内腐蚀缺陷尺寸对DN150承插管线承压能力的影响

为了科学地指导DN150承插管线的使用与管理,采用非线性有限元法对带内腐蚀缺陷的DN150承插管线进行了剩余强度的评估。通过分析和计算,研究了腐蚀缺陷宽度、长度和深度对管线极限承载能力的影响。结果表明：腐蚀缺陷宽度对DN150承插管线的承载能力影响很小,可忽略不计;随着腐蚀缺陷长度的增加,管线的承载能力略微减小,当缺陷长度达到150mm,管道失效压力基本不变;随着腐蚀缺陷深度的增加,管道失效压力呈线性递减,其对管道失效压力的影响程度远远大于腐蚀缺陷长度。     

基于改进CS的随机PRI雷达精确测速及杂波抑制算法

传统的脉冲多普勒雷达存在严重的测距测速模糊和盲区效应。考虑在正常脉冲重复间隔(PRI)上叠加一个随机扰动,并把PRI的随机变化巧妙转化为稀疏观测矩阵的受限等距性质,提出的基于压缩感知的随机脉冲重复间隔雷达为全相参动目标检测提供了一种新思路。针对其在实际应用中存在的粗糙损失和杂波干扰两个问题,分别提出了基于局部词典细化的精确测速算法和基于改进优化模型的杂波抑制方法。仿真实验结果表明该方案具有较高的测速精度和较强的杂波抑制性能。     

Numerical investigation of the failure mechanism of cubic concrete specimens in SHPB tests

Cylindrical specimens are commonly used in Split Hopkinson pressure bar (SHPB) tests to study the uniaxial dynamic properties of concrete-like materials.In recent years,true tri-axial SHPB equipment has also been developed or is under development to investigate the material dynamic properties under tri-axial impact loads.For such tests,cubic specimens are needed.It is well understood that static material strength obtained from cylinder and cube specimens are different.Conversion factors are obtained and adopted in some guidelines to convert the material strength obtained from the two types of specimens.Previous uniaxial impact tests have also demonstrated that the failure mode and the strain rate effect of cubic specimens are very different from that of cylindrical ones.However,the mechanical background of these findings is unclear.As an extension of the previous laboratory study,this study performs numerical SHPB tests of cubic and cylindrical concrete specimens subjected to uniaxial impact load with the validated numerical model.The stress states of cubic specimens in relation to its failure mode under different strain rates is analyzed and compared with cylindrical specimens.The detailed analyses of the numerical simulation results show that the lateral inertial confinement of the cylindrical specimen is higher than that of the cubic specimen under the same strain rates.For cubic specimen,the corners are more severely damaged because of the lower lateral confinement and the occurrence of the tensile radial stress which is not observed in cylindrical specimens.These results explain why the dynamic material strengths obtained from the two types of specimens are different and are strain rate dependent.Based on the simulation results,an empirical formula of conversion factor as a function of strain rate is proposed,which supplements the traditional conversion factor for quasi-static material strength.It can be used for transforming the dynamic compressive strength from cylinders to cubes obtained from impact tests at different strain rates.     

One-bit splitting deceptive jamming against SAR

One-bit quantization is a promising technique due to its performance retention and complexity reduction in a deceptive jammer against synthetic aperture radar (SAR). In this paper, the 1-bit quantization technology is utilized to agilely generate split false targets in the SAR imagery once the radar signal is intercepted, which reduces the complexity of the jammer significantly with guaranteed focusing quality. A single-frequency threshold is used to decompose harmonics incurred by the 1-bit quantization, and its parameters are adjusted through different pulse repetition intervals to provide steerable modulations. In this way, the SAR signal is split into coupled false scatterers during the 1-bit interception. By further deploying amplitude, time-delay, and Doppler frequency modulations on the 1-bit intercepted signal, the split false targets are created. The proposed approach is compared with different deceptive jamming methods to show its validity in effectiveness and cost, and numerical experiments are also presented for verification.     

