A novel gradient approach for optimal design and sensitivity analysis of EWMA control charts

Conventional control charts are often designed to optimize out‐of‐control average run length (ARL), while constraining in‐control ARL to a desired value. The widely employed grid search approach in statistical process control (SPC) is time‐consuming with unsatisfactory accuracy. Although the simulation‐based ARL gradient estimators proposed by Fu and Hu [Manag Sci 45 (1999), 395–413] can alleviate this issue, it still requires a large number of simulation runs to significantly reduce the variance of gradient estimators. This article proposes a novel ARL gradient estimation approach based on integral equation for efficient analysis and design of control charts. Although this article compares with the results of Fu and Hu [Manag Sci 45 (1999), 395–413] based on the exponentially weighted moving average (EWMA) control chart, the proposed approach has wide applicability as it can generally fit into any control chart with Markovian property under any distributions. It is shown that the proposed method is able to provide a fast, accurate, and easy‐to‐implement algorithm for the design and analysis of EWMA charts, as compared to the simulation‐based gradient estimation method. Moreover, the proposed gradient estimation method facilitates the computation of high‐order derivatives that are valuable in sensitivity analysis. The code is written in Matlab, which is available on request. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 223–237, 2014     

利用星角距不变性标定星敏感器内部参数

提出了一种恒星角距不变的星敏感器内部参数的地面标定方法。较常见的星角距的标定方法不同的是,该方法利用对在0°附近的角度变化较敏感的恒星角距的正弦值建立观测方程;采用两步法分别估计焦距、主点和高阶畸变系数,并采用迭代优化的方法,获得最优估计值。为了确保标定精度,对观测时刻的导航星进行了视位置的修正。实验结果表明,采用星角距的正弦值建立观测方程,估计精度较高,采用考虑高阶畸变的改进正弦法标定后的星角距误差的均方根值为2.2×10-5rad。     

Inequality‐based reliability estimates for complex systems

Full‐system testing for large‐scale systems is often infeasible or very costly. Thus, when estimating system reliability, it is desirable to use a method that uses subsystem tests, which are often less expensive and more feasible. This article presents a method for bounding full‐system reliabilities based on subsystem tests and, if available, full‐system tests. The method does not require that subsystems be independent. It accounts for dependencies through the use of certain probability inequalities. The inequalities provide the basis for valid reliability calculations while not requiring independent subsystems or full‐system tests. The inequalities allow for test information on pairwise subsystem failure modes to be incorporated, thereby improving the bound on system reliability. We illustrate some of the properties of the estimates via an example application. © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

军用电子机箱模态分析及测试

对某军用电子机箱的固有频率从有限元分析和模态试验测试两个方面进行研究,并将理论分析结果和模态试验测试结果进行对比,确定了电子机箱的固有模态.为今后电子机箱的设计提供了参考依据,为仿真分析提供了有效的有限元建模方法.     

双浮体波浪能转换装置中重心布置对波浪能吸收影响分析

提出一种基于横摇运动的双浮体波浪能转换装置,利用水面浮体与水下浮体之间的相对横摇运动实现对波浪能的吸收。在保持水下浮体稳定的前提下,水面浮体的横摇运动决定了整个装置对波浪能吸收情况。水面浮体的横摇运动受其横摇固有频率的影响,主要是重心布置。为了合理选择水面浮体的重心位置,采用数值分析的方法对箱型浮体在长峰不规则波下的工作情况进行分析,讨论重心布置对波浪能吸收的影响以及对PTO参数选择的影响。结果表明,重心的布置可改变波浪能吸收的频段,重心布置越低,可吸收的波浪能频段越广,越有利于波浪能的吸收。     

战时装备保障阵地选址不确定决策方法

针对战时选址属性信息为区间数的情形,提出了一种基于模糊偏序关系的装备保障阵地选址决策方法.首先,建立战时装备保障点选址的评估值模型,并对其进行预处理;然后建立了模糊偏序关系模型,将混合型评估值模型转化为评估关系模型,得到各备选点之间的偏序关系;最后,对偏序关系进行集结,得到全序关系,从而获取方案的优劣排序.这为战时装备保障阵地选址提供了一种新的有效途径.     

基于改进动态规划的雷达弱小目标检测与跟踪

针对复杂背景下雷达弱小目标的检测和跟踪问题,提出了一种改进动态规划的检测前跟踪算法.该方法用多级检验判决方法代替常用的两级门限检测,并用传统跟踪技术进行目标位置状态估计,根据估计值与状态值的欧氏距离设计一个惩罚项来改进值函数.通过仿真验证,结果表明该方法能有效消除伪航迹,减小计算量,提高对雷达弱小目标的检测和跟踪性能.     

混合总线网络化ATS硬件结构与组网方案设计

混合总线网络化ATS可整合多种总线测试仪器/设备功能,发挥不同总线测试平台优势,增强系统灵活性,节约新系统的构建成本.针对靶场测试设备现状,研究了基于网络化测试技术的混合总线ATS构建方法.提出了混合总线网络化ATS硬件结构并设计了利用接口适配器和利用网关设备2种组网方案.     

无位置传感器开关磁阻电机的转子位置检测与启动

提出了一种检测无位置传感器开关磁阻电机(SRM)无迟滞启动转子初始位置的估算方法,通过向电机定子相绕组注入瞬时(0.5 ms)测试脉冲来准确估算转子初始位置,从而实现转子处于任何位置时的无迟滞启动,详细的仿真分析证实了该方法的可行性,并且实验效果较好,进一步证实了该方法的有效性。     

直射武器弹药性能测试仪自动击发系统设计与实现

直射武器弹药性能测试仪是对直射武器弹药性能进行检测的一种装置,自动击发系统是直射武器弹药性能测试仪的重要组成部分,它是完成弹药自动发射、检测弹药性能的关键。介绍了自动击发系统的组成结构及其工作原理,对自动击发控制系统的实现进行了系统研究,详细介绍了自动击发系统结构参数的设计计算过程,并举例验证了其可靠性。