一种锥比率数据包络分析模型及有关结论

本文研究一种锥比率数据包络分析模型,它既能反映各项输入或输出的相对重要性和对某些决策单元的偏好,又可单纯地评价决策单元间的相对技术有效性。本文着重讨论这一模型的DEA有效性与多目标规划非支配解的关系以及有效决策单元的存在性等问题,论证了有关结论。     

基于变步长LMS的谐波电流检测方法的研究

能否快速准确检测出三相电力系统中谐波电流是决定有源滤波器整体滤波性能的关键.基于瞬时无功功率的谐波电流检测理论,提出了一种改进的自适应滤波器谐波检测算法,通过构造步长因子与误差信号的非线性函数,调整步长参数,使权向量达到最优,在确保稳态误差的前提下,提高了系统的收敛速度.仿真实验验证了该算法的正确性和有效性.     

4点弯曲载荷作用下残余应力与弹性模量比对涂层/基体材料界面能量释放率的影响

采用有限元计算方法研究了在4点弯曲载荷作用下,残余应力、涂层与基体的弹性模量比(简称弹性模量比)对涂层/基体材料界面能量释放率及其相角的影响。结果表明:能量释放率随着残余拉应力、弹性模量比的增大而增大;能量释放率中的相角也随着残余拉应力的增大而增大,但并不敏感,其随着弹性模量比的增大而减小。研究结果可为评价涂层/基体材料界面结合性能提供理论依据,有助于深化对涂层/基体材料界面结合性能的认识。     

低熔点石蜡微胶囊的中试及热性能

为寻找能适应环境温度的相变材料,选择低熔点石蜡作为芯材,制备微胶囊并进行中试生产。对同一样品进行了26次DSC热循环测试和TGA热失重测试,结果表明：中试产品的相变温度始终保持在25~60℃,相变极值和相变热焓均未发生明显变化,分别为42℃和72 J/g;产品能耐受150℃以内的高温而不分解,且在相变温度范围内基本无失重。证明低熔点石蜡微胶囊能在环境温度内发挥调节作用,同时具备较长的热循环寿命和较好的热稳定性,是一种具备良好应用前景的相变材料。     

On the application and extension of system signatures in engineering reliability

Following a review of the basic ideas in structural reliability, including signature‐based representation and preservation theorems for systems whose components have independent and identically distributed (i.i.d.) lifetimes, extensions that apply to the comparison of coherent systems of different sizes, and stochastic mixtures of them, are obtained. It is then shown that these results may be extended to vectors of exchangeable random lifetimes. In particular, for arbitrary systems of sizes m < n with exchangeable component lifetimes, it is shown that the distribution of an m‐component system's lifetime can be written as a mixture of the distributions of k‐out‐of‐n systems. When the system has n components, the vector of coefficients in this mixture representation is precisely the signature of the system defined in Samaniego, IEEE Trans Reliabil R–34 (1985) 69–72. These mixture representations are then used to obtain new stochastic ordering properties for coherent or mixed systems of different sizes. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Effect of particle gradation of aluminum on the explosion field pressure and temperature of RDX-based explosives in vacuum and air atmosphere

To optimize the energy output and improve the energy utilization efficiency of an aluminized explosive, an explosion device was developed and used to investigate the detonation pressure and temperature of R1 (Al6) aluminum powder and the aluminum powder particle gradation of R2 (Al6+Al13), R3 (Al6+Al24) and R4 (Al6+Al flake) in a confined space. By using gas chromatography, quantitative analysis and calculations were carried out to analyze the gaseous detonation products. Finally, the reaction ratios of the aluminum powder and the explosion reaction equations were calculated. The results show that in a confined space, the quasi-static pressures and equilibrium temperature of the aluminum powder in air are higher than in vacuum. In vacuum, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R3>R4>R2 and R3>R4>R1>R2, respectively. In air, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R2>R4>R3 and R1>R4>R2>R3, respectively. R4 (Al6+Al flake) and R3 (Al6+Al24) have relatively higher temperatures after detonation, which shows that the particle gradation method can enhance the reaction energy output of aluminum during the initial reaction stage of the explosion and increase the reaction ratio by 10.6% and 8.0%, respectively. In air, the reaction ratio of Al6 aluminum powder can reach as high as 78.16%, and the reaction ratio is slightly reduced after particle gradation. Finally, the reaction equations of the explosives in vacuum and in air were calculated by quantitative analysis of the explosion products, which provides a powerful basis for the study of RDX-based explosive reactions.     

高空平台通信系统中多波束天线辐射特性对系统性能的影响

高空平台通信系统中将采用多波束天线提供蜂窝覆盖，来提高系统容量。本文分析等波束宽度和等波束面积两种类型多波束天线辐射特性以及它们的几何模型，推导了载干比计算公式，通过仿真分析不同参数配置条件下多波束天线辐射特性对系统载干比性能的影响。研究表明等波束面积多波束天线比等波束宽度多波束天线具有更好的载干比分布特性。本文得出的结论对HAP通信系统规划具有重要的指导意义。     

高超声速变形飞行器翼面变形模式分析

为提高高超声速翼身组合式飞行器的射程,研究了采用不同翼面变形模式时,飞行器在马赫数3~8内的气动特性和翼面效率。针对典型的轴对称翼身组合式外形,采用Navier-Stokes方程进行数值模拟,对伸缩、变后掠和二维折叠三种变形模式下的外形在超声速及高超声速来流条件下进行模拟,并对升阻比、翼面单位面积升阻比和操稳特性进行分析。结果表明:在超声速及高超声速范围内,变后掠变形模式在宽速域内升阻比提高明显,同时具备优良的翼面效率及操稳特性,其在马赫数3~8范围内具有最优的综合性能。研究成果能对高超声速翼身组合式变形飞行器布局设计提供参考,具有一定的指导意义。     

基于0.18um CMOS 工艺的GPS/北斗双模可重构接收机射频前端

设计了一种GPS/北斗双模可重构接收机射频前端,支持GPS L1和北斗B1两种工作模式,较单模接收机在可用性、连续性和完好性等方面具有优势。此射频前端采用低中频架构,混频器、中频滤波器等关键模块可重构,硬件复用的同时减少了芯片面积、降低了系统功耗。测试结果表明,在1.8V电源电压下,电压增益为103dB,功耗37.8mW,GPS L1和北斗B1波段噪声系数均小于3.2dB,芯片面积为2.263×2.098mm₂。     

基于辐照度标准传递的辐亮度校准系统

介绍了一种新型辐亮度校准系统,通过溯源至国家辐照度标准,构建了军用光辐射校准平台。对系统的测量不确定度分析表明,该系统可以满足装备计量保障对测试不确定度比的通用要求,适用于装备专用检测设备的辐亮度校准。