红外技术及其在消防领域中的应用

介绍红外技术及其在消防领域中的应用,其应用主要包括电气防火检查、火灾探测、火情侦察和灭火救援等方面.     

基于峰值点形态信息的SAR图像舰船尾迹检测算法

在分析合成孔径雷达(SAR)图像中舰船尾迹线性特性的基础上,针对SAR图像线性特征产生因素的多样性,及由此引起的Radon变换域中尾迹峰值点检测的不确定性,提出了一种基于峰值点形态信息的尾迹检测算法。算法门限化图像的Radon变换系数,提取出所有可能的峰值点;对这些相应的局部峰值点的一维截面进行连续小波变换峰值点匹配,根据提取到的参数形成决策矢量在特征空间中进行决策。仿真和实际数据处理的结果表明,该方法能有效、准确地检测到SAR图像中的舰船尾迹并判决其真假类别。     

外加信号增强随机共振在微弱信号检测中的应用

在利用随机共振检测微弱周期信号的基本原理基础上,给出一种通过外加可控信号激励出随机共振现象,并将之应用于微弱信号检测的方法。采用仿真信号对该方法进行了验证,通过归一化尺度变换,将该方法的适用频率扩展到机械系统特征信号频段。结果表明,该方法简单可行,能把信噪比较低的周期信号从强背景噪声中提取出来,在机械故障检测中具有应用前景。     

利用矩阵求极大相容类的一种方法

寻找相容关系的极大相容类和简单图的极大完全子图，在解决二元关系与数据挖掘和管理决策中的具体问题时有重要作用。利用相容关系的极大相容类与简单图的极大完全子图之间的对应关系，对极大完全子图的路径长度进行分析，得到了关于极大完全子图路径长度的一个定理。并根据该定理构造了一个用矩阵的路径长度搜索简单图的极大完全子图的方法，进而利用该方法找出了对应相容关系的极大相容类。     

The logistic–exponential survival distribution

For various parameter combinations, the logistic–exponential survival distribution belongs to four common classes of survival distributions: increasing failure rate, decreasing failure rate, bathtub‐shaped failure rate, and upside‐down bathtub‐shaped failure rate. Graphical comparison of this new distribution with other common survival distributions is seen in a plot of the skewness versus the coefficient of variation. The distribution can be used as a survival model or as a device to determine the distribution class from which a particular data set is drawn. As the three‐parameter version is less mathematically tractable, our major results concern the two‐parameter version. Boundaries for the maximum likelihood estimators of the parameters are derived in this article. Also, a fixed‐point method to find the maximum likelihood estimators for complete and censored data sets has been developed. The two‐parameter and the three‐parameter versions of the logistic–exponential distribution are applied to two real‐life data sets. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

What you should know about simulation and derivatives

Derivatives (or gradients) are important for both sensitivity analysis and optimization, and in simulation models, these can often be estimated efficiently using various methods other than brute‐force finite differences. This article briefly summarizes the main approaches and discusses areas in which the approaches can most fruitfully be applied: queueing, inventory, and finance. In finance, the focus is on derivatives of another sort. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

基于频谱分析的飞行模拟器飞行性能验证

介绍频谱分析用于仿真系统模型验证的原理和方法,提出一种应用频谱分析进行飞行模拟器飞行性能验证的方案。结合飞行试验和仿真模型的输出数据,分别采用窗谱估计和最大熵谱估计方法对某型飞行模拟器的飞行性能进行验证,并对验证结果进行分析。结果表明,频谱分析法用于飞行模拟器飞行性能的验证是有效的,可为其他训练模拟器的性能验证提供参考。     

Two‐stage component test plans for testing the reliability of a series system

A system reliability is often evaluated by individual tests of components that constitute the system. These component test plans have advantages over complete system based tests in terms of time and cost. In this paper, we consider the series system with n components, where the lifetime of the i‐th component follows exponential distribution with parameter λ_i. Assuming test costs for the components are different, we develop an efficient algorithm to design a two‐stage component test plan that satisfies the usual probability requirements on the system reliability and in addition minimizes the maximum expected cost. For the case of prior information in the form of upper bounds on λ_i's, we use the genetic algorithm to solve the associated optimization problems which are otherwise difficult to solve using mathematical programming techniques. The two‐stage component test plans are cost effective compared to single‐stage plans developed by Rajgopal and Mazumdar. We demonstrate through several numerical examples that our approach has the potential to reduce the overall testing costs significantly. © 2002 John Wiley & Sons, Inc. Naval Research Logistics, 49: 95–116, 2002; DOI 10.1002/nav.1051     

单站测向定位技术研究

对单站测向定位的技术进行了研究,结果表明:固定单站测向定位只能确定目标运动的航向,并给出了航向的计算方法;运动平台单站测向定位可以确定目标运动的航迹(测向平台以匀速直线运动除外),给出了目标位置的计算方法;同时探究了运动平台做匀速直线运动不能对目标定位的原因,进一步明确了运动平台单站测向定位的条件.     

光电头盔系统信号处理分析与探讨

阐述了当前广泛采用的光电式头盔测位系统的组成和原理,给出了解算瞄准线参数的数学关系式。对信号处理和精度进行了分析,导出了误差表达式,可用于系统设计中误差的估算和验证。通过信号处理分析,论述了影响精度的主要因素,最后,提出了从根本上提高精度的方法——峰值点检测处理技术。