基于博弈论的装备科研、购置、维修经费比例关系优化分析

通过不同时期国家战略部署、科研发展情况及经济承受能力对装备经费分配的影响分析,采用博弈的方法,建立了装备科研、购置和维修费之间的比例关系优化模型,给出了寻求纳什均衡点的迭代算法,并进行了仿真计算.仿真结果证明了该方法的可行性与正确性.     

某型弹用管控高温通讯异常分析

某型弹用管控处理装置在环境应力筛选试验高温阶段出现通讯异常现象,对故障产生的原因进行了查找和分析,最终得出是由于器件选用时考虑不周导致信号在高温出现时序判读错误,由此及时解决了问题并从中获得宝贵经验和启示。     

Analysis of some critical aspects in hot machining of Ti-5553 superalloy: Experimental and FE analysis

In this study, a newly developed titanium superalloy, i.e., the Ti-5553 alloy has used for hot machining. This material replaced Ti-grade-5 alloy in the application of aerospace, automobile, and biomedical sector. However, similar to Ti-grade-5 alloy, the Ti-5553 alloy has a low thermal conductivity which makes it difficult-to-cut material categories hence, high tool wear, cutting force and bad surface finish. Hot machining of Ti-5553 has been studied at different machining condition (room and hot) using Deform-2D finite element analysis. The result from the simulation test was compared with the experimental value and reduction of cutting and thrust forces was observed. The experiment was carried out with the same input parameters as simulation, and good coherence between them observed. Additionally, cutting zone temperature, effective stress, etc. for both room and elevated the temperature are also discussed.     

小波分析在混沌信号识别中的应用研究

通过分析混沌信号和噪声信号的频谱特性以及小波变换对两种信号的作用结果的差异,论证了小波变换是一种有效的去除混沌信号中噪声成分的方法.通过数值仿真研究,证明了小波方法的有效性.最后给出了实验结果.     

可靠性强化试验与加速寿命试验综述

介绍可靠性强化试验与加速寿命试验的基本概念 ,并进一步综述强化试验与加速寿命试验的国内外研究现状 ,最后对强化试验与加速寿命试验领域可能的研究方向进行归纳总结。     

Mean residual life of coherent systems consisting of multiple types of dependent components

Mean residual life is a useful dynamic characteristic to study reliability of a system. It has been widely considered in the literature not only for single unit systems but also for coherent systems. This article is concerned with the study of mean residual life for a coherent system that consists of multiple types of dependent components. In particular, the survival signature based generalized mixture representation is obtained for the survival function of a coherent system and it is used to evaluate the mean residual life function. Furthermore, two mean residual life functions under different conditional events on components’ lifetimes are also defined and studied.     

关于ADC法评估C~4ISR系统效能中的可靠性

针对运用ADC法评估防空C4ISR系统效能中,可靠性是影响系统效能的重要因素,对C4ISR系统的可靠性进行研究,重点分析了软件及通信网可靠性的估算公式,并在此基础上建立可用性A和可信性D数学模型.最后,通过实例分析证明了可靠性对系统效能评估的重要影响.     

空间目标RCS序列的R/S分析

RCS包含了目标丰富的信息.分析了空间目标RCS序列产生混沌的机理,并非线性理论中的功率谱法引入空间目标RCS序列的分析中,用重整标度分析法(R/S)分析了空间目标RCS序列的混沌特性,仿真结果表明,与旋转目标相比,三轴稳定目标RCS序列较复杂和不规则,这与实际分析的情况相符合,证明了该方法的有效性.     

存在工作历程产品的加速寿命试验统计分析

加速寿命试验(ALT)可在较短时间内获得产品的寿命及可靠性信息.利用ALT对产品的剩余寿命进行评估时,常常将已工作过的产品进行抽样并投入试验,在这一类样本的ALT数据统计分析时如何处理初始工作时间,成为ALT应用中的一个重要问题.工程实际中评估此类样本的剩余寿命时常常忽略初始工作时间,将其视为"用后如新"或"无记忆性"产品.但此假设必须以产品寿命服从指数分布为前提,而大部分机电产品的寿命服从Weibull分布,因而该方法在应用时必然会产生较大误差.针对这一问题提出了一种新的基于时间折算的ALT数据统计分析方法,并利用Monte Carlo仿真对其估计特性进行对比研究,结果表明此方法能有效评估存在初始工作历程产品的剩余寿命,估计精度优于原方法.     

铁磁材料裂纹漏磁信号的定量检测

针对无损探伤难于实现定量检测的问题,探讨了基于模式识别进行铁磁材料裂纹漏磁信号定量分析的原理和方法,通过在标准试件上的大量实验及在具有自然裂纹的工件上实际检测,取得了满意效果。