国有军工集团生产与创新双效率研究

文章利用DEA方法对2015-2016年我国国有军工集团的生产效率和创新效率进行了分析,结果发现:我国国有军工集团的生产效率在近两年整体上有所提升,受行业影响小于自身因素影响,受管理、技术等水平的影响与来自规模因素的影响相差不大;创新效率在近两年整体上有所下降,受行业影响与自身因素影响均较大,无效率主要来自创新管理水平或技术条件的不足;生产效率与创新效率呈现统计上不显著的正相关关系。在此基础上,提出了军工集团实施国企改革的几点建议,以供有关方面参考。     

发动机平均值模型的开发与检验

建立了一个车用增压柴油机工作过程仿真的平均值模型.这个模型重在描述发动机状态变量的时间平均值,结构紧凑,使用方便,实例计算结果与试验值符合较好,适合于电控柴油机硬件在环仿真系统应用.     

Dynamic learning,pricing, and ordering by a censored newsvendor

We address the problem of determining optimal ordering and pricing policies in a finite‐horizon newsvendor model with unobservable lost sales. The demand distribution is price‐dependent and involves unknown parameters. We consider both the cases of perishable and nonperishable inventory. A very general class of demand functions is studied in this paper. We derive the optimal ordering and pricing policies as unique functions of the stocking factor (which is a linear transformation of the safety factor). An important expression is obtained for the marginal expected value of information. As a consequence, we show when lost sales are unobservable, with perishable inventory the optimal stocking factor is always at least as large as the one given by the single‐period model; however, if inventory is nonperishable, this result holds only under a strong condition. This expression also helps to explain why the optimal stocking factor of a period may not increase with the length of the problem. We compare this behavior with that of a full information model. We further examine the implications of the results to the special cases when demand uncertainty is described by additive and multiplicative models. For the additive case, we show that if demand is censored, the optimal policy is to order more as well as charge higher retail prices when compared to the policies in the single‐period model and the full information model. We also compare the optimal and myopic policies for the additive and multiplicative models. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

关于有限时间热力学的最小熵产生最大值原则

本文力图从能表征状态的热力学参数熵的变化中找到有关有限时间热力学新的分析方法,提出了工作参数选择的最小熵产生最大值原则。这个原则揭示了有限时间热力学以时间为基础的“率”与非平衡热力学熵产生间的内在联系。据此,我们便可得到正、反向内可逆卡诺循环的最佳工作参数。为有限时间热力学的普遍应用研究提供了一新的线索。     

Capacitated selection problem

Optimizing the selection of resources to accomplish a set of tasks involves evaluating the tradeoffs between the cost of maintaining the resources necessary to accomplish the tasks and the penalty cost associated with unfinished tasks. We consider the case where resources are categorized into types, and limits (capacity) are imposed on the number of each type that can be selected. The objective is to minimize the sum of penalty costs and resource costs. This problem has several practical applications including production planning, new product design, menu selection and inventory management. We develop a branch‐and‐bound algorithm to find exact solutions to the problem. To generate bounds, we utilize a dual ascent procedure which exploits the special structure of the problem. Information from the dual and recovered primal solutions are used to select branching variables. We generate strong valid inequalities and use them to fix other variables at each branching step. Results of tests performed on reasonably sized problems are presented. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 19–37, 1999     

Analysis of production lines with Coxian service times and no intermediate buffers

This paper uses the holding time model (HTM) method to derive an approximate analytic formula for the calculation of the mean throughput of a K-station production line with no buffers between any two successive stations. Service times follow the two-stage Coxian (C²) distribution at all stations. The paper provides a formula that relates the third moment of the service completion (or virtual service) time with the respective parameters of the service time, the repair time and the time to breakdown (the latter is assumed to follow the exponential distribution). In this way, it concludes that under certain conditions the two-stage Coxian distribution can be used to approximate any general distribution matching the first three moments of the service completion time distribution. The mean holding times (consisting of the service and blocking periods) of all stations of the line are obtained in an analytical form. Numerical results are provided for the mean throughput of lines with up to 20 stations. These results are shown to have a good accuracy compared against results obtained from the Markovian state method (for short lines) and results from simulation (for longer lines). © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 669–685, 1998     

