Study on energy release characteristics of reactive material casings under explosive loading

Reactive Materials (RMs), a new material with structural and energy release characteristics under shock-induced chemical reactions, are promising in extensive applications in national defense and military fields. They can increase the lethality of warheads due to their dual functionality. This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading. Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs, temperature distribution, peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material (RM) warhead casings by using high-speed camera, infrared thermal imager temperature and peak overpressure testing and scanning electron microscope. Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings. The RM casings can improve the peak overpressure of the air shock wave under explosion loading, though the results are different with different charge ratios. According to the energy release characteristics of the RM, increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave, while reducing the thickness will increase the peak overpressure of the far-field air shock wave.     

【专题】智能化导弹质量检测方法研究

导弹是由各种类型装备组成的综合性很强的复杂系统,智能技术的引入进一步丰富了智能导弹质量特性的内涵,对质量检测和控制提出了更高要求,需要开发与之相适应的检测方法。本文先给出了智能导弹的定义和内涵,分析了其智能特性,接着概述了智能化导弹的结构组成,分析了各智能部件的功能和结构组成,从智能化导弹结构组成及测试参数、智能化部件的嵌入式软件作用、零部件机械加工精度等方面提出了智能化导弹质量检测的需求,并在此基础上结合智能化制造等技术提出了在线检测、自动检测/测试、BIT自检、软件测评技术以及弹载遥测的智能化导弹质量检测途径和方法。     

预报风强度对火箭最大气动载荷精度影响及建模分析

针对不同预报风强度的精度以及其对应的最大气动载荷预报值精度的研究文献极少。以某地区实况风为基准,分别对不同预报风强度的精度以及其对应的最大气动载荷预报值精度特征进行了分析,并利用多元线性回归方法建立了订正模型,结果表明在预报日数第1～11天,预报风强度越大,预报风精度及其对应的最大气动载荷预报值精度越高;利用多元线性回归方法可提高最大气动载荷预报值精度,且预报风强度越小,最大气动载荷预报精度提高越明显。这些发现在火箭发射前的飞行保障及安全决策方面具有参考价值。     

影响柴油机喷雾数值模拟精度的若干因素分析

为探明影响柴油机喷雾数值模拟精度的若干因素,采用通用商业软件FLUENT对柴油机喷雾特性进行了CFD模拟计算,分别研究了网格尺寸、喷雾粒子数和最大时间步长对油束几何形状及油束贯穿距的影响.结果表明,网格划分的精度和喷雾粒子数量的多少对计算结果的正确性和油束的几何形状有直接的影响,网格尺寸过大或喷雾粒子数过少则喷雾几何形状失真.最大时间步长对数值模拟的精度在一定的范围内影响是比较小的.     

中国特色社会主义事业发展布局的创新与发展

十八大首次将经济、政治、文化、社会和生态五大建设并列,强调“五位一体”建设中国特色社会主义。由此,中国特色社会主义发展布局历经四个阶段,即：“一个中心,两个基本点”的战略布局,“三位一体”发展布局,“四位一体”发展布局,“五位一体”发展布局。“五位一体”总体布局是一个相互联系、相互协调、相互促进、相辅相成的有机整体,对于开创中国特色社会主义事业新局面意义重大,为到本世纪中叶基本实现社会主义现代化,提供了有力支撑。     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

雷达信号仿真中箔条干扰回波模型研究

雷达信号仿真是抗干扰算法研究和验证的有效措施。针对箔条干扰随机信号模型难以满足高精度仿真的需要,本文在分析和总结箔条干扰散射特性和运动特性的基础上,对箔条干扰回波模型进行了更深入和精细化的研究。在Matlab平台上通过编程优化克服了复杂计算的问题,并获得了较好的模拟效果。仿真实验表明,该模型可为精确研究箔条干扰提供数据支持。     

空投设备气囊缓冲系统的缓冲特性分析与匹配方法

采用解析分析法,根据排气口流量方程和载荷运动方程建立了无量纲的空投设备气囊缓冲过程数学模型,并根据此模型构造了气囊的匹配设计图。讨论了排气口面积、气囊高度、着陆初速度、载荷质量、气囊底面积及排气口开启压力等参数对气囊缓冲性能的影响,提出了空投设备气囊缓冲系统的参数匹配设计方法,为空投设备气囊缓冲系统的匹配设计提供了技术支持。     

液体火箭发动机气液同轴式喷嘴混合特性实验研究

本文通过实验研究了液体火箭发动机气液同轴离心式喷嘴的混合特性。利用两相探针技术,测量了喷嘴下游喷雾流场中气液流强和混合比分布,考察了喷嘴缩进比和气液喷注压降等参数对混合特性的影响。结果表明,气液同轴离心式喷嘴的缩进比对喷嘴混合特性有较大影响,增大缩进比将导致更窄的气液流强分布和更均匀的混合,而改变气液喷注压降将导致不同的流强和混合比分布规律。     

电扫偶极子相控阵天线的空域极化特性分析

推导了偶极子线性阵列和平面相控阵天线在空域波束电扫时辐射场的极化特性,建立了数学模型。计算结果和仿真分析表明:偶极子相控阵天线辐射场在空域扫描各个波位的极化特性并不一致,是具有一定差异的,当待测目标的方向偏离天线电轴方向时,所接收到的电波极化状态也会随偏离电轴的方向和仰角而改变。该结论对于现代电子战中相控阵天线系统的精确建模与仿真具有重要意义,对于研究和利用天线的极化特性进行雷达极化抗干扰技术是非常必要的。