采用3电平非均匀量化的脉冲编码策略

作为全数字发信机系统中广泛应用的一种脉冲编码技术,Delta-Sigma调制(Delta-Sigma Modulation, DSM)通过增加量化电平,能够实现调制性能的提升。但限于全数字发信机系统开关功放的具体结构,多电平DSM序列无法直接驱动后级功放电路。在传统3电平DSM基础上,通过引入面积等效原理和非均匀量化技术,提出了适用于开关功放的一种新的脉冲编码策略。理论分析和仿真结果表明,相比常规2电平DSM序列,采用该策略获得的调制脉冲序列具有更优的带内SNR和编码效率性能。     

电磁发射系统改进FAHP-神经网络健康评估方法

准确定量评估电磁发射系统发射前的健康状态意义重大。针对模糊层次分析方法(Fuzzy Analytic Hierarchy Process, FAHP)在评估电磁发射系统串行结构同级元素健康值时存在较大偏差,且无法适用系统非线性变权重需求的缺陷,提出改进FAHP-神经网络方法。通过在计算同级元素健康指数时构造能够满足串行结构健康评估的非线性函数进行计算,并在数学上证明该方法的有效性；通过引入神经网络系统,在已有的系统先验信息和测量数据的基础上训练模型解决系统健康评估非线性变权重需求。基于电磁发射系统脉冲成形网络系统建立健康评估模型,开展评估试验。结果表明,提出的方法健康评估精度较高,在各种系统健康状态下,评估结果均符合系统实际的健康状况；对比传统的FAHP,提出的改进方法评估精度大幅提升,且在评估试验中没有出现故障误报和漏报的情况,从而验证了提出方法的可行性和工程实用价值。     

Effect of microstructure on short pulse duration shock initiation of TATB and initial response mechanism

Micro-TATB particles with different sizes and 3D nanoporous TATB architectures with different specific surface areas were prepared through recrystallization to study short pulse duration shock initiation properties by electric gun technology. For micro-TATB, the initiation threshold significantly decreases with TATB average size ranging from 79.7 μm to 0.5 μm. For 3D nanoporous TATB architecture, the initiation threshold decreases and then increases with specific surface areas increased from 9.6 m²/g to 36.2 m²/g. The lowest initiation thresholds are obtained for the micro-TATB with average sizes of 1.3 μm and 0.5 μm, and 3D nanoporous TATB architecture with specific surface area of 22.4 m²/g. The shock initiation thresholds of micro-TATB and 3D nanoporous TATB architectures show significantly decreases with the porosity increased. The decomposition reaction and thermal conductivity properties were further investigated to understand the initial response mechanism. High porosity provides more collapse sites to generate high temperature for formation of hot spots. The low thermal conductivity and decomposition temperature could enhance the formation and ignition of the hot spots, and initial decomposition reaction of TATB. The effect of the decomposition temperature is higher than that of the thermal conductivity on the shock initiation properties. The enhanced decomposition reaction could promote energy release and transfer process from the ignition to the combustion. This work offers a new insight to understand the effects of microstructure on the shock initiation properties and the initial response mechanism of TATB.     

针对窄脉冲雷达测角的相位干涉仪仿真研究

以Matlab／simulink为工具，对相位干涉仪快速准确获取窄脉冲目标雷达的角信息问题进行了仿真研究。研究表明，相位干涉仪快速、准确获取窄脉冲目标雷达角信息的基本能力主要取决于鉴相器中低通滤波器截止频率的设计，并给出了截止频率的设计公式。此外，还对读取相关信息的时机和方法等问题进行了研究，给出了相应的解决方案。     

数据采集中脉冲丢失补偿算法

针对测试中遇到的脉冲丢失问题,采用脉冲边沿、脉冲到达时间和脉冲间隔等特征量,设计了快速进行脉冲丢失位置定位和补偿的算法。仿真结果表明,该算法能有效地解决脉冲丢失的问题,对脉冲敏感型的数据分析和故障诊断具有重要意义。     

电磁脉冲武器对抗来袭目标可行性研究

针对电磁脉冲武器独特的毁伤机理,计算了杀伤覆盖区域和辐射到目标处的功率密度等作战能力指标,并以反舰导弹为例分析了强电磁脉冲的耦合途径,通过评估前后门耦合的电磁能量,在理论上论证了用电磁脉冲武器对抗来袭目标的可行性.