火炮火控系统命中解的分布和存在性

定义了火控系统中问题联立方程应满足的“基本假设”,从理论上讨论了在“基本假设”条件下诸命中解的分布特性 ,证明临近的命中解 (如果存在的话 )是唯一的 ,给出了临近解存在的充分必要条件。用一个简单的实例表出不同目标速度下诸命中解分布的实验数据     

构筑中国新地缘安全战略的理论准备与思考

目前,中国面临的地缘安全挑战已经达到了一个危险的临界点,而对当前挑战的应对却没有表现出整体的成熟。显然,没有适应新形势的完整的地缘安全理论是造成出现不成熟的应对危机举措的重要原因。因此,从理论上突破传统中国地缘安全战略的影响,构筑新的完整的地缘安全理论,是一项紧迫而必须完成的任务。     

就业问题对边防部队思想政治工作的影响

军人就业问题对边防部队思想政治工作有很大的影响 ,必须努力创造良好的军人就业条件 ,打牢部队“打得赢 ,不变质”思想政治工作的基础。     

Dynamic impact protective body armour: A comprehensive appraisal on panel engineering design and its prospective materials

Personal body armour is one of the most important pieces of equipment to protect human beings from various critical and fatal injuries. In today’s modern world, various organizations including law enforcement and security service have made it mandatory for their personnel to wear personal protection system while on field duty. However, the systems should comprise an improved ballistic performance, light-weighted, flexible as well as comfortable panel not only to be accepted with a wider range but also for effective performances of the consumer. Generally, the overall performances of the protective body armour could be affected by various parameters including armour design techniques, type of materials used and finishing of the panels. The current paper aims to critically review state-of-art for armour panel design techniques and the different perspective body armour materials. The paper starts by discussing the different body armour and its category. Later, the different states of technology for armour panel design (mostly for women), its problems and the possible solutions will be cited. Later, the commonly used different polymeric fibrous and the future possible advanced materials including carbon nanotube (CNT), Graphene CNT and shear thickening fluids (STFs) treated materials for developing the reinforced body armour panel will be discussed. The authors believe that this paper will enlighten useful guidelines and procedures about the different panel design techniques and current and promising future materials for researchers, designers, engineers and manufacturers working on the impact resistance body armour field.     

Partial penetration of annular grooved projectiles impacting ductile metal targets

Changing and optimizing the projectile nose shape is an important way to achieve specific ballistic performance. One special ballistic performance is the embedding effect, which can achieve a delayed high-explosive reaction on the target surface. This embedding effect includes a rebound phase that is significantly different from the traditional penetration process. To better study embedment behavior, this study proposed a novel nose shape called an annular grooved projectile and defined its interaction process with the ductile metal plate as partial penetration. Specifically, we conducted a series of low-velocity-ballistic tests in which these steel projectiles were used to strike 16-mm-thick target plates made with 2024-O aluminum alloy. We observed the dynamic evolution characteristics of this aluminum alloy near the impact craters and analyzed these characteristics by corresponding cross-sectional views and numerical simulations. The results indicated that the penetration resistance had a brief decrease that was influenced by its groove structure, but then it increased significantly-that is, the fluctuation of penetration resistance was affected by the irregular nose shape. Moreover, we visualized the distribution of the material in the groove and its inflow process through the rheology lines in microscopic tests and the highlighted mesh lines in simulations. The combination of these phenomena revealed the embed-ment mechanism of the annular grooved projectile and optimized the design of the groove shape to achieve a more firm embedment performance. The embedment was achieved primarily by the target material filled in the groove structure. Therefore, preventing the shear failure that occurred on the filling material was key to achieving this embedding effect.     

Interval uncertain optimization for damping fluctuation of asegmented electromagnetic buffer under intensive impact load

Aiming at the problems of demagnetization effect of electromagnetic buffer (EMB) caused by high ve-locity under intensive impact load and the difficulty and error of machining composite thin-walled long tube, a segmented EMB is proposed. The inner tube and air-gap are divided into initial segments and the traversing segments. Through theoretical analysis, impact test and simulation, it can be found that the RRF curve has two peaks. Firstly, in order to reduce the resultant resistance force (RRF) peaks, the sensitivity analysis based on optimal Latin hypercube design (OLHD) and polynomial regression was performed. The results show that the smallest contribution ratio to the dynamic response is the seventh and ninth segments of the inner tube, which are less than 1％. Then, fully considering the uncertain factors, important parameters are selected for uncertain optimization after sensitivity analysis. The in-terval order and interval probability degree methods are used to establish interval uncertain optimiza-tion model of the RRF considering robustness. The model was solved using an interval nested optimization method based on radial basis function (RBF) neural network. Finally, the Pareto front is obtained and numerical simulation is performed to verify the optimal value. It indicates that the two kinds of RRF peak is obviously reduced, and the optimization object and strategy are effective.     

小子样条件下弹头落点CEP计算方法

针对目前武器射击试验中弹头落点子样小 ,评估其CEP难的特点 ,提出一种简明实用的计算方法 ,由仿真计算表明 ,它比GJB5 2 6A— 98的点估计较优 ,此方法可在工程上予以应用     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.     

许地山小说中宗教救赎的流变

宗教救赎是许地山小说的创作意图和重要特质，它或隐或显地贯穿于许地山的整个小说创作中。他的小说对现实人生和终极理想进行了交错关注，而宗教救赎的意涵也在关注中不断变化。     

M739引信头部触发机构发火模式与判别方法研究

针对M739引信头部机构的基本结构与特性,分析其头部触发机构的发火原理,提出发火模式种类的判别方法。结合某型引信的具体参数,计算其对钢板、胶合板和地面三种不同目标介质射击时的碰击力,分析碰击力、防雨机构静态下移抗力及支筒图定抗力对发火模式的影响。试验结果表明,该发火模式判别方法适用于M739系列引信。