基于旋转点电荷模型的舰船腐蚀电场

为了找出轴频电场无法彻底消除及实际测量中静电场产生波动曲线问题的原因,基于旋转点电荷的建模方法对舰船腐蚀电场进行研究。利用汉克尔变换对点电荷在三层介质中产生的电场进行近似求解,得出一定转速下感应电场随时间、螺旋桨半径及水面距离变化的规律曲线图,并通过实验验证了理论结果的正确性。结果表明:螺旋桨旋转产生的感应电场是构成舰船腐蚀电场的一部分,一定转速下的感应电场频率与螺旋桨转动频率一致,并会随着螺旋桨半径及与水面距离的增加而减小。     

Interface defeat studies of long-rod projectile impacting on ceramic targets

The interface defeat phenomenon always occurs when a long-rod projectile impacting on the ceramic target with certain velocity, i.e., the projectile is forced to flow radially on the surface of ceramic plates for a period of time without significant penetration. Interface defeat has a direct effect upon the ballistic performance of the armor piercing projectile, which is studied numerically and theoretically at present. Firstly, by modeling the projectiles and ceramic targets with the SPH (Smoothed Particle Hydrodynamics) particles and Lagrange finite elements, the systematic numerical simulations on interface defeat are performed with the commercial finite element program AUTODYN. Three different responses, i.e., complete interface defeat, dwell and direct penetration, are reproduced in different types of ceramic targets (bare, buffered, radially confined and oblique). Furthermore, by adopting the validated numerical algorithms, constitutive models and the corresponding material parameters, the influences of projectile (material, diameter, nose shape), constitutive models of ceramic (JH-1 and JH-2 models), buffer and cover plate (thickness, constraints, material), as well as the prestress acted on the target (radial and hydrostatic) on the interface defeat (transition velocity and dwell time) are systematically investigated. Finally, based on the energy conservation approach and taking the strain rate effect of ceramic material into account, a modified model for predicting the upper limit of transition velocity is proposed and validated. The present work and derived conclusions can provide helpful reference for the design and optimization of both the long-rod projectile and ceramic armor.     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.     

北斗系统新民用导航电文历书参数算法与性能分析

研究新公布的北斗民用导航电文中的两类历书与北斗二号导航电文历书的差异,对比分析各类历书对接收机首次定位时间的影响。利用实际的历书数据,比较不同历书类型的用户算法,分析不同龄期数据对接收机首次定位性能的影响。结果表明,高精度历书在1周的数据龄期内性能较为稳定,中等精度历书精度稍逊于高精度历书,但由于简化了电文空间,能接近高精度历书性能。简约历书进一步简化了参数数目和电文空间,尽管位置误差达到了数百千米,但却能在数月之后保持相应精度,有利于缩短接收机首次定位时间。     

横向效应增强型弹垂直侵彻薄靶的轴向剩余速度理论分析

为了得到横向效应增强型弹（Penetration with Enhanced Lateral Efficiency projectile, PELE）对金属薄靶垂直侵彻后的弹体轴向剩余速度,运用平面冲击波理论,对PELE的侵彻机理进行分析。参照平头弹体对靶板的侵彻模型,将PELE侵彻过程中的能量损失划分为以下几个部分：外壳体和内芯撞靶区域对应的环形塞块获得的能量、冲击波作用下弹体的内能增量以及剪切耗能等。然后根据能量守恒原理,得到PELE垂直侵彻金属薄靶后的PELE弹体轴向剩余速度的理论模型。为了验证该模型的合理性和准确性,设计相应的试验进行验证。结果表明,不同条件下得到的试验结果和理论模型得到的计算结果均吻合得较好。因此,得到的PELE垂直侵彻薄靶的轴向剩余速度理论模型可为工程应用提供指导和参考。     

An attacker‐defender model for analyzing the vulnerability of initial attack in wildfire suppression

Wildfire managers use initial attack (IA) to control wildfires before they grow large and become difficult to suppress. Although the majority of wildfire incidents are contained by IA, the small percentage of fires that escape IA causes most of the damage. Therefore, planning a successful IA is very important. In this article, we study the vulnerability of IA in wildfire suppression using an attacker‐defender Stackelberg model. The attacker's objective is to coordinate the simultaneous ignition of fires at various points in a landscape to maximize the number of fires that cannot be contained by IA. The defender's objective is to optimally dispatch suppression resources from multiple fire stations located across the landscape to minimize the number of wildfires not contained by IA. We use a decomposition algorithm to solve the model and apply the model on a test case landscape. We also investigate the impact of delay in the response, the fire growth rate, the amount of suppression resources, and the locations of fire stations on the success of IA.     

飞机反区速度矢量不稳定及其控制的机理

在信号流图的基础上,提出多回路分析的方法,并用于研究反区时速度矢量不稳定及其稳定控制的机理。建立了纵向动力学的信号流图,并证明了一个回路的收敛性定理。在此基础上,通过理论分析得出了速度矢量不稳定在不同层面上的原因,也得出了速度和轨迹的发散度表达式等,并表明阻力-速度曲线、轨迹角-速度曲线、极曲线、阻力系数曲线等存在相互对应的反区和正区,并且阻力-速度曲线和轨迹角-速度曲线在斜率上成比例。研究得出进场动力补偿系统下速度矢量的稳定临界条件、收敛度、稳定机理等,理论分析和仿真比较了速度恒定进场动力补偿系统和迎角恒定进场动力补偿系统在控制性能上的差异。     

阻拦索张力控制方法

飞机阻拦装置是机场保证飞机正常降落和拦阻因意外原因冲出跑道的飞机的重要保障设施。针对现有机械型阻拦装置难以适应未来多种机型阻拦需求的现状,提出一种以阻拦电机为吸能元件的电磁阻拦装置,搭建考虑阻拦索弯折波影响在内的电磁阻拦装置模型,设计电磁阻拦装置的闭环控制算法,并利用仿真进行了验证。     

敷设气囊的充水圆柱壳的声辐射特性

为降低充水圆柱壳受内部点声源激励时的水下辐射噪声,在其外壳上敷设气囊,形成气囊圆柱壳。为指导气囊圆柱壳的设计,将充水裸圆柱壳和充水气囊圆柱壳分别简化为单、双层无限长隔板。比较隔板、气体与水的波阻抗,分析气体声速与层厚对双层无限长隔板在平面声波入射时的低频声辐射的影响机理。分析表明,声速小的气体和适当的气层厚度可以降低双层障板的辐射噪声。采用声无限元法计算气囊圆柱壳的水下声辐射,结论与对隔板的机理分析吻合。优化设计出的充水CO2气囊圆柱壳的水下辐射声功率与远场辐射声压明显低于充水裸圆柱壳。     

基于实射数据的舰炮弹药当量系数

弹药当量系数是准确评估身管寿命的关键参数。通过对某型小口径舰炮的研究,提出了一种基于实弹射击数据的当量系数计算方法。对实弹射击试验获取的身管内膛烧蚀磨损数据进行了分析处理,拟合得到了身管磨损速度曲线,并计算得到了3种射击条件下的当量系数。研究结果为评估该类型火炮身管寿命提供了重要的数据支撑。