应用型工程力学教学方法的探索与实践

应用型工程力学教学模式主要包括四种有代表性的教学方法,即:生动形象教学法、贴近日常生活事例教学法、贴近具体工程教学法、重大工程事故教学法。     

混凝土高温力学性能及数学模型研究评述

分析了高温作用下混凝土内部发生的物理化学变化及其对混凝土力学性能产生的影响.通过对国内外部分混凝土高温力学性能试验成果总结分析,得到了混凝土高温作用后抗压强度、抗拉强度及弹性模量等力学性能的劣化规律.在对混凝土高温数学模型进行总结归纳的基础上,深入探讨了不同模型的特点以及存在的不足,为进一步研究混凝土结构的高温力学性能...     

多铁性磁电智能复合材料的力学研究进展

介绍了多铁性磁电智能复合材料的概念、分类及发展现状;总结了两类典型多铁性复合材料的力学问题（包括波动与振动问题、夹杂问题、断裂问题等）的研究进展;分析了层状多铁性复合材料力学行为的特殊性;基于应变介导的磁电耦合机制,阐述了界面断裂力学研究对于层状多铁性复合材料研制的重要性和必要性;最后指出了该领域下一步的研究方向。     

圆柱形装药驱动轴向预制破片飞散特性

为了增强柱形战斗部轴向威力,在无壳柱形战斗部底面布置单层离散的预制破片。开展圆柱形TNT装药驱动轴向预制破片飞散试验,获得预制破片的最大初速、飞散角等特征参数;运用LS-DYNA软件对装药驱动预制破片过程进行数值模拟,阐述预制破片群飞散过程;对装药驱动整体平板理论计算公式进行改进,获得预制破片的最大初速。结果表明:破片初速理论计算结果、数值计算结果和试验结果吻合良好;随着与装药底部中心距离的加大,破片初速、径向飞散角分别近似呈“抛物线”减小、增大;试验实测、理论计算得到的破片最大初速值超过2500 m/s,试验实测的径向飞散角最大约为22°,而周向飞散角则普遍较小,均值在5°以内。     

A novel formulation of material nonlinear analysis in structural mechanics

This article demonstrates a novel approach for material nonlinear analysis. This analysis procedure eliminates tedious and lengthy step by step incremental and then iterative procedure adopted classically and gives direct results in the linear as well as in nonlinear range of the material behavior. Use of elastic moduli is eliminated. Instead, stress and strain functions are used as the material input in the analysis procedure. These stress and strain functions are directly derived from the stress-strain behavior of the material by the method of curve fitting. This way, the whole stress-strain diagram is utilized in the analysis which naturally exposes the response of structure when loading is in nonlinear range of the material behavior. It is found that it is an excellent computational procedure adopted so far for material nonlinear analysis which gives very accurate results, easy to adopt and simple in calculations. The method eliminates all types of linearity assumptions in basic derivations of equations and hence, eliminates all types of possibility of errors in the analysis procedure as well. As it is required to know stress distribution in the structural body by proper modelling and structural idealization, the proposed analysis approach can be regarded as stress-based analysis procedure. Basic problems such as uniaxial problem, beam bending, and torsion problems are solved. It is found that approach is very suitable for solving the problems of fracture mechanics. Energy release rate for plate with center crack and double cantilever beam specimen is also evaluated. The approach solves the fracture problem with relative ease in strength of material style calculations. For all problems, results are compared with the classical displacement-based liner theory.     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

巨额财产来源不明罪法理检讨及完善

巨额财产来源不明罪是学界中争议较多的一个罪名。通过考察本罪的客观要件,“可以责令说明来源”不是本罪的构成要件,仅是司法机关调查案件的法定程序,因此,本罪存在自首;本罪的法定刑基本适宜,为便于司法实践,有必要对该罪的法定刑加以细化并设置财产刑;仅靠刑法不能抑制本罪的发生,应完善前置制度等非刑罚措施。     

磁流变液制备过程中球料比对其性能的影响

以羰基铁粉为悬浮相，硅油为分散相，采用高速球磨机球磨分散的方法制备磁流变液，考察了磁流变液制备过程中球料比对其零场粘度、沉降稳定性、流变性能的影响。利用NXS-11A旋转粘度计、自然沉降法分别对磁流变液的零场粘度、流变性和沉降稳定性进行了测试，研究发现球料比对磁流变液的粘度和沉降稳定性影响很大。随着球料比的不断增加，其粘度呈现出先减小后增大的趋势，当球料比为3：9时，所获得零场粘度最低。其沉降稳定性与粘度有很好的对应关系，即粘度大的沉降速率慢，粘度小的则沉降速率快。在磁流变液组成成分不变的情况下，制备磁流变液的过程中可以通过改变球料比的方法来改变磁流变液的零场粘度和沉降稳定性。     

弹性压杆稳定性的一般表达式

本文推导出等截面弹性压杆稳定性的一般表达式。17种在各种边界条件下的弹性压杆的临界压力计算公式均是它的特殊情况。     

军民融合背景下国防知识产权运行机制研究

以习近平总书记关于军民融合和国家安全系列重要讲话精神为指导原则和设计思想,针对国防知识产权运营机制问题展开研究,从运营机制总体框架,可市场化国防知识产权生成机制、价值生成机制、价值实现与传递机制等方面,设计了军民融合背景下国防知识产权运营机制,并提出机制实施的保障措施。