马尔可夫随机场中应用蚁群系统的红外图像分割

利用蚁群系统(ACS)的信息正反馈和启发式的搜索特点,针对马尔可夫随机场(MRF)图像模型的局部相关特性和最大后验概率(MAP)估计,可以在较短时间内得到图像分割目标函数的全局最优解,从而可以避免传统模拟退火算法的庞大时间复杂度.通过对军用红外图像的分割实验,可以看出这种算法能够在抗噪声、保留目标边缘和降低时间复杂度方面得到较满意的结果.     

红外脉冲强光辐射产生技术研究

定向红外脉冲强光辐射技术是定向红外对抗中的关键技术,主要用来破坏敌方精确制导武器或C4I系统的红外传感器。本文进行了三种产生技术的研究,即爆炸激励惰性气体,多丝电爆激励惰性气体和多点同步爆燃药物。在同步爆燃产生技术的研究中,当有效载荷弹药为0.2kg时,在距离源50m处得到三个波段(1～3、3～5、8～12μm)的辐射强度为(2.00～3.55)×l05W／Sr,脉冲半高宽为约20ms的强红外辐射脉冲。     

Review of Infrared signature suppression systems using optical blocking method

With rapid advancements in Infra-Red (IR) detection techniques, the range from where the IR-guided missiles are able to lock the target aircraft has increased. To avoid the detection and tracking by modern IR-guided missiles, the aircraft and helicopters also demand progress in its stealth techniques. Hence, study of Infra-Red Signature Suppression (IRSS) systems in aircraft and helicopters has become vital even in design stage. Optical blocking (masking) is one of the effective IRSS techniques used to block the Line-Of-Sight (LOS) of the hot engine parts of the exhaust geometry. This paper reviews the various patents on IR signature suppression systems based on the optical blocking method or a combination of IRSS techniques. The performance penalties generated due to installation of various IRSS methods in aircraft and helicopters are also discussed.     

脉冲电抗器结构应力测量

为了对高压脉冲放电时电抗器结构受力及电流密度分布规律进行分析,使用电阻应变片对电抗器铜带进行应力测量。利用厚壁筒受压模型对应力测量系统的结果进行计算,设计内置气囊增压法来等效铜带上的应力对测量系统进行标定,并对标定实验数据进行验证。使用半桥补偿电路、屏蔽线及电桥盒共地的方法来减小脉冲电磁干扰及测量回路中寄生电阻和电容带来的电气干扰。实验结果表明:同一测量点处的环向应变峰值比轴向应变峰值大,边缘处的应变大于中心处的,需要在电抗器铜带边缘处加强外包约束。根据应力测量结果推断:铜带边缘处电流密度约为中心处电流密度的1.2倍。     

Convolutions and generalization of logconcavity: Implications and applications

Additive convolution of unimodal and α‐unimodal random variables are known as an old classic problem which has attracted the attention of many authors in theory and applied fields. Another type of convolution, called multiplicative convolution, is rather younger. In this article, we first focus on this newer concept and obtain several useful results in which the most important ones is that if is logconcave then so are and for some suitable increasing functions ?. This result contains and as two more important special cases. Furthermore, one table including more applied distributions comparing logconcavity of f(x) and and two comprehensive implications charts are provided. Then, these fundamental results are applied to aging properties, existence of moments and several kinds of ordered random variables. Multiplicative strong unimodality in the discrete case is also introduced and its properties are investigated. In the second part of the article, some refinements are made for additive convolutions. A remaining open problem is completed and a conjecture concerning convolution of discrete α‐unimodal distributions is settled. Then, we shall show that an existing result regarding convolution of symmetric discrete unimodal distributions is not correct and an easy alternative proof is presented. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 109–123, 2016     

激光制备多层结构的软质基底耐磨类金刚石膜

为提高金属铜软基底的耐磨、抗蚀能力,采用脉冲激光沉积技术制备了金属铜基底上的多层结构类金刚石保护膜;其中的碳化硅-类金刚石循环层避免了类金刚石膜层中内应力的累积,降低了功能类金刚石层破裂的风险,碳化硅持力层降低了软质铜基底与高硬度类金刚石层的硬度差,金属钛层则使得铜基底与上层碳化硅层牢固结合。实验测试表明,多层结构类金刚石保护膜在铜基底上附着牢固,可通过美军标MIL-48497A规定的重摩擦和国军标GJB150.5A-2009规定的高低温冲击试验,同时能够承受弱碱溶液的腐蚀;摩擦系数低、处于0.093以下,耐磨性能好、2 h摩擦未见磨痕。针对不同金属基底特性改进工艺,该技术可应用于存在腐蚀性环境中机械工具的抗磨保护膜。     

用于射频/红外复合制导半实物仿真的波束组合器

射频/红外双模复合制导技术的不断发展引发了对射频/红外双模复合制导半实物仿真系统的需求,而波束组合器是半实物仿真系统的关键部件。讨论了波束组合器技术以及波束组合器对单脉冲雷达测角精度影响的测试方法。     

特殊半鞅的强大数定律

利用特殊半鞅的收敛定理和一般形式的Kronecker引理,给出了特殊半鞅和非负特殊半鞅强大数定律的一般形式,推广和完善了已有的结果.     

一种新型近红外脉冲强光辐射源的探索

探索了一种产生近红外脉冲强光辐射的新途径。用冲击大电流使铜丝爆炸产生圆柱式内爆冲击波 ,冲击压缩惰性气体 ,产生等离子体辐射近红外脉冲强光。实验表明 ,用这种方法已经得到了总功率为MW量级 ,脉宽为 1 0 μs量级的近红外脉冲强光辐射     

参数估计的质量评定

本文综述了参数估计的种种标准,特别介绍了推广意义下的强、弱一致性。这些推广意义下的新标准,可以扩展传统标准的应用范围。并给予了实例论证。