先进上面级数字逻辑姿态控制律设计

建立了先进上面级姿态动力学模型和推力器配置方案,根据快速大角速度精确姿态机动的任务要求,设计了数字逻辑姿态控制律.考虑姿态角和姿态角速度的相互关系和测置误差的存在,将姿态相平面划分为多个控制区域,以节省燃料和避免测量误差的影响.在实际上面级参数下进行姿态机动控制仿真,采用数字逻辑姿态控制律能在16s内实现先进上面级俯仰角60°的大角度姿态机动,并能很好地保证姿态指向精度和姿态稳定度,控制效果也优于脉冲宽度调制.     

机动目标建模及机动检测算法

为解决机动目标跟踪问题,建立了非机动(匀速直线运动)和机动目标当前统计两种动态模型,并对机动目标当前统计模型的输入控制的估计进行了适当改进.同时对非机动模型的观测残差和机动模型的输入估计进行检验,以便准确检测目标机动.     

不确定失效阈值影响下考虑设备剩余寿命预测信息的最优替换策略

为了进一步提升设备维修决策的科学性,通过建立综合设备剩余寿命预测数据与不确定失效阈值的最优维修决策模型,实现了不可维修设备的最优替换策略.构建基于非线性Wiener过程的设备性能退化模型,并采用极大似然法估计退化模型参数;提出一种基于期望最大(Expectation Maximization,EM)算法的不确定失效阈值...     

可靠度限制下相控阵雷达天线阵面T/R单元维修模型

为了描述维修活动对相控阵雷达天线阵面系统的影响,构建了以可靠度为基础的“修旧不如新”定期维修优化模型。对相控阵雷达T/R单元失效下的天线性能参数进行分析,根据指标确定系统不能正常工作的失效T/R单元阈值; 针对大部分维修活动都难以使T/R单元修复如新的事实,引入失效率递增因子,在系统一定的可靠度水平上,以相控阵雷达系统的使用可用度和维修费用率为优化决策参数,建立了系统的维修优化模型,并运用边际效能算法对系统的最佳预防换件维修周期和换件维修组数量进行求解。实例运算结果表明,该模型突破了已有模型“修旧如新”的限制条件,更符合实际,能为维修策略的制定提供理论依据。     

Some new results on the preservation of the NBUE and NWUE aging classes under the formation of coherent systems

We consider the classical problem of whether certain classes of lifetime distributions are preserved under the formation of coherent systems. Under the assumption of independent and identically distributed (i.i.d.) component lifetimes, we consider the NBUE (new better than used in expectation) and NWUE (new worse than used in expectation) classes. First, a necessary condition for a coherent system to preserve the NBUE class is given. Sufficient conditions are then obtained for systems satisfying this necessary condition. The sufficient conditions are satisfied for a collection of systems which includes all parallel systems, but the collection is shown to be strictly larger. We also prove that no coherent system preserves the NWUE class. As byproducts of our study, we obtain the following results for the case of i.i.d. component lifetimes: (a) the DFR (decreasing failure rate) class is preserved by no coherent systems other than series systems, and (b) the IMRL (increasing mean residual life) class is not preserved by any coherent systems. Generalizations to the case of dependent component lifetimes are briefly discussed.     

箭(弹)级间螺栓法兰连接结构冲击失效实验与数值仿真

基于火箭(导弹)级间螺栓法兰连接结构,简化设计并制作了一组原理性实验件,利用ABAQUS软件建立有限元模型,设计并进行了多次落锤冲击失效实验,其中包括轴向和横向两种工况,考虑了螺栓均布与非均布、螺栓直径和螺栓-栓孔间隙等不同结构特点。实验过程中采集了螺栓力时程响应数据、柱段关键点应变时程响应数据、锤头冲击力和冲击速度及连接界面开缝位移等多组数据。根据实验效果和实测数据,分析了连接结构冲击失效机理,并对比验证发现有限元模型数值模拟效果和精度与实验结果吻合较好。研究结论可为箭(弹)级间连接结构抗冲击设计提供参考。     

Opportunistic retooling of a flexible machine subject to failure

A set of jobs can be processed without interruption by a flexible machine only if the set of tools required by all jobs can be loaded in the tool magazine. However, in practice the total number of tools required by a job set would exceed the tool magazine capacity. In such situations, the job set has to be carefully partitioned at the start of the production run such that each partition can be processed without interruption. During the production run, if there are unscheduled machine downtimes due to machine failure, this provides an additional opportunity to optimally retool the magazine for a smaller job set consisting of just the unprocessed jobs. In this paper, we study job sequencing rules that allow us to minimize the total expected cost of machine down time due to machine failures and magazine retooling, assuming a dynamic re‐sequencing of the unprocessed jobs after each machine failure. Using these rules, we develop a branch‐and‐bound heuristic that allows us to solve problems of reasonable size. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 79–97, 2001     

考虑空间几何关系的反交会规避机动方法

针对具有自主接近能力的航天器开展反交会规避机动方法研究。建立仅测角相对导航模型,对完全不可观测机动进行定义,基于空间几何关系推导并证明了完全不可观测机动是不存在的。以施加规避机动后追踪器对逃逸器的测量值与未机动时的差异为优化目标,利用矢量乘积原理设计目标函数,建立优化模型并对变量约束进行分析,随后采用遗传算法对最优规避机动方向进行优化。给出的仿真算例结果表明:提出的规避机动方向计算方法能够使目标函数值达到最小,从而提升追踪器对逃逸器的状态估计难度,降低其估计精度。这为规避机动问题研究提供了一种新的视角,可为以主动接近航天器为新对象进行的规避研究提供有益借鉴。     

基于复合失效模式的寿命分布检验方法

产品往往受随机失效和耗损失效两种模式的双重影响,因此,构造指数威布尔分布表征该类产品的失效规律。首先,用图检验法对该类产品的寿命数据进行初步检验;其次,研究了该类产品寿命数据的极大似然估计的求解方法,进一步用伽方检验方法对寿命分布类进行了检验;最后,通过工程仿真例子说明了该方法的具体操作流程,最终验证了方法的正确性。