公安边防部队遂行边境封控任务探究

边境封控行动事关国家安全和社会稳定大局,已成为新的历史条件下公安边防部队重要的职能和任务。分析公安边防部队边境封控行动的主要任务,探讨边境封控行动的特点和原则,提出公安边防部队边境封控行动的主要方法。     

Formation of adiabatic shearing band for high-strength Ti-5553 alloy: A dramatic thermoplastic microstructural evolution

By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti–5Al–5V–5Mo–3Cr (Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band (ASB) at low compression strain, while bimodal alloy is considerably ASB-resistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB. In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary α grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of α lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of α/β nano-multilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.     

空投设备气囊缓冲系统的缓冲特性分析与匹配方法

采用解析分析法,根据排气口流量方程和载荷运动方程建立了无量纲的空投设备气囊缓冲过程数学模型,并根据此模型构造了气囊的匹配设计图。讨论了排气口面积、气囊高度、着陆初速度、载荷质量、气囊底面积及排气口开启压力等参数对气囊缓冲性能的影响,提出了空投设备气囊缓冲系统的参数匹配设计方法,为空投设备气囊缓冲系统的匹配设计提供了技术支持。     

多尺度PCA-HOG遥感异源图像匹配算法

针对遥感异源图像匹配中非线性灰度畸变和强噪声干扰问题,提出一种基于主成分分析(Principal Components Analysis,PCA)和方向梯度直方图(Histogram of Oriented Gradients,HOG)的遥感异源图像匹配算法.该算法利用HOG提取图像间的几何结构共性特征,能有效克服异源...     

边坡稳定性理论及其局限性

边坡分析理论经过近几十年的发展,基本形成了完善的体系。较为典型的有 极限平衡法,极限分析法,有限元法等。对各种分析方法做了简要的回顾与评述。基于极限 平衡原理发展的各种分析方法,大多需要做许多假设,同时对岩质边坡又不能很好地考虑其 断层节理特征。有限元强度折减法,是近年来发展起来的一种分析方法,与极限平衡法相比 不需要任何假设,可以求得任意形状边坡的临界滑移面及其对应的安全系数,同时可以反映 边坡失稳及塑性区的发展过程,为岩土体边坡分析开辟了新的途径。     

二元共晶系相变材料热力学模型的研究

推导了二元共晶系的热力学模型,改进了单参数的Margules方程,引入了温度项,利用实验值对方程中的参数进行了回归,结果表明该热力学模型是可行的,从而可以应用该模型计算二元共晶系相变材料的最低共熔点和组成。     

气—固两相自由射流的粒子仿真方法

采用粒子仿真方法直接跟踪颗粒相运动轨迹,采用NND格式求解NS方程,数值模拟了气-固两相自由射流流场.计算结果表明,将粒子仿真与CFD方法相结合是研究气-固两相流动问题的有效途径.颗粒相参数变化将对气体流场产生一定影响.     

基于ADF4360-X的频率合成器设计

结合锁相环的基本原理,介绍了高集成整数分频频率合成器芯片 ADF4360-X 的特性,该系列芯片集成了 VCO 非常利于设备的小型化;以 ADF4360-7为例,给出了实际应用中的设计要点、实现方法和实现电路时的注意事项。测试结果显示,设计的频率合成器覆盖范围达到400 MHz,步进1 MHz,偏离中心频率1 kHz 处相位噪声达到-93 dBc/Hz。     

惯性测量匹配法测定船体变形实施方案研究

介绍了船体变形的产生原因,详细分析了船体变形对航姿参数的影响和惯性测量匹配在实船上测量船体变形时的几种实施方案。分别讨论了在中心航姿系统部位和局部基准部位是否安装加速度计和速率陀螺时的不同情况,具体推导了变形角、局部基准部位的航姿角和摇摆线速度的计算公式。对各种方案进行了分析比较,指出了各自的优缺点,为惯性测量匹配法在实船上的应用打下了基础。     

Analysis of a machine repair problem with an unreliable server and phase type repairs and services

In this paper we study a machine repair problem in which a single unreliable server maintains N identical machines. The breakdown times of the machines are assumed to follow an exponential distribution. The server is subject to failure and the failure times are exponentially distributed. The repair times of the machine and the service times of the repairman are assumed to be of phase type. Using matrix‐analytic methods, we perform steady state analysis of this model. The time spent by a failed machine in service and the total time in the repair facility are shown to be of phase type. Several performance measures are evaluated. An optimization problem to determine the number of machines to be assigned to the server that will maximize the expected total profit per unit time is discussed. An illustrative numerical example is presented. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 462–480, 2003