虚拟行为机制下的恶意代码检测与预防

Cohen证明了不存在一个算法可以精确地检测出所有可能的计算机病毒。MCDPM是一种基于虚拟行为机制的恶意代码检测方法,其目的是避开Cohen结论的限制,从而实现对恶意代码的有效检测和预防。MCDPM将传统的代码行为过程分解为虚拟行为发生和实际行为发生两个部分,通过对虚拟行为及其结果的监视和分析,实现对代码行为的精确检测。由于MCDPM的分析结果是建立在代码的确切行为之上,因此其判断结果是真实和准确的。对于非恶意代码,MCDPM则可以通过实际行为发生函数将其运行结果反映到系统真实环境,保持系统状态的一致性。MCDPM可以用于对未知恶意代码的检测,并为可信计算平台技术的信任传递机制提供可信来源支持。     

弯曲载荷作用下复合材料T型接头的失效分析

运用蔡-吴逐步失效判据和黏聚接触模型建立弯曲加载下的T型接头的有限元模型。对复合材料T型接头在弯曲加载下的损伤机理和承载能力进行数值模拟。结合静态弯曲加载实验,揭示T型接头在弯曲破坏过程中的四种失效模式。T型接头的弯曲失效载荷的有限元模型计算结果与实测值吻合较好。     

Firm embedding behavior of annular grooved projectiles impacting ductile metal targets

Annular grooved projectiles (AGPs) have drawn ongoing concerns as an advanced penetrator for their excellent anti-rebound capability in impacting metal plates. They could become embedded solidly in the target surface during low-velocity impact. In this investigation, the firm embedding behavior of AGP was observed by impact experiments. Corresponding numerical simulations provided a better understanding of this process. Experimental and numerical results indicated that the firm embedding behavior of AGP was mainly due to the filling-material in the groove rather than the friction between the projectile and target, unlike traditional shape such as conical projectile. According to observation, firm embedding process can generally be subdivided into four stages: initial-cratering stage, groove-filling stage, filling-material failure stage and rebound vibration stage. Moreover, the damage mechanics of target material around crater was obtained through microscopic tests. A comparison of the cross-sectional figures between the experiment and simulation proved that the analysis and the proposed method were reasonable and feasible, which further demonstrated that the firm embedding behavior has application potential in new concept warheads.     

防空监视网络传感器的协作管理

针对防空监视网络的传感器管理问题,讨论了基于多Agent技术的协作管理策略。通过对防空监视网络传感器协作行为的分析,建立了传感器的协作行为模型。结合防空监视传感器的功能,设计了传感器Agent的结构模型。依据防空监视网络传感器的使命要求和完成任务能力,提出了防空监视网络传感器Agent的协商处理策略。     

Selling to strategic and loss‐averse consumers: Stocking,procurement, and product design policies

Motivated by the presence of loss‐averse decision making behavior in practice, this article considers a supply chain consisting of a firm and strategic consumers who possess an S‐shaped loss‐averse utility function. In the model, consumers decide the purchase timing and the firm chooses the inventory level. We find that the loss‐averse consumers' strategic purchasing behavior is determined by their perceived gain and loss from strategic purchase delay, and the given rationing risk. Thus, the firm that is cognizant of this property tailors its inventory stocking policy based on the consumers' loss‐averse behavior such as their perceived values of gain and loss, and their sensitivity to them. We also demonstrate that the firm's equilibrium inventory stocking policy reflects both the economic logic of the traditional newsvendor inventory model, and the loss‐averse behavior of consumers. The equilibrium order quantity is significantly different from those derived from models that assume that the consumers are risk neutral and homogeneous in their valuations. We show that the firm that ignores strategic consumer's loss‐aversion behavior tends to keep an unnecessarily high inventory level that leads to excessive leftovers. Our numerical experiments further reveal that in some extreme cases the firm that ignores strategic consumer's loss‐aversion behavior generates almost 92% more leftovers than the firm that possesses consumers’ loss‐aversion information and takes it into account when making managerial decisions. To mitigate the consumer's forward‐looking behavior, we propose the adoption of the practice of agile supply chain management, which possesses the following attributes: (i) procuring inventory after observing real‐time demand information, (ii) enhanced design (which maintains the current production mix but improves the product performance to a higher level), and (iii) customized design (which maintains the current performance level but increases the variety of the current production line to meet consumers’ specific demands). We show that such a practice can induce the consumer to make early purchases by increasing their rationing risk, increasing the product value, or diversifying the product line. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 435–453, 2015     

