车辆悬挂系统的主动优化控制器设计及仿真

基于特征结构配置参数化结果,提出了车辆悬挂系统的主动优化控制器设计方法。该方法直接基于车辆悬挂系统的参数矩阵,便于工程应用。车辆悬挂系统的仿真实例表明所提主动优化控制器设计方法简单且有效。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

基于效果的装备保障合同商选择方法

基于效果的合同商装备保障是将基于效果的维修理念应用于合同商装备保障领域提出的一种装备保障策略,更加关注装备的作战效能,同时对合同商提出了更高要求,因此,选择恰当的合同商对于实现预期结果显得更为重要。而合同商选择是一个多准则决策问题,很大程度上依赖于决策者和决策条件状态的不确定性和模糊性。构建了一个基于效果的合同商选择系统流程,并提出了基于相似度的模糊TOPSIS法,简化了计算流程,最后通过一个具体案例来验证该方法的有效性。     

使用双水压传感器抗风浪干扰原理

提出了在水雷上使用双水压传感器的设想.传统水雷只使用一个水压传感器,提供的信号信息稍嫌不足,给水压引信抗风浪干扰带来了限制.通过使用两个传感器,利用海浪水压场传播时在两个传感器上的时延信息,使用抵消方法压制海浪水压信号.初步分析表明,使用双传感器可以使水压引信抵抗一定的海浪水压信号的干扰.     

目标选择理论方法

针对现代战争特点和要求,给出了适合不同目标系统的6种打击目标选择理论,即重心效应理论、链条效应理论、瓶颈效应理论、连累效应理论、层次效应理论和组合理论。并运用这些理论,针对不同类型目标,给出了6种方法,即非线性规划方法、集合论方法、矩阵方法、群落型方法、网络型方法和塔型方法,基本涵盖了远程攻击武器目标选择理论与方法。     

红外/雷达传感器协同跟踪算法研究

通常情况下 ,主动传感器在检测到目标之前就暴露了携带它的飞行器 ,因此 ,在作战环境下 ,限制主动检测设备的使用是必要的。被动传感器工作时具有隐蔽性 ,在现代军事跟踪系统中起着重要作用。研究了红外 /雷达的协同跟踪 ,以满足跟踪精度和隐蔽性双重要求     

战场目标声/震侦察与识别

介绍了一个采用被动侦察体制的多传感器侦察系统。在研究了地面战场典型目标的噪声场和地震动场产生机理的基础上 ,对战场目标噪声信号和地震动信号进行功率谱估计 ,分析了各种目标的线谱特性。设计了拓扑结构合适的 BP神经网络分类器 ,可以有效地分类识别战场典型目标     

装备器材库温湿度监控系统的设计与实现

军用装备器材仓库温湿度监控是目前亟待解决的问题.文中详细地阐述了种切实可行的设计方法--主从式两级数字化监控系统的设计原理与实现方法,并用Borland C++Builder语言对其组态软件进行程序设计.     

Optimal control of an M/G/1 queue with impatient priority customers

An optimal operating policy is characterized for the infinite‐horizon average‐cost case of a single server queueing control problem. The server may be turned on at arrival epochs or off at departure epochs. Two classes of customers, each of them arriving according to an independent Poisson processes, are considered. An arriving 1‐customer enters the system if the server is turned on upon his arrival, or if the server is on and idle. In the former case, the 1‐customer is selected for service ahead of those customers waiting in the system; otherwise he leaves the system immediately. 2‐Customers remain in the system until they complete their service requirements. Under a linear cost structure, this paper shows that a stationary optimal policy exists such that either (1) leaves the server on at all times, or (2) turns the server off when the system is empty. In the latter case, we show that the stationary optimal policy is a threshold strategy, this feature being commonplace in most of priority queueing systems and inventory models. However, the optimal policy in our model is determined by two thresholds instead of one. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 201–209, 2001     

火力运用对策空间模型

根据空 -地作战的特点 ,提出了软、硬火力单位的概念 ,根据模型提出了作战指数、生存指数 ,为双方的实力与“保卫目标”的安全度分析提供了数量依据 ;根据微分对策和战术原则提出了规范作战模式等概念 ,为构造火力运用、兵力数量需求等算法搭起一个框架。