短脉冲激光作用下爆发沸腾的温度及汽泡行为研究

采用短脉冲激光加热浸没在丙酮液池的铂薄膜电阻的方法,以及高压电火花单次放电高速照相技术,在国内首次建立了超急速爆发实验台,达到了微秒级的温度频响和2×106帧/s的高速照相.研究发现,随着激光热流密度增加,试件表面温度快速升高到一饱和值,与过热液体的动力学理论极限温度非常接近.拍摄到了与常规沸腾很不相同的蘑菇云式爆发沸腾照片.试件表面及临近表面的微薄液层内瞬间爆发生成大量大小相当的细小汽泡,汽泡脱离直径远低于经典Fritz公式计算值,上浮速度先快后慢.     

强爆轰驱动超高速碎片发射装置设计因素分析

为了得到发射装置设计因素和超高速碎片性能间的关系,考虑了药型罩的材料、炸药种类、装药长径比、药型罩的锥角、药型罩的厚度、药型罩顶部靠近装药侧的曲率半径等设计因素,采用AUTODYNTM,结合正交试验,对超高速碎片的发射过程进行数值模拟。结果表明,3种发射装置结构分别可以提供质量为1. 533 g的紫铜碎片、速度为11. 649 km/s的铝碎片、动能为85. 6 k J的铝碎片; 2种发射装置结构均可以提供质量大于1 g、速度高于11 km/s的密实结构圆柱状碎片。验证了仿真方法的可信性,对影响碎片性能的设计因素进行了分析、排序,并得到了这些设计因素与碎片质量、速度、动能的关系。     

基于ANSYS／LS—DYNA的电子装备爆炸冲击振动损伤建模研究

针对电子装备爆炸冲击振动损伤问题，设计了损伤模拟的基本方案；采用ANSYS／LS—DYNA建立了二维“爆炸源-地面-弹性体-电子装备”模型；通过模型试验，获得了与实际爆炸冲击振动特性相吻合的加速度、位移和应力等数据。     

聚能射流形成过程的理论建模与分析

分析了聚能射流的形成过程,并对其中的各阶段进行了详细建模。在模型中考虑了炸药爆轰、金属的驱动、药型罩压垮以及射流和杵体的形成过程。采用该模型对某一聚能装药结构进行了计算,计算结果表明:药型罩顶部和底部微元的压垮速度较小,在射流头部形成反向速度梯度,与试验数据吻合较好。该模型对于多级侵彻战斗部的工程设计与侵彻参数的计算具有一定的参考价值。     

Countering the effects of IED systems in Afghanistan: an integral approach

The current approach to countering the threat of improvised explosive devices (IEDs) in Afghanistan has met with limited success. The relative lack of success may be in part because the current approach is not holistic and discounts the social systems that foster the IEDs. Insurgents are using IEDs as a tool to further their strategic aims, but the coalition and to a lesser extent the Government of the Islamic Republic of Afghanistan (GIRoA) are attacking the IEDs as if they are an end in and of themselves. Combining network disruption with information change maximizes the opportunities for mitigating the IED threat. More specifically, to mitigate the IED threat requires disrupting the social and economic systems associated with IEDs, and at the same time providing alternative economic opportunities and improving rule of law and governance at the local level. In other words, counter-IED (C-IED) must be Counter-Insurgency (COIN) centric to be successful. This paper reviews the current state of C-IED efforts, identifies five main problems with the current approach, and suggests changes to reduce or mitigate the IED threat in Afghanistan.     

子母式穿甲弹子弹发射过程研究

对子母式穿甲弹子弹的发射过程进行详细的分析,得出了子弹长度与子弹飞离母弹速度的关系、子弹长度与火药燃烧率的关系、子弹长度与母弹弹头部发射孔内最大压力的关系以及子弹的长度与子弹发射所需时间的关系,为子母式穿甲弹设计提供了依据。     

命中角对防护结构口部爆炸毁伤影响的数值分析

为研究装药命中角对防护结构口部爆炸毁伤的影响规律,对直墙拱结构进行了一系列爆炸模拟分析,得到了直墙拱结构拱顶、拱脚和直墙底3个位置的爆炸应力和位移时程曲线。通过分析这3个位置的应力峰值和位移峰值,发现随着装药命中角的增大,拱顶处竖直方向荷载减小,而拱脚处水平方向荷载增大;随着装药命中角的增大,拱顶处竖直方向位移变形减小,而拱脚处水平方向位移变形增大。模拟分析得到的命中角对防护结构口部爆炸毁伤的影响规律,可供防护工程设计时参考。     

Study of nano-nitramine explosives: preparation,sensitivity and application

Nano-nitramine explosives (RDX, HMX, CL-20) are produced on a bi-directional grinding mill. The scanning electron microscope (SEM) observations show that the prepared particles are semi-spherical, and the narrow size distributions are characterized using the laser particle size analyzer. Compared with the micron-sized samples, the nano-products show obvious decrease in friction and impact sensitivities. In the case of shock sensitivities, nano-products have lower values by 59.9% (RDX), 56.4% (HMX), and 58.1% (CL-20), respectively. When nano-RDX and nano-HMX are used in plastic bonded explosives (PBX) as alternative materials of micron-sized particles, their shock sensitivities are significantly decreased by 24.5% (RDX) and 22.9% (HMX), and their detonation velocities are increased by about 1.7%. Therefore, it is expected to promote the application of nano-nitramine explosives in PBXs and composite modified double-based propellants (CMDBs) so that some of their properties would be improved.     

炸药热安定性的快速评定方法

本文分析了量气法和热分析法评定炸药热安定性的问题,提出把由一条DSC曲线测得的热分解动力学参数引入热平衡方程,以数值模拟方法计算出炸药在一定环境温度下的热爆炸延滞期,并据此判别炸药热安定性的观点和方法。经实验验证,该方法快速、准确。     

多爆炸成型弹丸性能参数灰关联分析

为了获得各参数对多爆炸成型弹丸毁伤性能的影响程度,以EFP速度和MEFP发散角为参考序列,以药型罩和装药参数为比较序列,运用灰关联理论对影响MEFP毁伤性能的参数进行了灰关联分析。在此基础上,应用灰关联分析结果完成了MEFP战斗部优化设计。结果表明:在较少样本空间前提下,采用灰关联理论可以分析获得影响多爆炸成型弹丸毁伤性能的各因素主次关系,而且经过优化后的MEFP战斗部,大大地提高了EFP的集聚性和毁伤性能。