10.6μm 双路 NH2D 斯塔克盒稳频CO2 激光拍频系统研究

在无恒温设备,无特殊防震措施,激光器采用泵浦循环水冷却,稳频环路采用常温热释电探测器的条件下,我们成功地建立了１０．６μｍ双路ＮＨ_２Ｄ斯塔克盒稳频ＣＯ_２激光拍频系统。文中重点对稳频系统的频率稳定性的拍频测试进行实验研究,并对关键技术进行了讨论。用拍频法及阿仑方差评价的频率稳定性是：取样时间为１０_ｓ、１ｓ的频率稳定性优于４×１０~（－１０）;取样时间为１００ｍｓ、１０ｍｓ、１ｍｓ的频率稳定性优于１．７×１０~（－９）。     

弹性压杆稳定性的一般表达式

本文推导出等截面弹性压杆稳定性的一般表达式。17种在各种边界条件下的弹性压杆的临界压力计算公式均是它的特殊情况。     

标枪训练中对影响标枪飞行因素的分析

运用空气动力学原理,对标枪的纵轴旋转与压强阻力、偏向力、上升力及稳定性的关系进行分析研究,以更好地指导运动训练的实践。     

具有模糊偏好认知矩阵的超对策稳定性分析

针对一类具有模糊偏好认知矩阵的超对策问题,给出了具体的稳定性分析方法。基于相对模糊距离的概念和模糊有序加权平均(FOWA)算子提出了三角模糊互补判断矩阵的一种排序方法。由此方法得到局中人的结局偏好认知向量,进而给出了一阶超对策的稳定性分析过程。最后,以实际冲突为例说明这一方法。     

一类具有变时滞系统的α稳定性

本文对线性变量滞系统进行讨论,通过利用Lyapunov函数的方法和线性矩阵不等式,给出了该系统的一个充分条件。并对线性控制系统稳定性的应用有一定的影响。     

舰船在斜浪中的稳性研究

应用累次近似法提出了一种斜浪中复原力臂的计算方法,对４型舰船作了大量的计算,其中包括波船相对位置、浪向角、波陡的变化对稳性的影响,最后得出复原力臂随之变化的规律．     

加农炮身管纵向振动的固有特征分析

建立了加农炮身管纵向振动的力学模型,推导出了频率方程,给出了固有频率的数值计算结果,描绘了加农炮身管纵向振动的固有振型,对影响加农炮身管纵向振动固有特征的各种因素进行了分析。     

发射药的分解机理及其安定性研究

在研究发射药中硝酸酯的分解机理及其与发射药安定性关系的基础上,分析了热分解,水解和自动催化作用对发射药安定性的影响,以色谱法和粘度法等实验手段探索发射药安定性的变化规律,通过不同温度下发射药老化过程的动力学研究,提出了确定发射药安全使用寿命的可靠方法。     

大口径机枪弹性枪架稳定性分析的冲量法

大口径机枪在弹性枪架上射击稳定性的问题,是影响连发射击精度的一个重要问题,按传统方法以最大后座力或自动机后座到位的瞬间作用校核稳定性,其结果与实际射击现象不符。本文在分析大量实验现象后,提出稳定性分析计算中的冲量法,并以12.7mm 大口径机枪为例进行检验,结果与实验现象相符.     

Effect of energy content of the nitraminic plastic bonded explosives on their performance and sensitivity characteristics

Information about the forty nine nitraminic plastic bonded explosives (PBXs) and different nitramines were collected. Fillers of these PBXs are nitramines 1,3,5-trinitro-1,3,5-triazinane (RDX) and β-1,3,5,7-tetranitro-1,3,5-tetrazocane (β-HMX), cis-1,3,4,6-tetranitro-octahydroimidazo-[4,5-d]imidazole (bicyclo-HMX, BCHMX) and ε-2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (ε-HNIW, CL-20) which are bonded by polyfluoro-elastomers, polydimethyl-siloxane, poly-glycidyl azide, polyisobutylene, polystyrene-butadiene, poly-acrylonitrile-butadiene and hydroxyl-terminated polybutadiene in addition to a melt cast compositions based on 2,4,6-trinitrotoluene. For thirty two of these PBXs the relationships are specified and analyzed between heats of their combustion and relative explosive strengths; by means of these relationships it might be possible to estimate, which groupings in the macromolecule of binder could be liable to their primary fission in the PBXs initiation. Similarly, for forty two of these explosives, the relationships are described and analyzed between their enthalpies of formation and impact sensitivities; here is especially attention paid to PBXs filled by BCHMX. Specific rate constants from Vacuum Stability Test (VST) of four nitramines and twenty PBXs are introduced into relationships with their enthalpies of formation. Regarding to all the mentioned cases, increasing of energy content of the studied explosives leads to increase of the relative explosive strength or initiation reactivity, respectively. Exception with the opposite trend, the outputs of VST are for BCHMX, where in PBXs are matrices with the esteric plasticizers or the energetic poly-glycidyl azide. Admixture of RDX or HMX, respectively, into the BCHX PBXs gives ternary PBXs whose thermal stability, in the sense of applied VST, is higher comparing to the original binary explosives.