全CFRP筋混凝土柱低周反复荷载试验研究

考虑轴压比、剪跨比和配箍形式的影响,对6根全CFRP筋混凝土柱进行低周反复荷载试验,通过分析滞回曲线、骨架曲线、位移延性系数和耗能能力等特征,研究CFRP筋混凝土柱的抗震性能。试验结果表明:CFRP筋混凝土柱具有较强承载能力和变形能力;轴压比和剪跨比是影响试件抗震性能的主要因素,轴压比越小,试件的变形和耗能能力越强,刚度退化越平缓,剪跨比越大,试件的变形能力越强;通用屈服弯矩法计算得到的延性系数能够较好反映CFRP筋混凝土柱的延性,轴压比越小、剪跨比越大,试件的延性越好;新型螺旋式矩形箍筋在试件延性及耗能方面表现良好,可以应用于工程实际。     

Reaction characteristic of PTFE/Al/Cu/Pb composites and application in shaped charge liner

In this paper, the reaction characteristic and its application in shaped charge warhead of a novel reactive material, which introduced copper (Cu) and plumbum (Pb) into traditional polytetrafluoroethylene/aluminum (PTFE/Al), are studied. The thermal analysis and chemical reaction behavior of the PTFE/Al/Cu/Pb mixture are investigated by Differential Scanning Calorimetry (DSC),Thermo-gravimetry (TG), and X-ray Diffraction (XRD) techniques. Then, the shaped charge liners with PTFE/Al/Cu/Pb reactive materials are fabricated, and the X-ray experiments show that they could form reactive jets with excellent performance under the detonation effects of the shaped charge. Based on that, the penetration experiments of shaped charge with PTFE/Al/Cu/Pb reactive liner against steel plates are carried out, and the results demonstrate that the PTFE/Al/Cu/Pb reactive jets could produce a deeper penetration depth compared to the traditional PTFE/Al reactive jets. Meanwhile, the PTFE/Al/Cu/Pb reactive jets also show significant inner-blast effects, leading to dramatically cracking or fragmentation behavior of the penetrated steel plates. This new PTFE/Al/Cu/Pb reactive liner shaped charge presents enhanced penetration behavior for steel targets that incorporates the penetration capability of a high-density and ductility jet, and the chemical energy release of PTFE-matrix reactive materials.     

框支短肢剪力墙转换结构不同墙肢布置方式抗震试验研究

框支短肢剪力墙转换结构在实际工程中已得到广泛应用,但其理论研究尚需完善.在试验和分析的基础上,通过对不同墙肢布置方式的两榀斜柱式转换结构试件在竖向和水平荷载共同作用下受力机理、承载能力、破坏形态、滞回特性、变形能力、延性系数、抗震耗能以及破坏机制等抗震性能参数的分析和对比,揭示了墙肢布置方式变化对整个转换结构受力性能及...     

BFRP连续螺旋箍筋混凝土梁抗剪性能试验研究

为研究BFRP连续螺旋箍筋的抗剪性能,设计制作了6根配置BFRP连续螺旋箍筋的混凝土梁和2根配置矩形连续螺旋钢箍的对比混凝土梁.通过试验,得出了BFRP连续螺旋箍筋混凝土梁的抗剪性能,分析了配箍率、剪跨比和纵筋率等因素对构件抗剪性能的影响:构件的受剪破坏模式分为斜拉破坏和斜压破坏两种类型;在不同的受剪破坏模式下,斜裂缝...     

海战仿真中反潜直升机CGF的行为建模方法

CGF的行为建模是构建CGF系统的核心和难点,近来CXBR在CGF的行为建模中得到广泛应用。然而,基于CXBR的行为建模缺乏情感推理,因此在传统CXBR框架中增加个性和情绪两个抽象类,提出了基于改进CXBR的行为建模方法,使得CGF能够表现情感。从反潜直升机作战实际出发,在CXBR转换逻辑中引入产生式表示法和层次分析法,实现了基于改进CXBR的反潜直升机CGF系统构建,对该方法的可行性进行了初步探索。