在单晶硅片上直接电化学沉积制备镍反opal光子晶体

采用电化学沉积工艺直接向组装在单晶硅片上的聚苯乙烯胶体晶体中填充金属Ni,成功制备了Ni的反opal光子晶体。采用线性扫描伏安法研究了单晶硅表面的化学刻蚀对Ni的电化学沉积过程的影响,并采用扫描电子显微镜(SEM)、X射线衍射等对Ni反opal光子晶体的形貌和结构进行了观察分析,对其光学性能进行了初步研究。研究结果表明,对单晶硅片表面进行化学刻蚀有利于金属Ni的电化学沉积;在PS胶体晶体模板中电化学生长的金属Ni呈多晶状态,去除模板后形成了金属Ni的有序多孔结构。     

Asia-Pacific Demand for Military Expenditure: Spatial Panel and SUR Estimates

This article investigates the demand for military expenditure for a sample of key Asia-Pacific countries. Spatial panel demand estimates are presented for three joined spatial units using a fixed-coefficient spatial lag model based on a two-step efficient GMM estimator. Spatial autoregression estimates are next presented for 1991–2015, founded on alternative kinds of country connectivities, such as contiguity, inverse distance, discrete distance, and power-projection considerations. Finally, 11 select countries’ demands for defense equations are estimated using seemingly unrelated regressions. From alternative perspectives, these estimated models indicate how Asia-Pacific countries respond to the defense spending of other countries. In the spatial runs, free riding is prevalent despite the growing military might of China, which apparently is not generally viewed as a threat. For the sample period, the projection of Chinese or American power is a relevant spatial factor. The main threat is reflected in non-U.S. allies’ reaction to U.S. allies’ defense spending during 1991–2015 and to Chinese defense spending after 2002.     

基于反正切函数的测试性分配方法

针对现有主流测试性分配方法存在的分配指标过低和过高等不合理问题,分析认为其根源在于现有方法采用线性分配函数,而该函数不符合测试性指标提升规律,为此,构造了一种基于反正切函数的测试性分配函数,设计故障检测率与故障隔离率指标的分配算法,开展案例应用并与经典故障率分配法和综合加权分配法进行对比分析,结果表明随着分配权重(故障率)的变大,本方法分配指标的增幅逐渐减小,不会出现极低指标和超1指标的不合理情形。     

空中非合作目标旋转部件位置估计方法

针对当前空中非合作目标中旋转部件位置估计方法稳健性不足的问题,在分析旋转部件在高分辨距离像和逆合成孔径雷达像中分布特性的基础上,提出应用逆合成孔径雷达像的方位向距离单元熵和局部径向距离单元熵的旋转部件位置估计方法。该方法能够提升空中非合作目标逆合成孔径雷达成像过程中旋转部件信号分离的准确度。仿真数据和实测数据处理结果证明了所提方法的有效性,通过在实测数据中叠加额外噪声,进一步检验了所提方法对噪声的稳健性。     

评估航空重力系统误差及向下延拓的逆泊松半参数方法

常用航空重力系统误差事后处理方法需外部重力数据,但很多地区无外部重力数据。研究发现,半参数模型可在无外部数据时估计系统误差。先用自然样条函数为系统误差建模,后用补偿最小二乘法和光滑参数求解,最后用广义交叉核实法(不需要先验信息)选取光滑参数。将半参数模型用于向下延拓逆泊松积分,建立逆泊松半参数混合模型,既可无外部重力时估计系统误差,又可向下延拓。实验结果表明:无外部重力时逆泊松积分和最小二乘配置法受系统误差影响最大,向下延拓精度最差;正则化算法可减弱系统误差影响,向下延拓精度较好;逆泊松半参数混合模型可估计系统误差,向下延拓精度最好。     

Estimating component characteristics from system failure‐time data

Suppose that failure times are available from a random sample of N systems of a given, fixed design with components which have i.i.d. lifetimes distributed according to a common distribution F. The inverse problem of estimating F from data on observed system lifetimes is considered. Using the known relationship between the system and component lifetime distributions via signature and domination theory, the nonparametric maximum likelihood estimator _N(t) of the component survival function (t) is identified and shown to be accessible numerically in any application of interest. The asymptotic distribution of _N(t) is also identified, facilitating the construction of approximate confidence intervals for (t) for N sufficiently large. Simulation results for samples of size N = 50 and N = 100 for a collection of five parametric lifetime models demonstrate the utility of the recommended estimator. Possible extensions beyond the i.i.d. framework are discussed in the concluding section. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

纯方位TMA的有偏性分析

纯方位TMA是一类典型的非线性问题,它常表现出一些独特的性质,有偏性就是其中之一。对纯方位TMA常用的伪线性估计器的有偏性进行了分析,指出偏倚是由伪线性化造成的。该结论得到了仿真计算结果的支持。仿真结果还表明,偏倚程度同测量误差大小、几何态势、己艇机动航路等诸多因素有关。     

2D组网雷达目标真实高度的最小二乘估计

针对目标高度估计问题,给出了基于三部以上雷达距离测量的2D组网雷达目标真实高度的最小二乘估计,同时也给出了利用三部雷达计算目标真实高度的非最小二乘算法,并通过大量仿真分析了两种算法的性能。该算法能够在2D组网雷达内实现对目标真实高度的有效估计。     

直达波和杂波干扰下目标阴影逆合成孔径成像

对直达波和杂波条件下的阴影逆合成孔径雷达(SISAR)目标成像问题进行了研究。分析了直达波和杂波对侧影像畸变和运动补偿的影响,提出了一种新的直达波和杂波干扰下目标SI-SAR成像方法,即将回波信号与参考信号进行模拟对消,并利用目标回波的频谱特性剔除残留直达波,再对目标运动参数进行粗估计,采用粗搜索和精搜索2步实施准确的运动补偿,最终获得失真度较小的目标侧影像。仿真实验验证了算法的有效性。     

关于线性时变系统的逆

本文讨论单输入单输出线性时变系统的逆系统问题，给出了可逆性的充要条件和两种降阶逆系统的计算方法，并用例子说明了这些方法。