Recent advances in the synthesis and energetic properties of potassium-based potential green primary explosives

Primary explosives are utilized as a reliable initiator for secondary explosives in an extensive range of military and civilian operations. Heavy–metal–based primary explosives are moderate performing, more sensitive, and environmentally hazardous, posing a direct and indirect threat to health and safety. Therefore, heavy–metal–based primaries have been replaced by environment-friendly metal-based primary explosives, such as potassium complexes. This review presents not only a summary of the current progress of new-generation potassium-based primary explosives and their methods of preparation, energetic properties, and applications, but also a further comparison with traditional primary explosives. In addition, this work discusses the necessity of heavy metal–free primary explosives and the major challenges faced in replacing traditional primary explosives.     

新型夜瞄复合荧光材料在步兵轻武器中的应用研究

采用自制的复合荧光粉体和化学载体成分,研制出一种步兵轻武器新型夜瞄复合荧光材料.试验研究和实际使用结果表明,研制的新材料发光时间长、亮度高,具有良好的耐温、耐腐蚀性能,不受轻武器的日常使用和维护影响,可满足步兵轻武器夜间瞄准需求.     

树脂浸渍裂解对气相硅反应渗透C/SiC的影响

粘胶基碳纤维毡经过CVD工艺进行沉积碳增密处理后,采用酚醛树脂浸渍—裂解对C/C素坯的密度进行调节,通过气相硅渗透反应工艺制备了C/SiC复合材料。研究了树脂浸渍—裂解对C/C素坯密度和气孔率的影响规律,分析了树脂裂解碳对C/SiC显微形貌和力学性能的影响。结果表明:随着树脂浸渍—裂解循环次数的增加,素坯密度增加,孔隙率降低;裂解碳含量为27wt%时,C/SiC复合材料的强度和模量达到最大,分别为231MPa和209GPa。通过控制裂解碳含量,可以实现对C/SiC复合材料力学性能和微观结构的裁剪。     

无箔二极管中引导磁场对电子回流的影响

无箔二极管中电子回流是造成绝缘子表面闪络的重要因素 ,用Maxwell方程和电子运动方程定性分析了电子束回流的可能性 ,采用PIC方法模拟了无箔二极管中电子束回流的物理过程 ,由此提出了对引导磁场和阴阳极结构进行优化设计的建议。     

磁悬挂天平的变结构控制

鉴于磁悬挂天平系统强烈的非线性特性及存在的多种不确定性 ,针对非匹配不确定性情况设计了变结构控制器。根据对悬浮时模型受力图的分析及其模型两端电磁力、电流和电压的平衡关系 ,并以Y轴方向受力为例 ,讨论了磁悬挂天平的非线性变结构设计过程。该设计的目的是使镇定误差趋近于 0 ,其设计步骤包括期望性能到期望力的传递、满足滑动模态可达条件的控制力到控制电压的传递、控制电压的求解。同时对设计的结果进行了仿真分析 ,仿真结果表明磁悬挂天平的变结构控制系统具有良好的动态性能     

Effect of fusion welding processes on tensile properties of armor grade,high thickness,non-heat treatable aluminium alloy joints

AA5059 is one of the high strength armor grade aluminium alloy that finds its applications in the military vehicles due to the higher resistance against the armor piercing (AP) threats. This study aimed at finding the best suitable process among the fusion welding processes such as gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) by evaluating the tensile properties of AA5059 aluminium alloy joints. The fracture path was identified by mapping the low hardness distribution profile (LHDP) across the weld cross section under tensile loading. Optical and scanning electron microscopies were used to characterize the microstructural features of the welded joints at various zones. It is evident from the results that GTAW joints showed superior tensile properties compared to GMAW joints and this is primarily owing to the presence of finer grains in the weld metal zone (WMZ) and narrow heat-affected zone (HAZ). The lower heat input associated with the GTAW process effectively reduced the size of the WMZ and HAZ compared to GMAW process. Lower heat input of GTAW process results in faster cooling rate which hinders the grain growth and reduces the evaporation of magnesium in weld metal compared to GMAW joints. The fracture surface of GTAW joint consists of more dimples than GMAW joints which is an indication that the GTAW joint possess improved ductility than GMAW joint.     

复铜与铜导线的高频电磁性能比较

本文用有限元法计算复铜导线和铜导线内部的电磁场分布,比较两种导线的电磁场及其传输参数,最后得出结论——在高频电路中复铜导线可以取代铜导线.     

熔融织构（MTG）的YBa2Cu3O7-δ块材的交流磁化率研究

本文通过控制温度梯度和降温速率等烧结工艺制备了熔融织构的YBa_2Cu_3O_(7-8)块材,经结构分析和交流磁化率测量,发现样品晶粒择优取向,样品开始出现抗磁信号的温度为92K,交流磁化率虚部只存在一个反映晶粒内部损耗的小尖峰。施加直流场0-600高斯,小尖峰向低温移动,峰的半宽度略有展宽,峰的高度增强。用磁滞损耗解释了上述结果。     

磁梯度张量的旋转计算方法

为了获得磁梯度张量数据,提出旋转计算磁梯度张量的方法。使倾斜放置的磁梯度计绕竖直轴线转动,利用测得的空间磁梯度数据计算得到磁梯度张量。以磁梯度张量的理论值作为参考,选取一组较优的转动角、倾角和基线长度等模型参数,分析磁力仪三轴指向误差对磁梯度张量计算结果的影响。数值仿真结果表明:该旋转合成方法能够有效获取磁张量信息,合成计算值与理论值之间的差别较小。     

EMS型低速磁浮列车U型电磁铁设计方法研究

针对EMS型低速磁浮列车的U型电磁铁,研究其气隙磁密及结构参数的设计方法.气隙磁密应选为铁芯材料的磁导率下降到其最大值的90％时所对应的磁密.结构参数包括极长、极高、窗宽、窗高和轭厚,极长影响牵引效率及过弯能力,极宽影响承载能力和导向刚度,窗宽和窗高影响重量,但随轨宽而定,轭厚按磁轭与磁极的磁密相等的原则来选取.