短脉冲激光作用下爆发沸腾的温度及汽泡行为研究

采用短脉冲激光加热浸没在丙酮液池的铂薄膜电阻的方法,以及高压电火花单次放电高速照相技术,在国内首次建立了超急速爆发实验台,达到了微秒级的温度频响和2×106帧/s的高速照相.研究发现,随着激光热流密度增加,试件表面温度快速升高到一饱和值,与过热液体的动力学理论极限温度非常接近.拍摄到了与常规沸腾很不相同的蘑菇云式爆发沸腾照片.试件表面及临近表面的微薄液层内瞬间爆发生成大量大小相当的细小汽泡,汽泡脱离直径远低于经典Fritz公式计算值,上浮速度先快后慢.     

瞬态温度场有限元法求解的研究

介绍了瞬态热分析的定义和步进积分的特点;研究了两点时问差分格式的瞬态导热温度场有限元法数值解的稳定性和振荡现象;比较和分析了几种差分格式的特点,并应用算例对几种差分算法进行了验证;总结说明了几种差分算法在实际当中的应用。     

H2O2/HTPB固液混合发动机点火试验研究

利用H2O2催化分解原理,设计了烃类燃料在催化分解的90%H2O2中能燃烧的点火器,然后采用该点火器进行H2O2/HTPB固液混合发动机点火试验研究.试验结果表明,该点火器能够成功启动H2O2/HTPB固液混合发动机,且当混合比偏离最佳混合比后,发动机的燃烧效率降低.     

F—K理论在堆积固体自燃火灾调查中的应用

堆积固体自燃火灾是常见多发火灾，由于其规模庞大、着火延迟期长等特点，难以进行全尺寸的模拟实验，为火灾预防和调查工作带来了一定的难度。基于F—K（Frank—Kamenetskii）理论，将小规模实验结果外推，从而预测或判断一定尺寸的堆积固体在一定的环境温度下自燃起火的危险性。     

Stochastic modeling for computational warranty analysis

We examine two key stochastic processes of interest for warranty modeling: (1) remaining total warranty coverage time exposure and (2) warranty load (total items under warranty at time t). Integral equations suitable for numerical computation are developed to yield probability law for these warranty measures. These two warranty measures permit warranty managers to better understand time‐dependent warranty behavior, and thus better manage warranty cash reserves. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

Transient analysis of Markov models of fault‐tolerant systems with deferred repair using split regenerative randomization

The (standard) randomization method is an attractive alternative for the transient analysis of continuous time Markov models. The main advantages of the method are numerical stability, well‐controlled computation error, and ability to specify the computation error in advance. However, the fact that the method can be computationally very expensive limits its applicability. In this paper, we develop a new method called split regenerative randomization, which, having the same good properties as standard randomization, can be significantly more efficient. The method covers reliability‐like models with a particular but quite general structure and requires the selection of a subset of states and a regenerative state satisfying some conditions. For a class of continuous time Markov models, model class C₂, including typical failure/repair reliability‐like models with exponential failure and repair time distributions and deferred repair, natural selections are available for both the subset of states and the regenerative state and, for those natural selections, theoretical results are available assessing the efficiency of the method in terms of “visible” model characteristics. Those results can be used to anticipate when the method can be expected to be competitive. We illustrate the application of the method using a large class C₂ model and show that for models in that class the method can indeed be significantly more efficient than previously available randomization‐based methods. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

带空气室脉冲水射流系统通用分析法

针对所提出的用空气室引发水力共振以增强脉冲水射流的设想,应用水力瞬变特征线解法,建立系统的数学模型,差分网格只取脉冲源、空气室和喷嘴3个边界点,采用变时步法解算。这种方法具有灵活性大、受限制小、便于使用的突出优点。     

大功率IGBT器件及其组合多时间尺度动力学表征研究综述

在提出电力电子器件及其组合多时间尺度动力学表征需求的前提下,以目前常用的全控型电力电子器件——绝缘栅双极晶体管(Insulated Gate Bipolar Transistor,IGBT)为例,系统分析并归纳了目前在IGBT及其组合多时间尺度动力学表征研究方面的进展和成果,包括作为基础的大功率IGBT及其组合多时间尺度电热瞬态建模方法、基于模型的大功率IGBT模块失效量化表征方法以及用于辅助分析的IGBT组合多速率仿真方法。此外,介绍了基于IGBT多时间尺度模型的装置应用设计案例。从建模方法、可靠性评估、仿真手段以及应用设计四个方面系统全面地阐述了大功率IGBT及其组合多时间尺度的动力学表征方法,可为电力电子混杂系统的精确设计提供电力电子器件层面的理论和技术支撑。     

利用样条插值法计算摩擦离合器瞬时转速曲线

研究了履带车辆主离合器瞬时转速测试方法,在数据处理过程中两次运用样条插值算法,较好地解决主、被部分实测转速精度低及转速数据长度不一致的问题,得到较为理想的瞬时转速曲线。     

关于雷达角跟踪性能测试方法的探讨

基于雷达跟踪目标最大角速度和角加速度的定义,分析了用雷达跟踪目标最大角速度和角加速度表征雷达跟踪性能的可行性,并对角误差信号的模拟方法进行了讨论。介绍了一个可以测试幅频特性、暂态特性、雷达跟踪目标最大角速度和角加速度的测试系统设计思想。