无奇点三维攻击时间控制滑模导引律

为研究导弹在视场角约束下的三维攻击时间控制问题,提出一种三维非线性滑模导引律。利用攻击时间误差设计滑模面,推导出三维形式的俯仰和偏航加速度指令;通过对所设计制导律进行简单修正,解决了零初始前置角引起的奇点问题;从数学上证明了该导引律的稳定性和收敛性,讨论了导引律相关参数的取值范围,分析了与纯比例导引法、解耦三维导引律之间的关系。仿真结果表明,所设计导引律能够在视场角约束条件下有效实现攻击时间增大或减小的控制;俯仰和偏航平面的耦合程度越强,该导引律控制能耗小的优势越为明显。     

Effect of organo-modified montmorillonite nanoclay on mechanical,thermal and ablation behavior of carbon fiber/phenolic resin composites

The mechanical, thermal and ablation properties of carbon phenolic (C-Ph) composites (Type-I) rein-forced with different weight percentages of organo-modified montmorillonite (o-MMT) nanoclay have been studied experimentally. Ball milling was used to disperse different weight (wt) percentages (0, 1,2,4,6 wt.％) of nanoclay into phenolic resin. Viscosity changes to resin due to nanoclay was studied. On the other hand, nanoclay added phenolic matrix composites (Type-II) were prepared to study the dispersion of nanoclay in phenolic matrix by small angle X-ray scattering and thermal stability changes to the matrix by thermogravimetric analyser (TGA). This data was used to understand the mechanical, thermal and ablation properties of Type-I composites. Inter laminar shear strength (ILSS), flexural strength and flexural modulus of Type I composites increased by about 29％, 12％and 7％respectively at 2 wt.％ addition of nanoclay beyond which these properties decreased. This was attributed to reduced fiber volume fraction (％Vf) of Type-I composites due to nanoclay addition at such high loadings. Mass ablation rate of Type-I composites was evaluated using oxy acetylene torch test at low heat flux (125 W/cm2) and high heat flux levels (500 W/cm2). Mass ablation rates have increased at both flux levels marginally up to 2 wt.％ addition of nanoclay beyond which it has increased significantly. This is in contrast to increased thermal stability observed for Type-I and Type-Ⅱ composites up to 2 wt.％addition of nanoclay. Increased ablation rates due to nanoclay addition was attributed to higher insulation effi-ciency of nanolcay, which accumulates more heat energy in limited area behind the ablation front and self-propagating ablation mechanisms triggered by thermal decomposition of organic part of nanoclay.     

装备表面现代维修保养技术研究

结合装备表面智能维修保养技术方面的研究成果,介绍了装甲装备故障智能检测技术、自适应、自修复功能材料,装甲装备器材全自动保养设备等先进技术,侧重装备维修保养阐述了如何提高信息化程度,推进军队武器装备维修保养技术的现代化建设。     

润滑脂氧化安定性的伏安法测定

应用伏安法测定了润滑脂中的抗氧剂含量,研究了润滑脂的氧化安定性和储存安定性与抗氧剂含量的关系。发现润滑脂在储存过程中抗氧剂的消耗是有规律的,开始阶段抗氧剂消耗较慢,一定时间后抗氧剂消耗突然加快,这一结果为指导润滑脂储存提供了科学依据。     

Si3 N4基复相陶瓷天线罩材料的制备及性能

基于高马赫数导弹天线罩为应用背景,以Si粉、BN粉、SiO2粉为主要原料,采用反应烧结法制备Si3N4基复相陶瓷材料,探讨了原料组成、成型工艺及坯体密度对材料性能的影响。试验结果表明:当原料中Si、BN和SiO2分别为55%、30%和10%时,材料强度可达96.7MPa,断裂韧性可达1.80MPa.m1/2。同时材料具有良好的介电性能及热物理性能。     

Nuclear weapons,existential threats,and the stability–instability paradox

Recent scholarship has largely ignored systematic differences in the existential threats that nuclear-weapon possessors pose to other states. This study theorizes that the capacity to pose existential threats shapes nuclear-armed states’ willingness to use military force against one another. We explore three hypotheses regarding how nuclear-based existential threats can deter conflict or encourage it, including under the conditions proposed by the stability–instability paradox. We rely on a statistical analysis of nuclear-armed dyads from 1950 to 2001 and employ the Nuclear Annihilation Threat (NAT) Index to capture variation in the existential threats nuclear-armed states pose to one another. We find that being able to pose an existential threat to another state emboldens potential initiators to use military force but does not deter attacks. The emboldening effects are particularly strong under the hypothesized conditions of the stability–instability paradox. Our study provides unique contributions to ongoing debates over the political effects of nuclear weapons.     

战时装备调配保障决策模型构建研究

分析了战时装备调配保障决策的特点,运用模糊聚类分析法对装备调配保障对象进行了分组和优先级排序,以此为基础,运用目标规划法构建了战时装备调配保障决策模型,最后,通过实例验证了模型的可行性和有效性．     

基于北斗、短波的高精度时钟系统研究与设计

介绍了北斗、短波授时技术;对高稳恒温晶振及其频率特性进行分析的基础上,设计了一种基于北斗卫星、短波无线电授时的高精度时钟系统;该系统通过利用北斗接收处理模块、短波授时接收模块得到的秒脉冲信号、时间信息,经过延迟修正处理、脉冲滤波、脉冲补偿、脉冲统计得到标准的秒脉冲信号,实现对恒温晶振频率的校准,获得一个短期及长期频率稳定度都比较优良的时间频率标准,同时利用校频后恒温晶振分频出的1pps信号对时间芯片进行校准,对外输出高精度时间信息;对恒温晶振校频系统的基本工作原理及部分模块电路图进行了说明,试验结果表明,在时间不长于1h内,频率准确度优于1×10-10;该系统实用方便的方法达到了将晶体振荡器校准到较高指标的目的。     

内编队地球重力场测量性能数值分析

内编队系统通过实现内卫星纯引力轨道环境和内卫星精密定轨,完成高精度地球重力场测量,实现了不依赖于加速度计的重力卫星实施新途径。针对内编队重力场测量性能难以解析分析的情况,基于MATLAB并行程序设计进行了重力场测量数值模拟,获得了内编队重力场测量的有效阶数及其精度。在内编队轨道高度为300km、内卫星干扰力为1.0×10-10m/s2、外卫星定轨精度为3cm、内外卫星相对状态测量精度为1mm的条件下,计算得到内编队测量重力场的有效阶数为72,相应的大地水准面累积误差为44cm,重力异常累积误差为4.5mGal,由此可知内编队测量重力场的有效阶数主要分布在低阶部分。     

基于组合赋权雷达图实现电网电能质量综合评估

将改进的组合赋权雷达图方法用于电网电能质量综合评估。对主观、客观赋权法组合,基于组合权重与原权重之间的偏差尽可能小的优化思想,求取雷达图中各项指标的组合权值。利用各指标对应的扇形区域的对角线作为指标轴绘制雷达图,不仅最大限度体现各指标的独立权重,也反映了各指标之间的相互影响。利用雷达图的面积和周长两个变量完成对电能质量的综合评估。最后通过应用实例,验证了论文方法的合理性和在电能质量综合评估中的有效性。