一种改进的混合BLISS多学科设计优化方法

针对BLISS 2000优化过程中权值系数的引入给实际应用带来的困难,提出一种改进的BLISS优化过程——混合BLISS( Hybrid BLISS,HBLISS).该方法在保持BLISS 2000的基本算法结构的基础上取消权值系数,利用耦合变量的最小残差协调子系统级和系统级优化,给出了HBLISS的算法结构和基本流程...     

拉应力对管线钢磁导率及磁记忆信号的影响

运用数值模拟方法,对不同拉应力作用下X60管线钢的相对磁导率μσ的变化情况进行了仿真.结果表明,加载初期试件处于弹性变形阶段时,μσ值变化较大,随应力的增大μσ值迅速减小;加载超过屈服点后,μσ值变化很小,应力的增大已不再对其产生显著影响.磁记忆检测试验表明,进入塑性变形阶段后,信号曲线亦会由起初无规律性分布发展到相近...     

基于强跟踪扩展Kalman滤波的X射线脉冲星导航定轨精度研究

为提高X射线脉冲星导航定轨精度,依据脉冲星导航原理,建立了X射线脉冲星自主导航系统的状态方程和观测方程,提出用强跟踪扩展Kalman滤波（Strong Tracking Extended Kalman Filter,STEKF）替代扩展Kalman滤波,并对3颗脉冲星卫星运行的位置和速度估计进行了仿真实验。仿真结果表明：STEKF具有使滤波器能够自适应地校正估计偏差并迅速跟踪状态变化的能力,有效地提高了卫星运动状态的估计精度和数值稳定性。     

反对称铺层碳纤维复合材料圆柱壳的双稳态应力特性

双稳态复合材料可广泛应用于各类可变结构的设计。针对反对称铺层的圆柱壳,利用有限元软件ABAQUS的Standard准静态分析,模拟其双稳态跳变过程和跳回过程,探讨在整个连续过程中圆柱壳上的应力分布情况,以及应力随时间和载荷变化的趋势,从而对该类可变结构的设计起到指导作用。结果表明:该类复合材料圆柱壳跳变过程中最大应力出现在载荷施加点与约束点附近,第二稳态下应力关于板中心呈中心对称分布,最大应力沿板壳对角线出现在四个角内侧附近,而跳回过程中应力由第二稳态下的分布慢慢变为集中在约束点附近。而且整个圆柱壳上的最大应力时刻与最大载荷施加的时刻不重叠,具有滞后性。     

A Fuzzy Cluster and Retinex Theory-based Variation Model for Inhomogenous Image Segmentation

A variational inhomogeneous image segmentation model based on fuzzy membership functions and Retinex theory is proposed by introducing the fuzzy membership function.The existence of the solution of the proposed model is proved theoretically.A valid algorithm is designed to make numerical solution of the model under the framework of alternating minimization.The last experimental results show that the model can make segmentation of the real image with intensity inhomogeneity effectively.     

Size dependent free vibration analysis of functionally graded piezoelectric micro/nano shell based on modified couple stress theory with considering thickness stretching effect

Higher-order shear and normal deformation theory is used in this paper to account thickness stretching effect for free vibration analysis of the cylindrical micro/nano shell subjected to an applied voltage and uniform temperature rising. Size dependency is included in governing equations based on the modified couple stress theory. Hamilton's principle is used to derive governing equations of the cylindrical micro/nano shell. Solution procedure is developed using Navier technique for simply-supported boundary conditions. The numerical results are presented to investigate the effect of significant parameters such as some dimensionless geometric parameters, material properties, applied voltages and temperature rising on the free vibration responses.     

An improved adaptive differential evolution algorithm for single unmanned aerial vehicle multitasking

Single unmanned aerial vehicle (UAV) multitasking plays an important role in multiple UAVs cooperative control, which is as well as the most complicated and hardest part. This paper establishes a three-dimensional topographical map, and an improved adaptive differential evolution (IADE) algorithm is proposed for single UAV multitasking. As an optimized problem, the efficiency of using standard differential evolution to obtain the global optimal solution is very low to avoid this problem. Therefore, the algorithm adopts the mutation factor and crossover factor into dynamic adaptive functions, which makes the crossover factor and variation factor can be adjusted with the number of population iteration and individual fitness value, letting the algorithm exploration and development more reasonable. The experimental results implicate that the IADE algorithm has better performance, higher convergence and efficiency to solve the multitasking problem compared with other algorithms.     

预报风强度对火箭最大气动载荷精度影响及建模分析

针对不同预报风强度的精度以及其对应的最大气动载荷预报值精度的研究文献极少。以某地区实况风为基准,分别对不同预报风强度的精度以及其对应的最大气动载荷预报值精度特征进行了分析,并利用多元线性回归方法建立了订正模型,结果表明在预报日数第1～11天,预报风强度越大,预报风精度及其对应的最大气动载荷预报值精度越高;利用多元线性回归方法可提高最大气动载荷预报值精度,且预报风强度越小,最大气动载荷预报精度提高越明显。这些发现在火箭发射前的飞行保障及安全决策方面具有参考价值。     

基于应变测量法的几种典型悬臂梁的挠度测量

挠度变形是工程梁设计中的一项重要指标,为了更加准确地测量梁的挠度变形,提出了采用应变式传感器进行挠度测量的方法对几种典型的悬臂梁的挠度进行测量,该方法是利用挠度与外载荷(外力偶)、弯矩与应力、应力应变之间的关系,导出梁的挠度与应变之间的关系,从而由测得的应变得出悬臂梁在外载荷作用下的挠度。测量结果表明该测量方法测得的结果大大地提高了挠度测量精度。     

基于虚拟样机技术的坦克扭力轴疲劳强度分析

采用虚拟样机技术,应用ADAMS软件中的ATV履带车辆工具箱、实体建模软件(SolidWorks)和有限元分析软件(Patran和Nastran),对柔性化的坦克悬挂系统扭力轴在动载荷工况下的疲劳强度进行了分析,找出了扭力轴的薄弱环节。