一种锥比率数据包络分析模型及有关结论

本文研究一种锥比率数据包络分析模型,它既能反映各项输入或输出的相对重要性和对某些决策单元的偏好,又可单纯地评价决策单元间的相对技术有效性。本文着重讨论这一模型的DEA有效性与多目标规划非支配解的关系以及有效决策单元的存在性等问题,论证了有关结论。     

4点弯曲载荷作用下残余应力与弹性模量比对涂层/基体材料界面能量释放率的影响

采用有限元计算方法研究了在4点弯曲载荷作用下,残余应力、涂层与基体的弹性模量比(简称弹性模量比)对涂层/基体材料界面能量释放率及其相角的影响。结果表明:能量释放率随着残余拉应力、弹性模量比的增大而增大;能量释放率中的相角也随着残余拉应力的增大而增大,但并不敏感,其随着弹性模量比的增大而减小。研究结果可为评价涂层/基体材料界面结合性能提供理论依据,有助于深化对涂层/基体材料界面结合性能的认识。     

战斗机末端机动的非线性模型预测控制规避策略

利用非线性模型预测控制的思想建立了战斗机末端规避导弹的机动策略求解方法。根据导弹与战机的空战态势,建立了导弹与战机的相对运动微分方程;将导弹的导引律引入到导弹运动模型中,与飞机模型一起构建了系统预测模型,并对飞机和导弹的运动约束进行了分析。通过对导弹结构限制和战术特性的分析,给出了飞机机动规避导弹的性能指标,进而建立了机动规避导弹的最优控制模型。利用高斯伪谱法对模型进行求解,采用滚动优化策略实现了对机动规避策略的闭环求解。针对导弹气动参数和导航比未知以及相对测量量具有噪声的问题,利用极大似然法对导弹的气动参数和导航比进行估计,实现了对系统预测模型的反馈校正。仿真结果表明,此方法能够实现对导弹的机动规避。     

On the application and extension of system signatures in engineering reliability

Following a review of the basic ideas in structural reliability, including signature‐based representation and preservation theorems for systems whose components have independent and identically distributed (i.i.d.) lifetimes, extensions that apply to the comparison of coherent systems of different sizes, and stochastic mixtures of them, are obtained. It is then shown that these results may be extended to vectors of exchangeable random lifetimes. In particular, for arbitrary systems of sizes m < n with exchangeable component lifetimes, it is shown that the distribution of an m‐component system's lifetime can be written as a mixture of the distributions of k‐out‐of‐n systems. When the system has n components, the vector of coefficients in this mixture representation is precisely the signature of the system defined in Samaniego, IEEE Trans Reliabil R–34 (1985) 69–72. These mixture representations are then used to obtain new stochastic ordering properties for coherent or mixed systems of different sizes. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Effect of particle gradation of aluminum on the explosion field pressure and temperature of RDX-based explosives in vacuum and air atmosphere

To optimize the energy output and improve the energy utilization efficiency of an aluminized explosive, an explosion device was developed and used to investigate the detonation pressure and temperature of R1 (Al6) aluminum powder and the aluminum powder particle gradation of R2 (Al6+Al13), R3 (Al6+Al24) and R4 (Al6+Al flake) in a confined space. By using gas chromatography, quantitative analysis and calculations were carried out to analyze the gaseous detonation products. Finally, the reaction ratios of the aluminum powder and the explosion reaction equations were calculated. The results show that in a confined space, the quasi-static pressures and equilibrium temperature of the aluminum powder in air are higher than in vacuum. In vacuum, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R3>R4>R2 and R3>R4>R1>R2, respectively. In air, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R2>R4>R3 and R1>R4>R2>R3, respectively. R4 (Al6+Al flake) and R3 (Al6+Al24) have relatively higher temperatures after detonation, which shows that the particle gradation method can enhance the reaction energy output of aluminum during the initial reaction stage of the explosion and increase the reaction ratio by 10.6% and 8.0%, respectively. In air, the reaction ratio of Al6 aluminum powder can reach as high as 78.16%, and the reaction ratio is slightly reduced after particle gradation. Finally, the reaction equations of the explosives in vacuum and in air were calculated by quantitative analysis of the explosion products, which provides a powerful basis for the study of RDX-based explosive reactions.     

高空平台通信系统中多波束天线辐射特性对系统性能的影响

高空平台通信系统中将采用多波束天线提供蜂窝覆盖，来提高系统容量。本文分析等波束宽度和等波束面积两种类型多波束天线辐射特性以及它们的几何模型，推导了载干比计算公式，通过仿真分析不同参数配置条件下多波束天线辐射特性对系统载干比性能的影响。研究表明等波束面积多波束天线比等波束宽度多波束天线具有更好的载干比分布特性。本文得出的结论对HAP通信系统规划具有重要的指导意义。     

高超声速变形飞行器翼面变形模式分析

为提高高超声速翼身组合式飞行器的射程,研究了采用不同翼面变形模式时,飞行器在马赫数3~8内的气动特性和翼面效率。针对典型的轴对称翼身组合式外形,采用Navier-Stokes方程进行数值模拟,对伸缩、变后掠和二维折叠三种变形模式下的外形在超声速及高超声速来流条件下进行模拟,并对升阻比、翼面单位面积升阻比和操稳特性进行分析。结果表明:在超声速及高超声速范围内,变后掠变形模式在宽速域内升阻比提高明显,同时具备优良的翼面效率及操稳特性,其在马赫数3~8范围内具有最优的综合性能。研究成果能对高超声速翼身组合式变形飞行器布局设计提供参考,具有一定的指导意义。     

基于辐照度标准传递的辐亮度校准系统

介绍了一种新型辐亮度校准系统,通过溯源至国家辐照度标准,构建了军用光辐射校准平台。对系统的测量不确定度分析表明,该系统可以满足装备计量保障对测试不确定度比的通用要求,适用于装备专用检测设备的辐亮度校准。     

Monitoring censored lifetime data with a weighted‐likelihood scheme

Lifetime experiments are common in many research areas and industrial applications. Recently, process monitoring for lifetime observations has received increasing attention. However, some existing methods are inadequate as neither their in control (IC) nor out of control (OC) performance is satisfactory. In addition, the challenges associated with designing robust and flexible control schemes have yet to be fully addressed. To overcome these limitations, this article utilizes a newly developed weighted likelihood ratio test, and proposes a novel monitoring strategy that automatically combines the likelihood of past samples with the exponential weighted sum average scheme. The proposed Censored Observation‐based Weighted‐Likelihood (COWL) control chart gives desirable IC and OC performances and is robust under various scenarios. In addition, a self‐starting control chart is introduced to cope with the problem of insufficient reference samples. Our simulation shows a stronger power in detecting changes in the censored lifetime data using our scheme than using other alternatives. A real industrial example based on the breaking strength of carbon fiber also demonstrates the effectiveness of the proposed method. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 631–646, 2017     

某型柴油机进气道通流特性试验研究

分析了某型柴油机气缸盖进气道流量系数和涡流比随气阀升程的变化规律,以及进气道前后的压差对流量系数和涡流比的影响.试验结果表明,该型柴油机进气系统在低负荷时可以实现较大的涡流比,从而可以改善柴油机低负荷性能.