玻璃瓶动态图像检测运动模拟平台

动态图像检测中,如何在指定位置快速而准确地捕捉到运动物体的图像是最基本的环节。试验验证图像检测装置的成像特性,成为动态图像检测研究的重要内容之一。以变频器控制电动机为核心,通过变频器内部参数编程和外部简单的辅助控制电路,构建了运动平稳、速度可调、具有自动保护功能的模拟平台。该平台适于动态图像检测中普通运动物体的快速模拟,已成功地用于玻璃瓶动态图像装置中,达到了预期目的。     

联合作战系统效能评估

采用面向过程的系统分析方法建立了一个对联合作战系统效能比较精确的量化评估模型.模型以某个参考系统为标准,先作层次分析,然后通过模糊对比,把各层次中难以具体量化因素进行了量化,再通过判断矩阵得出各自权重,最后线性加权便可以得到总的系统相对于标准系统的优劣程度,是一种面向过程的系统分析.该方法适用面广,对复杂系统效能评估工作有一定指导意义,具有广阔的应用前景.     

低频UWBSAR辐射校准模型

低频超宽带合成孔径雷达(Ultra Wide Band Synthetic Aperture Radar,UWBSAR)的辐射校准是系统研制和应用过程中必须面对的课题。低频UWBSAR的特点使得常规SAR辐射校准技术不再适用。充分考虑校准参数随频率和方位角的变化,给出适合该系统的辐射校准方法,得到低频UWBSAR图像辐射校准模型。利用该模型,对系统辐射校准误差进行了分析。     

非局部弹性杆固有频率的Ritz法求解

采用Ritz法求解了非局部弹性直杆的固有频率问题。非局部弹性理论与经典弹性理论相对应,区别在于非局部理论中,一点的应力与该点以及其周围区域的应变都有关,并采用核函数来表征这种相关性。基于Eringen提出的非局部弹性模型,针对三种给定核函数,用Ritz法进行了直杆的动力学分析。并针对两种边界条件给出直杆的固有频率,与其它方法比较,该方法具有可以针对多种核函数求解,精度可控,易于编程等优点。     

转向机动条件下利用拖船航迹的拖线阵阵形估计

针对水动力模型(water-pulley模型)适用范围有限的问题,提出一种对拖船航迹进行平滑得到拖线阵声阵段运动轨迹,进而实现阵形估计的方法。通过分析缆的稳态振荡响应特性,近似认为声阵段上各点沿同一轨迹运动;设计平滑窗将拖船回转机动航迹平滑为声阵段航迹,并将其拓展应用于拖船转向机动的情况;利用平滑窗的一部分对距离拖船不足平滑窗宽度的航迹部分进行平滑得到当前拖缆段阵形,从而实现转向机动过程中全阵阵形的实时估计。仿真结果表明:若拖线阵由间隔为5 m的81个阵元构成,所提出的方法与朴素water-pulley模型相比可以使转向机动过程中的平均阵增益提高约0.8 dB,平均方位估计偏差减小约4.7°。利用仿真结果分析算法的输入敏感性,对阵形估计方法进行简化使其更易于工程实现,海试数据验证表明简化的方法可行、有效。     

Experimental study on the detonation process of a pulse detonation engine with ionized seeds

An experimental platform of a pulse detonation engine (PDE) was established to study the effect of different K₂CO₃ ionized seed mass contents on the detonation process. The pressure and ion concentration were detected in the detonation process of the PDE with different contents of ionized seeds. The initiation process of the PDE at different ignition frequencies was studied. The results show that the gas conductivity in the detonation process increased by adding ionized seeds to the PDE tube, and the conductivity increased with the increase in ionized seed mass content. With the increase in ionized seed mass content, the range of the conductivity decreased. The PDE was successfully ignited and formed a stable detonation wave at ignition frequencies of 5 Hz and 10 Hz, and the peak pressure of the stable detonation with the ignition frequency of 5 Hz was 17% higher than that with an ignition frequency of 10 Hz. The detonation wave intensity was weakened and degenerated to a shock wave that propagated in the tube without the fuel filled at the ignition frequency of 20 Hz.     

Sensor radiation interception risk control in target tracking

This paper is mainly on the problem of radiation interception risk control in sensor network for target tracking. Firstly, the sensor radiation interception risk is defined as the product of the interception probability and the cost caused by the interception. Secondly, the radiation interception probability model and cost model are established, based on which the calculation method of interception risk can be obtained. Thirdly, a sensor scheduling model of radiation risk control is established, taking the minimum interception risk as the objective function. Then the Hungarian algorithm is proposed to obtain sensor scheduling scheme. Finally, simulation experiments are mad to prove the effectiveness of the methods proposed in this paper, which shows that compared with the sensor radiation interception probability control method, the interception risk control method can keep the sensor scheduling scheme in low risk as well as protect sensors of importance in the sensor network.     

内置频率对Duffing振子微弱二进制相移键控信号盲检测影响

采用Duffing振子实现对微弱二进制相移键控（Binary Phase Shift Keying, BPSK）信号的盲检测时,Duffing系统输出的周期态和混沌态转换之间存在过渡带。针对这一问题,推导出过渡带时长和Duffing系统内置频率之间的关系表达式;指出内置频率越高,过渡带时间越短;仿真实验给出时间频率响应曲线。内置频率的提高,会降低系统检测微弱信号的灵敏度。针对这一问题,推导出周期态下Duffing系统输出幅度作为因变量、内置频率作为自变量的表达式;仿真实验给出幅频响应曲线。针对微弱BPSK信号盲检测,建立变尺度方法和检测阵列相结合的基于S变换提取Duffing系统输出幅度包络的微弱BPSK信号盲检测模型,仿真实验验证了模型方法的有效性。     

机载航电系统射频隐身性能多域联合评估方法

针对机载航电系统自身辐射源特性,提出一种不依赖敌方探测设备的机载航电系统射频隐身性能评估方法。分析机载航电系统设备在极化域、波形域、能量域中影响射频隐身性能的因素,构建极化域、能量域、波形域射频隐身指标,打破常规的"辐射-接收"模型的隐身性能评估方法,建立基于机载航电系统自身辐射信号工作状态和工作参数的射频隐身定量评估方法。对机载雷达系统进行仿真评估,结果表明,该评估方法能正确反映机载雷达系统的射频隐身性能。     

Adjacency‐based local top‐down search method for finding maximal efficient faces in multiple objective linear programming

It is well‐known that the efficient set of a multiobjective linear programming (MOLP) problem can be represented as a union of the maximal efficient faces of the feasible region. In this paper, we propose a method for finding all maximal efficient faces for an MOLP. The new method is based on a condition that all efficient vertices (short for the efficient extreme points and rays) for the MOLP have been found and it relies on the adjacency, affine independence and convexity results of efficient sets. The method uses a local top‐down search strategy to determine maximal efficient faces incident to every efficient vertex for finding maximal efficient faces of an MOLP problem. To our knowledge, the proposed method is the first top‐down search method that uses the adjacency property of the efficient set to find all maximal efficient faces. We discuss this and other advantages and disadvantages of the algorithm. We also discuss some computational experience we have had with our computer code for implementing the algorithm. This computational experience involved solving several MOLP problems with the code.