金属橡胶衬垫电磁屏蔽性能与测试

从金属橡胶材料的结构入手,研究了金属橡胶衬垫材料的电磁屏蔽（SE）机理,推导出金属橡胶电磁屏蔽效能的计算公式。通过实验,测量出金属橡胶电磁屏蔽衬垫的电磁屏蔽效能,并对屏蔽效能的计算公式进行了验证,研究结果为金属橡胶材料在电磁防护领域的普及和应用提供理论基础。     

虚拟环境下柔性线缆建模方法

研究了虚拟环境下柔性线缆建模方法,给出了离散控制点线缆简化模型和计算各离散控制点坐标值的算法。针对柔性线缆在虚拟环境中的碰撞检测问题,具体分析了从物体侧面绕过和从物体上表面经过2种碰撞检测情况,基于深度矢量和体矢量碰撞检测算法,给出了碰撞检测响应算法。     

柔性长鳍扭波推进数学模型分析

以"尼罗河魔鬼"鱼的柔性长背鳍扭波推进模式为研究对象,通过观察活鱼的游动模式,提取影响扭波推进的运动学要素,建立了描述柔性长背鳍扭波推进时动态曲面的数学模型。研究了鳍条仰角与摆动规律对鳍面的影响。最后,用细长体理论分析并计算出推力分布。研究表明,鳍条仰角在φ=85°的情况下所形成的鳍面与垂直鳍条所形成的鳍面相比,其最大偏离值与鳍长之比为1.7%,可以用垂直于基线的鳍条制作模型;鳍条按正弦规律摆动时所形成的扭波波形鳍面与实鱼鳍面相似。     

一种无缓冲的光互连网络的吞吐率性能分析及优化

针对当前高性能计算机光互连网络中存在的光缓冲不易实现的问题,提出了一种无缓冲的光互连网络结构BOIN,并在对网络结构进行建模和分析的基础上,研究了网络的吞吐率随不同的输入负载和网络规模而变化的规律,给出了在一定的互连总规模和输入负载下,网络实际吞吐率达到最大值时网络拓扑结构所必须满足的条件.最后用模拟实验证明了这一结果的正确性.     

抽鞭现象研究综述

介绍了抽鞭现象的理论与试验研究情况,着重介绍了试验研究结果及抽鞭过程的能量方法与动量方法,以及近年来抽鞭过程理论研究的最新进展,总结出抽鞭现象的一般特点及影响因素,并指出抽鞭现象与大型柔性结构中存在的部分现象如大型伞伞衣顶部抽打、空中加油机软管的摆动等存在相似性,对抽鞭现象的研究有助于深化对该类现象的机理认识。     

Stochastic production capacity: A bane or a boon for quick response supply chains?

The quick response (QR) system that can cope with demand volatility by shortening lead time has been well studied in the literature. Much of the existing literature assumes implicitly or explicitly that the manufacturers under QR can always meet the demand because the production capacity is always sufficient. However, when the order comes with a short lead time under QR, availability of the manufacturer's production capacity is not guaranteed. This motivates us to explore QR in supply chains with stochastic production capacity. Specifically, we study QR in a two-echelon supply chain with Bayesian demand information updating. We consider the situation where the manufacturer's production capacity under QR is uncertain. We first explore how stochastic production capacity affects supply chain decisions and QR implementation. We then incorporate the manufacturer's ability to expand capacity into the model. We explore how the manufacturer determines the optimal capacity expansion decision, and the value of such an ability to the supply chain and its agents. Finally, we extend the model to the two-stage two-ordering case and derive the optimal ordering policy by dynamic programming. We compare the single-ordering and two-ordering cases to generate additional managerial insights about how ordering flexibility affects QR when production capacity is stochastic. We also explore the transparent supply chain and find that our main results still hold.     

临近空间大型柔性充气囊体结构特性分析*(专题约稿)

以临近空间平流层飞艇柔性充气囊体为研究对象,根据充气结构设计理论对充气囊体结构的最小压差和应力进行计算,建立平流层飞艇充气囊体结构有限元模型,在模型验证的基础上,采用非线性有限元方法对平流层飞艇充气囊体结构特性进行仿真分析,得到了囊体结构在不同压差和吊舱载荷作用下应力和变形分布及变化规律,并分析了结构加强配置对囊体应力和变形的影响,为平流层飞艇结构设计提供技术支撑和参考依据。     

某越野火箭炮行驶垂向动态特性研究

以某型高机动越野火箭炮为研究对象,基于随机路面激励,应用多刚体系统动力学和柔性多体动力学的理论,建立该越野火箭炮刚柔耦合模型,研究其行驶垂向动力学特性。考虑了油气弹簧的非线性特性以及轮胎的作用,重点编写了B、C、D级路面的随机路面谱,进行不同车速下的行驶动力学仿真。结果表明,非线性的油气悬架系统能较好地减轻路面的垂向冲击。仿真得到的车炮动态响应特性曲线,为该高机动火箭炮的研制提供了有用的参考。     

典型线性火工分离装置作用过程数值模拟及试验研究

针对目前线性火工分离装置的优化设计主要依靠试验验证,成本高且设计优化迭代慢的问题,采用任意拉格朗日-欧拉方法建立典型线性火工分离装置的数值模型。通过火工分离试验和光子多普勒测速试验对上述数值模型进行验证,发现该数值模型具有较好的精度。使用该模型研究上述火工分离装置分离瞬态过程的力学机理,并定量分析多种因素对分离装置重点部位等效塑性应变等关键特征量的影响。研究发现,芯药线密度、分离板削弱槽底部的圆角半径对分离装置的作用过程有重大影响。此外,保护罩材质、削弱槽开口角度、分离板槽结构尺寸等因素对分离过程也有一定影响,但其影响相对较小。研究结果可以为典型线性火工分离装置的优化设计提供基础。     

Efficient algorithms for flexible job shop scheduling with parallel machines

Job shop scheduling with a bank of machines in parallel is important from both theoretical and practical points of view. Herein we focus on the scheduling problem of minimizing the makespan in a flexible two-center job shop. The first center consists of one machine and the second has k parallel machines. An easy-to-perform approximate algorithm for minimizing the makespan with one-unit-time operations in the first center and k-unit-time operations in the second center is proposed. The algorithm has the absolute worst-case error bound of k − 1 , and thus for k = 1 it is optimal. Importantly, it runs in linear time and its error bound is independent of the number of jobs to be processed. Moreover, the algorithm can be modified to give an optimal schedule for k = 2 .