Reclaiming the local in EU peacebuilding: Effectiveness,ownership, and resistance

ABSTRACT

Since the early 2000s, the “local turn” has thoroughly transformed the field of peacebuilding. The European Union (EU) policy discourse on peacebuilding has also aligned with this trend, with an increasing number of EU policy statements insisting on the importance of “the local.” However, most studies on EU peacebuilding still adopt a top-down approach and focus on institutions, capabilities, and decision-making at the EU level. This special issue contributes to the literature by focusing on bottom-up and local dynamics of EU peacebuilding. After outlining the rationale and the scope of the special issue, this article discusses the local turn in international peacebuilding and identifies several interrelated concepts relevant to theorizing the role of the local, specifically those of effectiveness, ownership, and resistance. In the conclusion, we summarize the key contributions of this special issue and suggest some avenues for further research.     

铁基非晶纳米晶涂层的耐磨性研究

采用基于机器人的自动化高速电弧喷涂技术在45钢基体上制备了FeCrBSiMnNbY非晶纳米晶涂层。研究了非晶纳米晶涂层在油润滑条件下，不同磨损时间、速度、载荷对涂层的磨损行为。采用扫描电镜（SEM）、能谱分析仪（EDAX）和X射线衍射仪（XRD）对涂层的组织结构进行了表征，利用纳米压痕仪对涂层的力学性能进行了分析，摩擦磨损试验在MM200滑块磨损试验机上进行。结果表明：涂层组织均匀，结构致密，主要由非晶相和α-Fe相纳米晶组成；在相同磨损试验条件下，非晶纳米晶涂层的相对耐磨性为3Cr13涂层的4．6倍，磨损机制主要为脆性疲劳剥落。     

纳微米材料影响环氧涂层耐磨性的试验研究

为了提高环氧粘涂层的耐磨性,本试验通过在环氧胶粘剂中加入纳、微米填料,研究了纳微米填料对环氧胶粘剂涂层耐磨性的影响规律。试验结果表明,加入纳米级填料环氧胶粘剂涂层的相对耐磨性明显优于微米级填料;加入纳微米复合填料其相对耐磨性为正火态45钢的2.57倍,和纯环氧胶粘剂涂层相比,提高幅度可达2.85倍,而仅加入纳米填料的胶粘剂,其涂层耐磨性只增加了1.97倍。     

Experimental study on explosion dispersion process of a multi-layer composite charge under different initiation modes

The influence of initiation modes on the explosive dispersion process of the multi-layer composite charge (MCC) was studied. Overpressure sensors and high-speed photography system were used to investigate the energy release process of an MCC with a specific structure. The shock wave pressure and explosive dispersion characteristics of the MCC under different initiation modes were compared. The forming and expanding process of the shock wave of the composite charge under different initiation modes was determined. The separation position of the shock wave and fireball interface was determined. The calculation formulas of the shock radius and overpressure of the composite charge are presented. The radius of the shock wave of the composite charge was significantly affected by the initiation mode. Moreover, the development process of the composite explosive fireball under different initiation modes was analyzed, the variation rules of the composite charge dispersion radius and fireball dispersion velocity with time were obtained under the different initiation modes, the explosion energy release rate of composite charge under simultaneous initiation modes was the highest, and the peak overpressure under the simultaneous initiation mode was 1.61 times that of central single-point initiation.     

Non-violent Resistance and Last Resort

It is commonly accepted that recourse to war is justifiable only as a last resort. If a situation can be resolved by less harmful means, then war is unjust. It is also commonly accepted that violent actions in war should be necessary and proportionate. Violent actions in war are unjust if the end towards which those actions are means can be achieved by less harmful means. In this article, I argue that satisfaction of the last resort criterion depends in part upon the likelihood of success of non-violent alternatives to war, and that the actual and potential effectiveness of non-violent resistance means that the last resort criterion of the jus ad bellum and the proportionality criterion of the jus in bello are harder to satisfy than is often presumed.     

AM波在LC电路中的不失真条件

分析AM波通过LC谐振放大器时的不失真条件,提出解决失真的办法.     

末制导雷达干扰决策的模糊评估方法研究

为了适应水面舰艇反导作战的需要 ,提出了一种评估末制导雷达干扰决策的方法。建立了导弹末制导雷达干扰决策评估模型 ,在此基础上 ,运用模糊综合评估的方法 ,对导弹末制导雷达干扰决策进行了综合评估。以干扰某型反舰导弹为例 ,对评估方法进行了试验验证。结果表明 ,该评估方法对评估末制导雷达干扰决策十分有效     

船用电缆绝缘电阻自动检测精度的分析与研究

提出了一种实际的船用电缆绝缘电阻检测方案 ,包括信号变换电路和方案的硬件与软件结构 .分析了检测误差产生的主要原因 ,并提出了两种提高检测精度的措施     

辐射叶加载的短波宽带鞭状天线优化设计

提出一款具有多层辐射叶结构的新型鞭状天线,在10 m鞭状天线体上设置不同的辐射叶层数、半径、长度、分支数、仰角及其分布情况,研究其对天线辐射性能的影响,综合考虑选择一套最合适的辐射叶结构,并为天线进行双加载和宽带匹配网络的算法优化。仿真结果表明,与现有的普通宽带鞭状天线相比,增益和效率得到了普遍提高,在低频段增益最高提高了3 dB,效率最高提高了5%;在高频段增益最高提高了5 dB,效率最高提高了35%,方向图上翘也得到了一定的抑制,为改善现有的宽带鞭状天线提供一种新的结构设计方法。     

基于相关算法超声流量计的研究

为解决开采原油的精确在线计量问题,在对超声波相关流量计原理分析的基础上,重点研究了超声波相关流量算法。采用循环相关算法,有效克服了有限长离散数据线性相关算法所出现的计算失效问题,并以DSP芯片为核心,实现了超声波相关流量测量系统的设计,完成了信息不丢失测量以及对困难流体流量的非接触在线计量。实验方案经油田现场测试,计量误差可以控制在2%以内。