用化学气相沉积(CVD, Chemical Vapor Deposition)工艺在KD-I型SiC纤维表面制备了SiC涂层,选择2h、4h、6h和8h四个时间点研究了沉积时间对纤维性能的影响.结果表明:具有CVD SiC涂层的SiC纤维较无涂层的纤维来说强度有所下降;在所研究的沉积时间范围内,随着沉积时间的增加,涂层的厚度有所增加,涂层由不连续的岛状转变为连续层状,纤维的单丝强度出现了先升后降的趋势.     

一种曲伸式 DFB 光纤激光水听器探头的研究

为了提高 DFB(分布反馈式)光纤激光水听器的声压灵敏度,改善其动态特性,设计了一种曲伸式DFB 光纤激光水听器探头结构.该结构在保持激光器原有优点的同时,通过增大声压作用面积并将压力转化为对激光腔的轴向应变,有效地实现了声压增敏,同时通过机械结构改善了水听器的动态特性.利用有限元软件 ANSYS 对该结构进行了优化设计,加工制作了备构件并对 DFB 光纤激光器进行了封装,制作出长度约80 mm、直径仅6 mm的水听器原型样品并进行了实验研究.实验结果表明,采取该种形式的结构对 DFB光纤激光器进行封装后,探头的声压灵敏度提高了约17.5 dB,在500～1 500 Hz频率范围内具有较平坦的灵敏度响应.     

二轴晶外锥折射的理论分析

从晶体的简正模方程出发,求得在二轴晶体中,当光线沿第二类光轴（光线轴）方向行进时,所对应的电场矢量和电位移矢量,并通过几何证明,验证所有折射光线在晶体内均在同一锥面上。     

智能控制在光纤陀螺光源稳定控制中的应用

根据光纤陀螺(FOG)对超辐射发光二极管(SLD)光源输出光功率的稳定性要求,针对目前SLD光源一致性差的特点,提出Fuzzy PID控制的光控实现方案。经验证,该智能光功率闭环控制能灵活调整SLD期望输出光功率值,不仅能实现SLD在宽温度范围内保持较高的光功率稳定性,且系统具有较强的鲁棒性。