基于模糊C-划分和3D小波变换的视频编码方法

在传统矢量量化的基础上,引入噪声模型的影响,结合模糊数学理论,提出了一种基于模糊C-划分的混合噪声模型的矢量量化方法,并将其应用到视频编码中。文中视频编码方法采用了运动补偿与3D小波变换相结合。主要对基于模糊C-划分的混合噪声模型的矢量量化进行了分析。实验结果表明,该方法在视频压缩中具有良好的效果。     

基于高低频模型的矢量量化图象编码系统(HL-TVQ)

HL-TVQ 图象编码系统,是在图象的高/低频图象模型基础上,对低频图象分量进行变换矢量量化编码,而对高频图象进行空域欠量量化编码。HL-TVQ 编码系统具有压缩比高(在模拟时达到10),恢复图象的视觉效果好,运算复杂度小的特点。本文详细介绍 HL-TVQ的编码过程和原理。     

引信全电子安全系统失效分析及评估

本文根据全电子安全系统的一般结构模式,分析了其安全性设计的一般特点和可能造成其失效的各种原因,并在此基础上建立了全电子安全系统的失效故障树,给出了失效概率的定量计算结果。     

高超声速飞行器边界层外缘参数仿真分析

以高超声速飞行器为研究对象,构建快速准确计算高超声速飞行器无黏边界层外缘参数的计算方法。拟合空气比热、比热比随温度变化曲线,建立空气属性温度划分准则。基于不同空气属性建立高超声速飞行器边界层外缘参数工程与数值计算模型,采用钝双锥模型,对比分析工程估算、无黏数值及有黏数值计算方法的计算结果。结果表明,0°攻角状态下,基于无黏流场的数值计算与工程估算和有黏数值计算的压强最大差值分别为1.19%和2.39%;10°攻角状态下,最大差值分别为5%和50%;从而证明所提出的无黏数值计算方法明显优于工程计算方法,为进一步快速准确计算高超声速飞行器气动热环境奠定了重要基础。     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

基于聚类算法的多无人机系统任务分配

针对现有任务分配方法在任务点较多时不易解算,且计算量大的问题,提出了基于模糊C-均值聚类算法的多无人机系统任务分配方法.首先,利用模糊C-均值聚类算法得到的隶属度矩阵对任务点进行初始分配;其次,针对基于空间划分聚类可能造成各UAV任务不均衡的问题,设计任务的局部优化调整规则;最后,结合单旅行商问题,利用Tabu Sea...     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

解析美国大学TESL硕士培养的主要课程与设置理据——以曼卡托明尼苏达州立大学为例

把英语作为第二语言的教学是20世纪60年代在美国兴起并逐步走向独立的科目,它在综合相关专业的同时正在朝专业化方向发展。近年来其硕士层面的教育为全球培养了大量合格的中小学英语教师,取得了较好的成绩。本文以曼卡托明尼苏达州立大学英语系为例,并结合笔者在该系攻读TESL硕士学位时的经历,解析其主要课程及设置理据。     

(修，2撤3)关键几何参数对超声速膨胀器流场和性能影响的数值研究

为了揭示关键几何参数对超声速膨胀器流动特性影响的规律,对3种隔板安装角和5种出进口面积比超声速膨胀器设计工况下的流场进行了数值研究。结果表明：随隔板安装角增加,斜激波向出口迁移,斜激波强度略有降低,超声速膨胀器膨胀比减小,效率提高;随出进口面积比增加,流道内高速区显著扩大并逐渐靠近压力面,斜激波增强,出口流动损失增加,超声速膨胀器膨胀比增大,效率降低。为获得综合性能较优超声速膨胀器结构,需在较小出进口面积比和较大隔板安装角之间做折衷选择。     

ISAR雷达欺骗式干扰信号生成算法

宽带ISAR雷达能够从目标回波中计算得出众多目标特征,对ISAR雷达的干扰信号必须高逼真地模拟目标的电磁散射特性和运动特性。从弹头目标电磁散射机理出发,分析了干扰信号生成流程,提出二维成像干扰的实现方案。针对虚假目标特性模拟问题,提出基于一维距离像模板合成欺骗干扰信号的算法。算法采用距离像模板与实际宽带ISAR信号的卷积调制处理,生成的干扰信号能较好地反映目标的电磁特性。通过多个脉冲的模拟,生成的干扰信号也能够准确反映目标的运动特性。仿真实验对暗室测量数据和HRRP模板数据进行成像效果对比,验证了算法的有效性。该算法对二维成像干扰机的工程设计具有指导意义。