Dynamic parameters of multi-cabin protective structure subjected to low-impact load – Numerical and experimental investigations

The dynamic response of a multi-cabin protective structure subjected to impact load directly affects the protective performance of materials; thus, studying the dynamic response and communication law of wave effect of the load plays an important role in the prediction of protective performance. In this study, the protection experiments of box-structure under air- and/or water-medium are conducted, the dynamic response of the structure subjected to low-impact load is analyzed, and the corresponding numerical simulations are analyzed using the theory of finite element method (FEM). Combined with experimental and FEM simulations, the shock strain distribution, acceleration attenuation, and signal energy in defensive materials are determined. Based on the results, the metal structure exhibits good absorption characteristics for shock vibration. Using the experimental data, we also show that the attenuation of shock wave in water medium should be significantly better than that in air medium, and the protective structure should be designed for a combination of water and air mediums. Meanwhile, the numerical simulation can provide a quantitative analysis process for dynamic analysis of defensive materials.     

Ni-Co-P／导电聚苯胺复合材料电磁和红外性能

采用化学镀对高氯酸掺杂聚苯胺（PANI/HClO4）粉体进行Ni-Co-P合金化改性,改性材料磁损耗因子得到提高。进行红外光谱分析,PANI/HClO4在3-5μm和8-14μm 2个大气窗口没有强吸收峰,具有雷达红外隐身兼容特性。     

材料力学性能纳米压入测试仪器发展综述

综述了材料力学性能纳米压入测试仪器的发展现状。阐述了纳米压入测试技术的发展历程;从驱动、载荷测量和位移测量3方面对目前材料力学性能纳米压入测试仪器的基本结构进行了比较分析;介绍了材料力学性能纳米压入测试仪器集成技术,包括影响压入深度测量精度的集成技术、观测技术、大载荷模块和高温试验模块等;最后,对未来材料力学性能纳米压力测试仪器的发展趋势作了展望。     

激光制备高附着性能的铜基类金刚石膜

提升类金刚石(Diamond-Like Carbon, DLC)膜在被保护基底上的附着能力具有明显的实际应用价值。从微观机理上分析了前期设计的Cu基多层DLC膜有效性的原因。在此基础上,研究了DLC/SiC循环层中两者厚度比例对膜层的附着性能、纳米硬度和耐磨性的影响,以优化结构、进一步提升实际应用所需的膜层性能。纳米划痕和压痕测试结果表明:随着DLC层与SiC层厚度比例的增大,多层DLC膜在Cu基上附着性能逐渐降低,但当厚度比小于2.3时,仍接近厚度400 nm的单层DLC膜在Si基上的附着性能；Cu基多层DLC膜的纳米硬度逐渐提高,同时,耐磨性接近纯DLC膜。     

人员交通类场所人员荷载研究

对人员交通类场所的特点进行了分析，将人员交通类场所归纳为简单通道、复杂通道、候机（车）厅、进出港厅等组件。针对简单通道和进出港厅，采用“人员流量法”和“人员密度法”两种方法计算人员荷载；针对复杂通道，采用空间上分解为流线、时间上分解为阶段的方法计算人员荷载；针对候机（车）厅，按照设计容量确定人员荷载。并给出了一个包括国家铁路、地铁的综合交通枢纽换乘层人员荷载计算的典型案例。     

Effects of jute fibre content on the mechanical and dynamic mechanical properties of the composites in structural applications

Due to notable characteristics, sustainability concept and environmental issues, hybridisation natural with synthetic fibres to fabricate composites have been rapidly gaining market share in different applications (structural, military, aerospace and automotive vehicles). Compression, tension and fatigue tests of various stacking sequences of plain jute/carbon reinforced (PVB) polyvinyl butyral by hot hydraulic press technique were experimentally conducted. Six types of fabricated composites with various constituents (jute, carbon and their hybrids) were fabricated and tested. Notably, fatigue lifetime of hybrids increases with increasing the carbon content relative to the jute fibre content. On the other hand, Jute composites possess high strain compared to pure carbon composite, which gives an overall improvement in mechanical behaviours. Interestingly, H1 hybrid with Carbon/Jute/Carbon sequences offers similar fatigue stiffness behaviour of H3 hybrid with Carbon/Jute/Carbon/Jute sequences when subjected to cyclic loading. Carbon composite (C) exhibited the highest fatigue resistance, whiles jute composite (J) possessed the highest strain and semi brittle trends in both mechanical and fatigue performance. Results concluded that plain jute fibres could partially replace high-cost synthetic carbon fibres to produce more eco-friendly hybrids to be utilised in different composites industries.     

Responses of HFR-LWC beams under close-range blast loadings accompanying membrane action

The load-carrying capacities and failure patterns of reinforced concrete components can be significantly changed by membrane effects. However, limited work has been carried out to investigate the blast resistance of Hybrid Fiber Reinforced Lightweight Aggregate Concrete (HFR-LWC) members accompanying membrane action. This paper presents a theoretical approach to quantitatively depicting the membrane behavior and its contribution on the behavior of HFR-LWC beams under close-range blast loadings, and the suitability of the proposed model is validated by a series of field tests. An improved Single-Degree-of-Freedom (SDOF) model was employed to describe the dynamic responses of beam-like members under blast loadings accompanying membrane action, where the mass-load coefficient is determined according to the nonuniformly distributed load induced by close-range explosion, and the membrane action is characterized by an in-plane (longitudinal) force and a resisting moment. The elasto-plastic and recovery responses of HFR-LWC beams under the combined action of blast load and membrane force were analyzed by the promoted model. A specially built end-constrain clamp was developed to provide membrane action for the beam member when they are subjected to blast load simultaneously. It is demonstrated that the analytical displacement-time histories are in good agreement with experimental results before peak deflections and that the improved SDOF model is an acceptable tool for predicting the behavior of HFR-LWC beams under blast loadings accompanying membrane action.     

FeAlCrNbB金属间化合物复合涂层的制备与表征

研究开发了一种FeAlCrNbB新型喷涂粉芯丝材,并结合自动化高速电弧喷涂工艺制备了该材料的复合涂层,分析了涂层的常规力学性能、组织结构和油润滑条件下的滑动摩擦磨损性能,并和常规FeAl涂层进行了对比。结果显示:FeAlCrNbB涂层具有相对较高的显微硬度和拉伸结合强度、低的孔隙率,组织致密,形成了由Fe-Al金属间化合物相、氧化物以及少量非晶和纳米晶组成的复合结构,由于这种复合结构的材料特征,使涂层具备较好的耐磨损性能。