基于预警时间窗口的空天反导预警体系构建

如何构建一个完善的反导预警体系并确保反导预警时间充足是当前的一个研究热点,创新性地应用反导预警时间窗口分析各类预警系统的性能,并为反导预警体系构建给出相关决策依据。首先结合预警时间窗口的概念,给出天基支援下预警时间窗口的数学描述;然后,建立了反导预警过程中攻防双方的数学模型及仿真方法;接着,对反导预警时间窗口的计算进行了具体分析;最后,结合具体仿真实例,分析了天基预警卫星对反导预警时间窗口的扩展作用,得出了一些较为实用的结论。     

舰船维修器材保障点选址决策模型及算法

传统的最大覆盖选址模型没有考虑对服务半径外的需求点的满足和服务时间的响应,而在舰船维修器材保障中,不论需求点到保障点的距离是否大于服务半径,都应对其进行保障服务,且在保障过程中要满足保障时间控制在不影响舰船正常维修任务时间内。针对此问题,运用广义最大覆盖选址模型和时间满意度函数,构建基于时间满意的广义最大覆盖选址模型,并运用一种混合算法———基于遗传模拟退火算法的BP算法对模型进行求解。最后,运用该算法对实例进行了分析计算,计算结果验证了该算法的有效性。     

遥操作交会对接系统研究

遥操作交会对接是指操作人员在远端通过遥操作方式控制追踪航天器进行交会对接,主要用于无人航天器自动交会对接系统故障条件下平移靠拢段的交会对接控制.简要介绍了遥操作交会对接的基本概念及其国内外研究现状;结合我国载人航天工程的基本特点,设计了适用于我国未来空间站任务的遥操作交会对接系统;根据设计的系统方案,设计和开发了相应的遥操作交会对接仿真系统,并进行了部分仿真分析和遥操作交会对接试验,初步验证了设计方案的可行性.     

一种改进方位向非线性CS大斜视角SAR成像算法

大斜视角SAR成像时存在严重的距离走动现象,慢时域的距离走动校正在解决这一问题同时导致了聚焦深度问题.分析了二维频域解耦合后残余相位误差以及时域走动校正后的多普勒调频率误差,提出一种改进的方位向非线性CS算法,校正了三次以上距离迁徙带来的相位误差,同时采用改进非线性CS扰动方程补偿了随方位偏移量线性变化的调频率误差.仿真结果表明,改进算法的大斜视角大场景成像性能优于传统的高分辨大斜视角成像算法.     

F—K理论在堆积固体自燃火灾调查中的应用

堆积固体自燃火灾是常见多发火灾，由于其规模庞大、着火延迟期长等特点，难以进行全尺寸的模拟实验，为火灾预防和调查工作带来了一定的难度。基于F—K（Frank—Kamenetskii）理论，将小规模实验结果外推，从而预测或判断一定尺寸的堆积固体在一定的环境温度下自燃起火的危险性。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

电子时间引信检测仿真试验研究

为提高电子时间引信的检测能力，介绍了电子时间引信检测仿真试验，分析了仿真试验的原理，给出了检测仿真试验的试验方法。经实际检测表明，该检测仿真试验能够安全可靠地完成电子时间引信的日常检测任务。     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

H2O2/HTPB固液混合发动机点火试验研究

利用H2O2催化分解原理,设计了烃类燃料在催化分解的90%H2O2中能燃烧的点火器,然后采用该点火器进行H2O2/HTPB固液混合发动机点火试验研究.试验结果表明,该点火器能够成功启动H2O2/HTPB固液混合发动机,且当混合比偏离最佳混合比后,发动机的燃烧效率降低.     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008