光纤在遥控武器站火控系统中的应用

通过对光纤及光纤通讯关键技术和设备的介绍,提出在遥控武器站火控系统中利用光纤传输方式实现系统高速、高带宽视频、总线、IO信号的传输方式。通过光电转换单元的模块化设计,与系统部件有效集成,减少部件数量,优化系统网络。基于CPLD技术的电路设计,有效减小电路板尺寸,缩短设计周期,提高工作可靠性。设计紧凑、合理的光纤旋转连接器及光纤链路形式,有效保证链路的插入损耗,高质量完成信息传输。运用时分复用/解复用技术拓展传输带宽,为系统的升级和扩展预留了充分的空间。结合工程实际提出光纤通讯目前存在的主要问题并给出相应的解决方案。     

长杆射弹侵彻三种混凝土靶的实验研究

为了研究钻地武器的侵彻性能,在57mm口径的气炮上发射长杆射弹对三种靶体进行模拟侵彻实验。靶体为水泥砂浆石靶、钢纤维混凝土靶和含单层密排刚玉球的钢纤维混凝土靶。实验结果表明,弹头形状对侵彻深度有明显影响;当长杆射弹和撞击速度都相同时,与侵彻钢纤维混凝土靶相比,含单层密排刚玉球的钢纤维混凝土靶中的侵彻深度大约降低了11%,而水泥砂浆石靶中的侵彻深度增加了12%。     

激光二极管与单模光纤自动对准搜索算法

针对激光二极管与单模光纤的自动对准,从搜索路径规划和参数选择出发,给出五自由度自动对准搜索算法解决方案,为了提高搜索效率,提出新的指数函数拟合算法应用到XY平面的搜索过程中,给出了算法的基本原理和实现方法。实验证明,与爬山法相比,这种算法由于减少了采样点数而缩短了搜索时间,从而提高了自动对准的速度。     

火灾条件下钢结构材料的力掌性能研究

通过万能材料试验机 ,对建筑中常用的Q2 35钢在火灾条件下的力学性能进行了研究 ,获得了Q2 35钢的屈服强度、极限强度、弹性模量、极限应变等力学性能指标随火灾温度变化的规律 ,并对影响Q2 35钢力学性能指标的因素进行了分析     

Models and algorithms for shuffling problems in steel plants

In this article, we study item shuffling (IS) problems arising in the logistics system of steel production. An IS problem here is to optimize shuffling operations needed in retrieving a sequence of steel items from a warehouse served by a crane. There are two types of such problems, plate shuffling problems (PSP) and coil shuffling problems (CSP), considering the item shapes. The PSP is modeled as a container storage location assignment problem. For CSP, a novel linear integer programming model is formulated considering the practical stacking and shuffling features. Several valid inequalities are constructed to accelerate the solving of the models. Some properties of optimal solutions of PSP and CSP are also derived. Because of the strong NP‐hardness of the problems, we consider some special cases of them and propose polynomial time algorithms to obtain optimal solutions for these cases. A greedy heuristic is proposed to solve the general problems and its worst‐case performances on both PSP and CSP are analyzed. A tabu search (TS) method with a tabu list of variable length is proposed to further improve the heuristic solutions. Without considering the crane traveling distance, we then construct a rolling variable horizon heuristic for the problems. Numerical experiments show that the proposed heuristic algorithms and the TS method are effective. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

大温差条件下碳纤维混凝土无约束变形试验

为了研究碳纤维、聚酯纤维对混凝土在自由条件下的约束作用,通过设计对碳纤维混凝土、聚酯纤维混凝土和素混凝土加热放热试验,比较掺入不同纤维体积分数的纤维混凝土在大温差条件下无约束自由变形的差异,并用温度线膨胀系数表达。对试验数据进行分析,得到体积分数为1%的碳纤维混凝土比素混凝土抗自由变形能力提高了38.8%,在本试验的各种体积分数中效果最好。结果表明碳纤维与混凝土,虽然热力学性能不同,但是二者结合之后碳纤维因其高弹性模量的特性,反而可以更好地抑制混凝土自由变形。试验效果也表明,随着施工工艺的完善,碳纤维体积分数可能会超过1%,碳纤维对混凝土性能的提升仍然有很大的帮助。     

Opening behavior of PELE perforation on reinforced concrete target

Impact velocity (v0), target strength (fc) and target thickness (hc) are important factors affecting opening damage ((D)) of PELE penetration into RC target. In this paper, based on the three influence factors of v0, fc and hc, experimental and numerical simulation studies on PELE penetration into RC target were carried out. The study results show that: (1) Since interaction force (or penetration resistance) between pro-jectile and target is positively correlated with v0 and fc, with the increase of v0 and fc, deformation mode of jacket is changed from small bending deformation to large bending deformation and then to curling deformation. Therefore, the variation of jacket deformation mode causes opening diameter of RC target to increase first and then to decrease. It is found that the two factors approximately satisfy a quadratic function relationship, respectively. (2) For PELE projectile penetrating RC targets with thickness of 80—400 mm, the opening diameter of six sets of RC targets grows from 240 to 500 mm, and hc with (D) approximately satisfy a linear relationship. (3) Based on the above study results, the relationship be-tween two dimensionless parameters (I= (mv20/d31fc) and H= hc/l ) and dimensionless opening diameter ((D)/d1) was determined. Combined with the results of previous research, a dimensionless opening diameter model (D)/d1=f1(Q,G,I)f2(H) was established. By tests verified, the test results are all within ±10％error of the theoretical model, which verifies the accuracy of the model.     

激光辐照下45#钢板响应特性

采取实验和数值模拟相结合的方法对激光辐照45#钢板的响应特性进行研究。基于连续光纤激光发射系统,开展钢板的激光辐照实验,得到温度场分布及靶板的烧蚀穿孔特性;基于ANSYS建立靶板有限元模型,模拟激光辐照下靶板的热响应过程,得到了靶板厚度、激光功率和光斑直径等因素对靶板温度分布及靶板穿孔特性的影响规律。     

火场中的金属变形及其在火灾勘查中的证明作用

火场当中,钢质材料的存在形式很多,常见的有五种特殊存在形式竖直承重、竖直不承重、竖直悬挂、水平悬空和水平放置.研究钢质材料这五种存在形式在火场当中的变形,有助于对起火点的认定和火灾发展蔓延方向的分析.     

光纤陀螺仪(FOG)技术及发展应用

介绍了当前惯性导航领域一门新型技术光纤陀螺仪(FOG)的基本原理、类型及两种典型光纤陀螺仪的结构,分析了光纤陀螺仪的误差及消除误差的方法,通过介绍光纤陀螺技术发展的过程及世界各主要国家在光纤陀螺实用化方面取得的进展,指出了光纤陀螺仪与其它光学陀螺相比具有的优点及良好的发展前景。