Minimal LST representations of MAP(n)s: Moment fittings and queueing approximations

A Markovian arrival process of order n, MAP(n), is typically described by two n × n transition rate matrices in terms of rate parameters. While it is straightforward and intuitive, the Markovian representation is redundant since the minimal number of parameters is n² for non‐redundant MAP(n). It is well known that the redundancy complicates exact moment fittings. In this article, we present a minimal and unique Laplace‐Stieltjes transform (LST) representations for MAP(n)s. Even though the LST coefficients vector itself is not a minimal representation, we show that the joint LST of stationary intervals can be represented with the minimum number of parameters. We also propose another minimal representation for MAP(3)s based on coefficients of the characteristic polynomial equations of the two transition rate matrices. An exact moment fitting procedure is presented for MAP(3)s based on two proposed minimal representations. We also discuss how MAP(3)/G/1 departure process can be approximated as a MAP(3). A simple tandem queueing network example is presented to show that the MAP(3) performs better than the MAP(2) in queueing approximations especially under moderate traffic intensities. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 549–561, 2016     

基于规则预置的应急事件指挥控制建模研究

为提高应急事件仿真过程中指挥控制模型的智能化程度和仿真结果的可信度,分析了应急事件指挥实体的指挥控制过程和指挥实体阃的信息交互关系,建立了基于预置规则的指挥控制模型,提出了驱动指挥控制模型运转的、表达应急事件指挥专业化知识的产生式指挥控制规则表达方式,重点研究了指挥控制规则的分类、定义和设计方法,并对该方法在仿真系统中的应用进行了分析,取得了比较理想的模拟效果.     

Optimal production ramp-up in the smartphone manufacturing industry

Motivated by challenges in the smartphone manufacturing industry, we develop a dynamic production ramp-up model that can be applied to economically satisfy nonstationary demand for short-life-cycle products by high-tech companies. Due to shorter life cycles and more rapid evolution of smartphones, production ramp-up has been increasingly critical to the success of a new smartphone. In the production ramp-up, the key challenge is to match the increasing capacity to nonstationary demand. The high-tech smartphone manufacturers are urged to jointly consider the effect of increasing capacity and decreasing demand. We study the production planning problem using a high-dimensional Markov decision process (MDP) model to characterize the production ramp-up. To address the curse of dimensionality, we refine Monte Carlo tree search (MCTS) algorithm and theoretically analyze its convergence and computational complexity. In a real case study, we find that the MDP model achieves revenue improvement by stopping producing the existing product earlier than the benchmark policy. In synthetic instances, we validate that the proposed MCTS algorithm saves computation time without loss of solution quality compared with traditional value iteration algorithm. As part of the Lenovo production solution, our MDP model enables high-tech smartphone manufacturers to better plan the production ramp-up.     

Optimal production and maintenance policy for imperfect production systems

A joint optimization of the production run length and preventive maintenance (PM) policy is studied for a deteriorating production system where the in‐control period follows a general probability distribution with non‐decreasing failure rate. In the literature, the sufficient conditions for the optimality of the equal‐interval PM schedule is explored to derive an optimal production run length and an optimal number of PM actions. Nevertheless, an exhaustive search may arise. In this study, based on the assumption that the conditions for the optimality of the equal‐interval PM schedule hold, we derive some structural properties for the optimal production/PM policy, which increases the efficiency of the solution procedure. These analyses have implications for the practical application of the production/PM model to be more available in practice. A numerical example of gamma shift distribution with non‐decreasing failure rates is used to illustrate the solution procedure, leading to some insight into the management process. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2006