钢框架梁柱焊接连接抗震性能试验研究

以梁端腹板的扇形孔形状为主要参数,进行了4个足尺钢框架梁柱焊接节点往复加载下的破坏试验。通过对弯矩—塑性转角和弯矩—累积塑性变形倍率试验曲线对比分析表明,扇形孔是节点变形能力和破坏形式的主要影响因素。改进扇形孔构造是一种有效措施,既可提高节点的抗震性能,又能保持制作工艺与传统节点基本相同。     

快速传递对准的抗野值方法研究

快速传递对准对滤波精度与收敛速度有着严格的要求,而测量野点的存在会严重破坏传递对准的精度。提出了一种新的抗野值滤波方法,在线取测量信号的一个小区间,采用正向对称延拓的方法构成新序列并对其进行小波阈值去噪,检测出野点,用前几个周期的信号构造新的测量值进行Kalman滤波,有效地剔除了野点的影响,滤波系统保持了很好的精度,满足了传递对准的要求。     

Some probability functions in reliability and their applications

There has been much research on the general failure model recently. In the general failure model, when the unit fails at its age t, Type I failure (minor failure) occurs with probability 1 ? p(t) and Type II failure (catastrophic failure) occurs with probability p(t). In the previous research, some specific shapes (constant, non‐decreasing, or bathtub‐shape) on the probability function p(t) are assumed. In this article, general results on some probability functions are obtained and applied to study the shapes of p(t). The results are also applied to determining the optimal inspection and allocation policies in maintenance problems. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

GNSS多系统联合的探月飞行器轨道定位分析*

为适应深空探测的应用需求,全球卫星导航系统对深空飞行器定位的可行性问题备受关注。针对探月飞行器月球公转轨道上的GNSS定位问题,以高轨道飞行器GNSS定位的研究为基础,采用多系统联合定位的方法进行仿真。分析了载波功率与噪声功率密度比为15dB-Hz的弱信号捕获门限下,各系统联合定位时波束主瓣和旁瓣的可用性,同时对各系统联合情况下的精度因子值进行分析。仿真结果表明：当接收到的卫星天线辐射的主瓣和旁瓣信号均高于载噪比门限时,全球卫星导航系统的三系统或四系统的联合能满足实时定位条件;而旁瓣损耗不加以补偿时,接收信号载噪比低于门限并导致任意联合方式均无法完成定位。各系统联合的精度因子分析表明：单系统或双系统联合的几何精度因子变化剧烈,四系统联合相比三系统联合的几何精度因子下降16.93%;三系统联合定位方案中,美国全球定位系统、中国的北斗卫星导航定位系统与欧洲的伽利略卫星导航定位系统联合方案的几何精度因子值变化最平稳,为最佳选择。理论分析和仿真结果为探月飞行器定位技术研究和星载多系统接收机设计提供参考。     

微波脉冲对硅基双极型晶体管的损伤特性

利用微波脉冲注入实验平台,对硅基双极型晶体管低噪声放大器进行了损伤效应实验。在微波脉冲对硅基双极型晶体管低噪声放大器损伤的失效分析中,当低噪声放大器增益下降大于10d B时,发现硅基双极型晶体管出现了永久损伤。通过对比测量硅基双极型晶体管损伤前后的电特性以及利用扫描电子显微镜观测损伤后晶体管的微观特性发现:硅基双极型晶体管被微波脉冲损伤后,基区的硅材料烧蚀导致发射结和集电结短路,不再具有PN结特性,导致器件失效。     

适用于海底观测网络的恒流远供系统可靠性分析方法

以水下单元的短路/开路故障模式为基础,提出一种分析缆系海底观测网络恒流远供系统可靠性的方法。根据系统供电和结构特性,将系统分成不同的供电链路和链路段。详细研究处于不同位置的各种水下单元发生故障时,对链路和观测设备的供电状态的影响。归纳导致系统和各链路无法正常导通、观测设备无法得到供电的状态情况,分析不同故障状态发生的概率,进而得出求解系统、供电链路与供电设备的供电可靠度的方法。通过算例分析,进一步梳理了3种供电可靠性的共性规律,说明在设计和建设恒流远供系统时,应综合考量这3种供电可靠性。