基于单片机的弹药仓库通风系统设计

针对温湿度对弹药储存的影响,介绍了通风降湿的重要性及其原理,并在现有地面仓库结构的基础上,设计了一套根据库内外湿度的变化,以及预定降湿条件自动进行通风降湿的系统,并对系统的结构原理和软件进行了分析设计。     

一种用于ESD测试的PLC单轴运动控制台研究

研制了一种以可编程控制器 (PLC) 作为控制单元的单轴控制台。这种单轴控制台有效控制了静电放电(ESD) 模拟器空气放电电极的运动状态, 为ESD测试实验提供了一种新的手段, 并与手持放电方式进行了实验比较。     

改进的斜投影极化滤波方法

针对脉冲体制雷达抗干扰的需求,综合利用卡尔曼滤波技术、斜投影极化滤波技术和时域对消技术,研究了一种改进的斜投影极化抗干扰方法．首先利用卡尔曼滤波技术估计干扰的极化状态参数,在目标极化状态未知的情况下求得斜投影算子,再利用求得的斜投影算子提取出干扰信号,然后利用时域对消技术将原始信号减去干扰信号即得到纯净的目标信号．仿真结果表明,卡尔曼滤波技术可快速准确地估计出于扰极化参数,改进的斜投影极化滤波方法可大幅度抑制干扰,并保持了目标信号的幅度和相位不变性．     

基于马尔可夫过程的介电函数理论研究

基于马尔可夫过程,研究电介质分别在阶跃电场、方波电场和交变电场条件下的极化过程,并给出了介电函数的一般表达式．     

Batch scheduling with step‐deteriorating processing times to minimize flowtime

Both topics of batch scheduling and of scheduling deteriorating jobs have been very popular among researchers in the last two decades. In this article, we study a model combining these two topics. We consider a classical batch scheduling model with unit‐jobs and batch‐independent setup times, and a model of step‐deterioration of processing times. The objective function is minimum flowtime. The optimal solution of the relaxed version (allowing non‐integer batch sizes) is shown to have a unique structure consisting of two consecutive decreasing arithmetic sequences of batch sizes. We also introduce a simple and efficient rounding procedure that guarantees integer batch sizes. The entire solution procedure requires an effort of O(n) (where nis the number of jobs.) © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

一种单平台的无源被动定位算法

提出了一种对匀速扫描雷达的单站被动定位方法 ,主要论述了该定位方法的数学模型 ,仿真分析结果表明该算法有较好的定位精度     

单片机系统常用软硬件抗干扰措施

抗干扰性能是微机系统可靠性的重要指标,抗干扰设计是单片机系统研制中不容忽视的重要内容。单片机系统的可靠性由多种因素决定,从干扰的来源和途径,分析干扰对单片机主要硬件CPU、SFR、RAM、ROM及软件的影响,探索抗干扰的原理和设计方法。提出从电源、输入通道、印制板电路加强硬件抗干扰;通过开机自检、掉电保护、睡眠抗干扰及"看门狗"等技术,采用指令冗余和软件陷阱等软件措施,及时发现干扰导致的错误,使系统尽快恢复正常或及时报警,最大限度降低干扰对系统的影响,有效提高单片机系统在恶劣工况下运行的可靠性。     

基于测试码并行的同步时序电路故障模拟方法

将组合电路故障模拟的一些加速技术推广到时序电路故障模拟中,提出并实现了一个功能块级的基于测试码并行的同步时序电路故障模拟方法,对部分ISCAS89 Benchmark电路的模拟结果表明,该故障模拟方法有较好的性能.     

Single machine sequencing with linear models of release dates

The paper deals with a problem of scheduling a set of jobs on a single machine. Before a job is released for processing, it must undergo some preprocessing treatment that consumes resources. It is assumed that the release date of a job is a linear decreasing continuous function of the amount of a locally and globally constrained, continuously divisible resource (e.g., energy, catalyzer, financial outlay, gas). The problem is to find a sequence of jobs and a resource allocation that will minimize the maximum job completion time. Such a problem appears, for example, in the ingot preheating and hot-rolling process in steel mills. It is shown that the problem is strongly NP-hard. Some polynomially solvable cases of the problem and approximate algorithms with both experimental and worst-case analysis are presented. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 99–113, 1998     

一种慢波自由电子激光的动力学理论分析

本文用动力学耦合模理论,研究在矩形波导中单侧填充介质而形成的慢波线极化自由电子激光的特性。结果表明,在这一系统中,可用低能电子束产生高频率高增益的自由电子激光,并具有极宽的调谐域。