Experimental and numerical investigations of interface properties of Ti6Al4V/CP-Ti/Copper composite plate prepared by explosive welding

Explosive welding technique is widely used in many industries. This technique is useful to weld different kinds of metal alloys that are not easily welded by any other welding methods. Interlayer plays an important role to improve the welding quality and control energy loss during the collision process. In this paper, the Ti6Al4V plate was welded with a copper plate in the presence of a commercially pure titanium interlayer. Microstructure details of welded composite plate were observed through optical and scanning electron microscope. Interlayer-base plate interface morphology showed a wavy structure with solid melted regions inside the vortices. Moreover, the energy dispersive spectroscopy analysis in the interlayer-base interface reveals that there are some identified regions of different kinds of chemical equilibrium phases of Cu–Ti, i.e. CuTi, Cu₂Ti, CuTi₂, Cu₄Ti, etc. To study the mechanical properties of composite plates, mechanical tests were conducted, including the tensile test, bending test, shear test and Vickers hardness test. Numerical simulation of explosive welding process was performed with coupled Smooth Particle Hydrodynamic method, Euler and Arbitrary Lagrangian-Eulerian method. The multi-physics process of explosive welding, including detonation, jetting and interface morphology, was observed with simulation. Moreover, simulated plastic strain, temperature and pressure profiles were analysed to understand the welding conditions. Simulated results show that the interlayer base plate interface was created due to the high plastic deformation and localized melting of the parent plates. At the collision point, both alloys behave like fluids, resulting in the formation of a wavy morphology with vortices, which is in good agreement with the experimental results.     

Effect of functionally-graded interphase on the elasto-plastic behavior of nylon-6/clay nanocomposites; a numerical study

In nanocomposites, the interphase thickness may be comparable to the size of nano-particles, and hence, the effect of interphase layers on the mechanical properties of nanocomposites may be substantial. The interphase thickness to the nano-particle size ratio and properties variability across the interphase thickness are the most important affecting parameters on the overall behavior of nanocomposites. In this study, the effect of properties variability across the interphase thickness on the overall elastic and elasto-plastic properties of a polymeric clay nanocomposite (PCN) using a functionally graded (FG) interphase is investigated in detail. The results of the computational homogenization on the mesoscopic level show that Young's modulus variation of the interphase has a significant effect on the overall elastic response of nanocomposites in a higher clay weight ratio (Wt). Moreover, strength variation through the interphase has a notable effect on the elasto-plastic properties of PCNs. Also, the increase or decrease in stiffness of interphase from clay to matrix and vice versa have a similar effect in the overall behavior of nanocomposites.     

一种基于范围表示B树的大容量IPv6路由查表算法

IPv6具有巨大的地址空间,未来要面对的将会是海量IPv6路由表,而且128位的IPv6地址比IPv4需要更多的访存数。算法针对IPv6路由查找问题中的这两个难点,提出利用B树高度较低的优良性质,将前缀转化为范围表保存在B树中,并在结点内部利用分段范围比较树算法来减少访存次数和空间耗费。理论分析和实验表明,该算法能够以很好的性能支持IPv6海量路由表的查找。     

基于对偶四元数的航天器六自由度相对运动输入有界控制

利用对偶四元数的理论来分析航天器六自由度的相对运动,设计了一种考虑输入有界的姿轨一体化控制器。在介绍对偶数和对偶四元数的基础上推导六自由度相对运动的姿轨耦合模型;利用双曲正切函数绝对值小于1的特性来显式地构造有界控制器,分别设计两个相互耦合的自适应调节律来动态地改变控制器的输出,并基于李雅普诺夫稳定性理论严格证明了闭环系统的全局渐近稳定性;利用数学仿真实验来验证该控制器和控制力满足给定的约束条件,能够实现航天器六自由度相对运动的精确稳定控制,并且对模型参数不确定性和外界扰动具有鲁棒性。与其他方法相比,由该控制器计算得到的控制力矩器的收敛速度更快,输出的控制力矩和控制力的最大幅值更小,且消耗的能量也更少。     

基于i.MX6无人机视频码率受控的压缩系统设计

针对无人机数据链视频数据信道带宽受限要求,采用飞思卡尔i.MX6的嵌入式视频处理硬件平台,设计无人机视频H.264压缩码率受控系统,解决压缩编码的运动估计搜索范围、最大关键帧间距问题,在数据传输中采用SPI接口缓冲区码率控制机制,控制系统SPI输出码率受限的设计。实验测试表明,设计的视频处理系统视频压缩数据受控,可根据无人机无线信道设计要求,完成无人机视频压缩编码码率可控视频传输。     

空间机器人抓捕任务的六自由度同步控制逼近策略

利用空间机器人抓捕目标卫星是航天器在轨服务的主要模式之一.针对空间机器人对无控旋转卫星的抓捕逼近问题,为了提高适合抓捕的时间范围,研究了六自由度(6-DOF)同步控制逼近策略.采用修正罗德里格斯参数描述姿态,给出了无控旋转卫星的运动模型;假设空间机器人采用动量轮控制姿态,通过分开处理轨道同步和姿态同步建立了6-DOF同步控制问题模型;考虑惯量参数的不确定性,利用自适应输出反馈控制原理,分别推导了轨道同步和姿态同步跟踪控制律.仿真算例表明在空间机器人惯量参数不确定和摄动作用下可以有效实现同步跟踪.     

LaB6空心阴极中毒特性

LaB_6阴极与其他类型阴极相比具有电子发射电流密度大等优点,已广泛用于电推进、高发射密度电子枪等产品。为了研究LaB_6空心阴极中毒特性、识别LaB_6空心阴极主要失效模式,分别对LaB_6空心阴极暴露大气后性能变化特征和引起性能变化的原因进行了研究。结果表明:LaB_6空心阴极在暴露大气后表面吸附大量中毒气体,出现了发射体表面逸出功增加、发射体短期中毒现象。此时空心阴极的放电电压和阴极顶温度均有所上升,经过短期工作后放电电压和阴极顶温度均恢复初始状态。但LaB_6空心阴极严重中毒后,并不能通过加热和离子轰击方式去除表面生成的氧化物。因此,可以在实验过程中通过监测空心阴极的阴极顶温度和阳极电压变化间接表征空心阴极发射体状态。     

基于6LoWPAN与MQTT的无线传感网络设计

针对目前6LoWPAN无线传感网络设计与应用存在的可扩展性较差、与IPv4环境不兼容等问题，设计并实现了基于6LoWPAN与消息队列遥控传输(Message Queuing Telemetry Transport， MQTT)的无线传感网络。其中，无线传感网络节点作为MQTT客户端与MQTT服务器通信，边界路由器通过NAT64(Network Address Translation IPv6 to IPv4)实现无线传感网络节点与IPv4网络的通信。将所设计的无线传感网络应用到智能家居场景，评估了无线传感网络和边界路由器的性能，测试了系统功能的实现。结果表明，无线传感网络具有良好的连通性和稳定性，无线传感节点的数据上传与指令接收稳定可靠，边界路由器工作稳定，系统具有较好的性能。