设备管理系统的排队论分析

该文应用排队论的理论分析了设备损修系统中最优设备的解法。     

聚二甲基硅烷高压合成聚碳硅烷的组成与结构分析

以聚二甲基硅烷(PDMS)为原料,在高压釜内450℃下反应6h,制备了聚碳硅烷(PCS)先驱体。对其组成及结构进行了表征,推测了PCS的大致结构模型。研究表明,PCS分子包含Si CH3、Si CH2 Si、Si H组成的SiC4、SiC3H等结构单元,实验式为SiC1.87H7.13O0.03。与常压高温裂解制备的软化点相近的PCS相比,二者的元素组成基本一致,高压合成的PCS具有较高的分子量和硅氢含量,但支化度略高。     

基于流场特性的管内检测机器人的外形优选研究

管道内检测机器人的结构形状是影响其运动学、动力学特性的关键因素,在机器人设计中占有重要地位。在合理提出一些基本假设后,用二阶迎风差分格式离散管道内检测机器人附近流场的控制方程,并用SIMPLE算法求解,得到了7种不同形状的管道内检测机器人所受的差压驱动力及其周围的流场信息,并对这几种结构的CFD特性作了比较。最后综合空化条件、驱动力、腔内有效体积和加工难度等因素,确定了上游半球形结构为设计形状。     

无人飞艇平台摄像机防振研究

无人飞艇作为理想的信息平台,在预警、反恐、侦察监视和通信等方面发挥着重要作用。而艇载侦察监视设备CCD摄像机受到飞艇发动机振动的影响,会对成像产生消极影响。为此,分析了影响飞艇摄像机的成像质量的因素,采用被动减振的方案,达到了有效克服振动的目的。     

电视文化对青少年婚恋观的负面影响及对策

婚恋观是人生观的重要组成部分。青少年时期是人生观、价值观形成的关键时期。随着电视机的普及、收视率的提高,电视文化这种新的文化形态对青少年的发展及教育的影响日渐广泛,电视中一些不良信息对青少年婚恋观的形成具有潜移默化的影响。本文着重从电视文化的传播特点和传播内容两方面入手,分析电视文化对于青少年婚恋观的负面影响,并针对如何减少电视文化对青少年婚恋观的负面影响做了初步探讨。     

Multi-objective design optimization of composite submerged cylindrical pressure hull for minimum buoyancy and maximum buckling load capacity

This paper presents the design optimization of composite submersible cylindrical pressure hull subjected to 3 MPa hydrostatic pressure. The design optimization study is conducted for cross-ply layups [0s/90t/0u], [0s/90t/0u]s, [0s/90t]s and [90s/0t]s considering three uni-directional composites, i.e. Carbon/Epoxy, Glass/Epoxy, and Boron/Epoxy. The optimization study is performed by coupling a Multi-Objective Genetic Algorithm (MOGA) and Analytical Analysis. Minimizing the buoyancy factor and maximizing the buckling load factor are considered as the objectives of the optimization study. The objectives of the optimization are achieved under constraints on the Tsai-Wu, Tsai-Hill and Maximum Stress composite failure criteria and on buckling load factor. To verify the optimization approach, optimization of one particular layup configuration is also conducted in ANSYS with the same objectives and constraints.     

某压力容器壳体水压爆裂原因分析

针对某压力容器壳体生产过程中出现的水压试验异常爆裂问题,通过材料成分、热处理组织、力学性能、宏观和微观断口分析,确定了裂源位置、裂纹缺陷性质、产生原因及断裂机理;通过断裂力学分析,确定了水压爆裂的原因。提出了淬火工艺改进建议和防范措施。     

基于MSP430单片机的海浪水压场自动测量系统

提出了基于MSP430单片机的水压场自动测量系统的设计方案和实现方法并进行了实际测量.解决了自动测量系统中的低噪声、低功耗、高分辨率、大容量存储等关键技术.实验结果表明:该系统具有自动运行、电池供电、记录时间长等特点.适于高海况条件下的海浪水压场的测量.     

高精度气压源的Fuzzy-PID控制研究

设计了Fuzzy-PID双模控制器并应用到高精度气源压力控制系统中.试验表明,单纯采用PID控制的高精度气源压力控制系统具有精度高的优点,但不适应系统参数的变化.Fuzzy-PID双模控制器具有响应速度快、稳态误差小、鲁棒性强的优点.通过试验比较了传统PID、Fuzzy控制和Fuzzy-PID双模控制3种控制策略,试验结果表明,Fuzzy-PID双模控制器综合了Fuzzy控制和PID控制的优点,适用于高精度气源压力控制系统.     

Theoretical study of an energetic material di-1H-1,3,4-triazole derivatives

Computations by density functional theory (DFT) method are performed on a series of di-1H-1,3,4-triazole derivatives with different substituents and linkages. The heat of formation (HOF) is predicted by the designed isodesmic reactions. The predicted results reveal that –N₃ and –NN– groups are effective structural units for increasing the HOF values of the di-1H-1,3,4-triazole derivatives. The HOMO–LUMO gap is affected by the substituents and linkage groups. Detonation performance is evaluated using the Kamlet–Jacobs approach based on the calculated density and HOF. The results indicate that –NO₂, –NF₂, –NH–, –NH–NH– and –NN– groups are helpful for enhancing the detonation properties of di-1H-1,3,4-triazole derivatives. The bond dissociation energy and bond order of the weakest bonds are analyzed to investigate their stability. It is observed that the –CH₂–, –CH₂–CH₂– and –CHCH– groups are effective structural units for improving the stabilities of these derivatives. Considering the detonation performance and the stability, five compounds are screened as the potential candidates for high energy density materials.