探空火箭级间段的CAD系统

本文在CADKEY绘图软件包的支持下,开发了加筋圆柱结构CAD系统—Hcadx.此系统通过菜单引导用户的操作,可用经验公式或解析法作轴压稳定分析,用罚函数法优化参数,可以在不退出Hcadx的情况下启动CADKEY,自动绘制设计草图。此草图经过适当地编辑、修改、便可成为工程中能接受的工作图纸。     

无奇点三维攻击时间控制滑模导引律

为研究导弹在视场角约束下的三维攻击时间控制问题,提出一种三维非线性滑模导引律。利用攻击时间误差设计滑模面,推导出三维形式的俯仰和偏航加速度指令;通过对所设计制导律进行简单修正,解决了零初始前置角引起的奇点问题;从数学上证明了该导引律的稳定性和收敛性,讨论了导引律相关参数的取值范围,分析了与纯比例导引法、解耦三维导引律之间的关系。仿真结果表明,所设计导引律能够在视场角约束条件下有效实现攻击时间增大或减小的控制;俯仰和偏航平面的耦合程度越强,该导引律控制能耗小的优势越为明显。     

Effect of organo-modified montmorillonite nanoclay on mechanical,thermal and ablation behavior of carbon fiber/phenolic resin composites

The mechanical, thermal and ablation properties of carbon phenolic (C-Ph) composites (Type-I) rein-forced with different weight percentages of organo-modified montmorillonite (o-MMT) nanoclay have been studied experimentally. Ball milling was used to disperse different weight (wt) percentages (0, 1,2,4,6 wt.％) of nanoclay into phenolic resin. Viscosity changes to resin due to nanoclay was studied. On the other hand, nanoclay added phenolic matrix composites (Type-II) were prepared to study the dispersion of nanoclay in phenolic matrix by small angle X-ray scattering and thermal stability changes to the matrix by thermogravimetric analyser (TGA). This data was used to understand the mechanical, thermal and ablation properties of Type-I composites. Inter laminar shear strength (ILSS), flexural strength and flexural modulus of Type I composites increased by about 29％, 12％and 7％respectively at 2 wt.％ addition of nanoclay beyond which these properties decreased. This was attributed to reduced fiber volume fraction (％Vf) of Type-I composites due to nanoclay addition at such high loadings. Mass ablation rate of Type-I composites was evaluated using oxy acetylene torch test at low heat flux (125 W/cm2) and high heat flux levels (500 W/cm2). Mass ablation rates have increased at both flux levels marginally up to 2 wt.％ addition of nanoclay beyond which it has increased significantly. This is in contrast to increased thermal stability observed for Type-I and Type-Ⅱ composites up to 2 wt.％addition of nanoclay. Increased ablation rates due to nanoclay addition was attributed to higher insulation effi-ciency of nanolcay, which accumulates more heat energy in limited area behind the ablation front and self-propagating ablation mechanisms triggered by thermal decomposition of organic part of nanoclay.     

润滑脂氧化安定性的伏安法测定

应用伏安法测定了润滑脂中的抗氧剂含量,研究了润滑脂的氧化安定性和储存安定性与抗氧剂含量的关系。发现润滑脂在储存过程中抗氧剂的消耗是有规律的,开始阶段抗氧剂消耗较慢,一定时间后抗氧剂消耗突然加快,这一结果为指导润滑脂储存提供了科学依据。     

维和任务区当地译员的重要作用与素质要求

维和行动中的当地译员是一个特殊群体,在维和任务中具有重要作用。当地译员必须具备保密性、中立性、服务性等基本素质。因此,最大限度地调动当地译员的工作热情、提高其职业素质、是保证维和行动顺利完成的重要环节。     

Nuclear weapons,existential threats,and the stability–instability paradox

Recent scholarship has largely ignored systematic differences in the existential threats that nuclear-weapon possessors pose to other states. This study theorizes that the capacity to pose existential threats shapes nuclear-armed states’ willingness to use military force against one another. We explore three hypotheses regarding how nuclear-based existential threats can deter conflict or encourage it, including under the conditions proposed by the stability–instability paradox. We rely on a statistical analysis of nuclear-armed dyads from 1950 to 2001 and employ the Nuclear Annihilation Threat (NAT) Index to capture variation in the existential threats nuclear-armed states pose to one another. We find that being able to pose an existential threat to another state emboldens potential initiators to use military force but does not deter attacks. The emboldening effects are particularly strong under the hypothesized conditions of the stability–instability paradox. Our study provides unique contributions to ongoing debates over the political effects of nuclear weapons.     

基于北斗、短波的高精度时钟系统研究与设计

介绍了北斗、短波授时技术;对高稳恒温晶振及其频率特性进行分析的基础上,设计了一种基于北斗卫星、短波无线电授时的高精度时钟系统;该系统通过利用北斗接收处理模块、短波授时接收模块得到的秒脉冲信号、时间信息,经过延迟修正处理、脉冲滤波、脉冲补偿、脉冲统计得到标准的秒脉冲信号,实现对恒温晶振频率的校准,获得一个短期及长期频率稳定度都比较优良的时间频率标准,同时利用校频后恒温晶振分频出的1pps信号对时间芯片进行校准,对外输出高精度时间信息;对恒温晶振校频系统的基本工作原理及部分模块电路图进行了说明,试验结果表明,在时间不长于1h内,频率准确度优于1×10-10;该系统实用方便的方法达到了将晶体振荡器校准到较高指标的目的。     

Rebels of the frontier: origins,organization, and recruitment of the Pakistani Taliban

The Pakistani Taliban, factionalized into some 40 groups, form a decentralized insurgent movement, often characterized by infighting, divergent motivations, and a shifting web of alliances. The Pakistani Taliban remain little understood because most scholars have avoided a serious treatment of the insurgent movement and instead focused on analyzing the geopolitics of the region and Pakistan's ‘double game’. This article seeks to fill this gap by dissecting the movement through selected theories of organization and mobilization. First, I explain the various dimensions of the conflict and the origins of the insurgency. Next, I discuss the Pakistani Taliban's political organization, categorizing it as composed of various warlord regimes. I further list the Taliban's component groups and numerical strength and chart the leadership structure. Lastly, I analyze insurgent recruitment strategies, accounting for the role of selective incentives, coercion, and genuine grievances.     

India's Pursuit Of Ballistic Missile Defense

This article analyzes India's efforts to deploy a Ballistic Missile Program (BMD). The article has three objectives. First, it argues that scientific-bureaucratic factors and India's incapacity to deter Pakistan's use of terrorist proxies have driven its quest for BMD. Second, the article also evaluates the current state of India's two-tiered missile defense shield. In spite of various claims on the part of India's defense science establishment, the paper estimates that India still lacks a deployable BMD system and is still far from developing an effective strategy of deterrence-through-denial. Third, the article analyzes the implications of the development of India's BMD system for nuclear stability in South Asia. The article shows how India's BMD capacities, however limited, have indirectly exacerbated the security concerns of India's regional rival, Pakistan.     

基于ANSYS的油罐拱顶稳定性分析

针对加肋拱顶稳定性十分复杂的问题,基于ANSYS建立了加肋拱顶油罐的三维有限元模型,对加肋拱顶的结构稳定性进行了数值模拟。对加肋拱顶在外压作用下的线性与非线性临界屈曲载荷进行了对比分析,利用弧长法获得了拱顶在加肋情况下径向、环向、轴向的载荷-位移曲线。结果表明:数值模拟的加肋拱顶屈曲方向和屈曲区域与实际失稳结果相一致,可以为加肋拱顶设计和稳定性分析提供一定参考。